







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterQuartz & Granite Countertops in Glendale, CA
Quartz and granite countertops in Glendale typically run $65 to $140 per square foot installed, including templating, fabrication, and edge work, with most full kitchen replacements landing between $4,800 and $11,500. Quartz is an engineered slab made from ground stone bound with resin, so the pattern is consistent and never needs sealing. Granite is natural stone cut from a single block, so no two slabs match and it needs periodic sealing. We fabricate both, source slabs through Cambria, Caesarstone, and Silestone, and put a flat written price in front of you before a template tool touches your kitchen.
Our technicians have up to 19 years of experience setting stone, and every countertop job runs through the same documented process we use on a full Kitchen Remodeling project. If you’re weighing countertops for a 1950s ranch off Adams Hill or a newer build near the Americana, the stone decision usually comes down to three things: how much you cook, how visible the edge is, and how much variation you actually want to live with. Call (844) 320-5930 and we’ll talk through it.

Key Takeaways
- Quartz and granite installed in Glendale: roughly $65 – $140 per square foot, $4,800 – $11,500 for a typical kitchen.
- Quartz never needs sealing; granite does, once a year on average for most finishes.
- Templating happens after cabinets are set, never before. Rushing this step is where slabs crack.
- Every Rowan job includes a written flat price, a signed change order rule, and a documented photo record of the install.
When You Need Quartz & Granite Countertops
Countertops aren’t an emergency, but there are specific moments when replacing them is the right call rather than a nice-to-have. Here’s what we hear from Glendale homeowners most often:
- The old laminate is failing at the seams. In the 1920s – 1950s bungalows around Tropico and downtown Glendale, we regularly see laminate lifting along the sink edge where years of water have gotten under the substrate. Once the particle board beneath is swollen, no adhesive fixes it. New stone over fresh substrate does.
- You’re already remodeling the kitchen. If cabinets are coming out for new boxes or new fronts, doing the countertop at the same time saves the cost of templating twice. Cambria and Caesarstone slabs cut once, fitted once.
- The counter is a chop job from a prior owner. Mismatched granite sections, uneven edge profiles, or a peninsula that was clearly cut by hand. We see this a lot in homes flipped between 2015 and 2022.
- You’re adding an island or a peninsula. A 36-inch or larger island changes how the whole kitchen works, but it needs a stone top rated for that overhang. Anything past 12 inches of unsupported overhang needs a corbel or steel support beneath it.
- Staining or burns you can’t clean. Granite with sealer worn off will take on oil stains from cooking. Replacing the affected run, or the whole top, ends the cycle.
- A rental or ADU upgrade. Glendale’s ADU rules mean a lot of homeowners are finishing a second unit and want a quartz top that’s durable and easy to maintain between tenants. Quartz is the better choice there than natural stone.

