







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWhat a Small Kitchen Remodel Really Costs in Glendale, CA
A small kitchen remodel in Glendale runs $14,000-$45,000 for the full scope, and the tight $