Our Quartz & Granite Countertops Process
- In-home measurement and slab selection. We measure the existing layout, check cabinet level and integrity, and note where plumbing and electrical cut-outs land. Then we walk you through slab options – 2cm versus 3cm thickness, edge profiles, and the difference between Cambria’s quartz patterns and a natural granite from a local supplier. You’ll get a written flat price before any deposit.
- Templating. Once base cabinets are installed and level, a technician templates the exact counter outline, including sink cut-out and any overhang. This is a physical or digital template, not a measurement from a drawing, and it’s the step that prevents slabs from cracking or gaps appearing along the wall.
- Fabrication. The slab is cut, edged, and finished at the fabricator’s shop. Sink holes, cooktop cut-outs, and backsplash pieces are all cut to the template. If your faucet needs a wider spread or an undermount sink needs a specific cut, this is when that’s locked in.
- Installation. The old top comes off, substrate is prepped, and the new slab is set with adhesive and shimmed level. Undermount sinks are attached to the underside of the stone before it’s placed. We photograph the substrate, the adhesive, and the final set before we leave.
- Sealing and clean-up. New granite gets a penetrating sealer applied on site. Quartz doesn’t need it. We caulk the wall joint, check all seams against a straightedge, and clean the surface so you can inspect every inch.
- 365-Day Done Right Promise. If a seam separates, an edge chips from a defect in our work, or the top isn’t sitting flat within the first year, we come back and fix it – under The Haven Standard, backed by written terms, not a handshake.
Quartz & Granite Countertops Pricing in Glendale
Here’s a real line-item breakdown of what quartz and granite countertops cost installed in the Glendale market. These ranges cover typical kitchen jobs – 30 to 50 square feet of counter surface – with standard edge profiles. Custom edges, waterfall ends, and thick mitered edges run higher.
| Line Item | Typical Range |
|---|---|
| Quartz material + fabrication + install (2cm) | $65 – $110 per sq ft |
| Quartz material + fabrication + install (3cm) | $85 – $135 per sq ft |
| Granite material + fabrication + install | $60 – $120 per sq ft |
| Templating | $150 – $400 |
| Sink cut-out (undermount) | $150 – $350 |
| Cooktop cut-out | $100 – $250 |
| Removal and haul-away of old countertops | $200 – $500 |
| Backsplash (matching stone, 4-inch) | $25 – $55 per linear ft |
| Waterfall edge or mitered edge | $400 – $1,200 added |
A standard 40-square-foot kitchen with a single undermount sink cut-out and a 4-inch backsplash comes in around $5,200 to $7,800 for quartz at the mid-range. Granite can run lower on a discounted slab, or higher on a premium exotic. We name a specific brand in writing – Cambria, Caesarstone, Silestone, or a natural granite from a supplier we’ve vetted – so the number you approved is the number you see at install.
What drives the price above the base? Slab size and yield, edge profile, number of seams, and whether the cabinets are level (an unlevel cabinet run means extra shimming and sometimes substrate replacement). We put all of it in the written scope. No work starts on any change until the change order is signed – Clause 1 of The Haven Standard, and the reason projects finish within a few percent of the price you agreed to.
We also offer a Free Second Opinion on any written countertop estimate you’re holding. Bring a competitor’s quote and we’ll review it line by line at no charge.
Is it cheaper to repair or replace a countertop?
Repair is cheaper in a narrow set of cases: one chipped edge on granite that can be filled and polished, a single failed seam on a laminate, or a sealer refresh on granite that’s staining but structurally sound. In most Glendale cases – a laminate top with swollen substrate, a set of mismatched chops, or a quartz surface with a fracture – replacement is the only durable fix. A chip repair runs $150 – $350; a full quartz replacement runs $2,500 or more depending on size. If you’re unsure which side of the line you’re on, call (844) 320-5930 and we’ll tell you honestly, without a sales pitch.
What’s the difference between quartz and granite for a kitchen?
Quartz is engineered from ground stone and resin, so it’s non-porous, doesn’t need sealing, and has a consistent pattern slab to slab. Granite is natural stone, unique per slab, and needs sealing roughly once a year in most kitchens. In a Glendale kitchen with heavy daily cooking, quartz holds up with less maintenance. If you want a stone that exists nowhere else in the world, granite wins. We install both and won’t push one over the other without telling you the trade-offs in writing.
FAQs – Quartz & Granite Countertops
How much do quartz countertops cost in Glendale?
Quartz countertops in Glendale run $65 – $135 per square foot installed for standard 2cm and 3cm thickness, which lands most full kitchens between $4,800 and $9,800 with templating, fabrication, and a sink cut-out included. Premium Cambria or Caesarstone patterns push toward the top of the range. Call (844) 320-5930 for an exact written price – estimates are free.
Can you install countertops the same day?
No. A countertop install in Glendale is a two-visit process at minimum: one visit to template, one to install after fabrication, usually 7 to 14 days apart depending on slab availability and edge work. Same-day install happens only when replacing an existing top with a pre-fabricated slab that matches the exact template, which is rare. We’ll give you the timeline in writing before work starts.
Do I need to move out during countertop installation?
No, but the kitchen will be unusable for one to two days during the install. The sink and cooktop are disconnected on install day, so plan for a day or two of eating out and a cooler for the fridge items. We photograph the setup and the final install, so you have a documented record of what we found and what we did.
Is granite hard to maintain in a Glendale kitchen?
Granite needs resealing about once a year, and that’s it. Apply a penetrating sealer, let it sit, buff it off – a 30-minute job. In Glendale homes where granite has gone unsealed, we see oil staining along the cooktop run, but that’s a maintenance lapse, not a stone flaw. Quartz needs no sealing at all. If low maintenance is the priority, quartz is the simpler choice, and we’ll tell you that straight.
What’s the best countertop for a Glendale kitchen with a lot of cooking?
Quartz in a mid-tone or patterned finish is the practical pick for a heavy cooking kitchen, because it resists staining, doesn’t need sealing, and doesn’t show scratches the way polished granite can. Silestone and Caesarstone both make patterns that hide crumbs and heat marks well. That said, if you want natural stone and you’re willing to seal annually, granite performs beautifully for decades.
Get a Written Countertop Price Before You Commit
Every Rowan Construction Group Glendale countertop estimate is a flat written price with a written scope, a named slab or brand, and a written warranty – never “call for a quote.” A live person answers the phone 24/7, our crews are background-checked and uniformed, and every visit ends with a documented photo record you keep. That’s the Haven Standard, and it’s why our kitchen countertop work finishes within a few percent of the number you approved. Call (844) 320-5930 for a free estimate, or if you’d like to see the full scope of what we do in a kitchen, start with the kitchen remodeling and construction work we offer.
Written by the team at Rowan Construction Group Glendale, serving Glendale.


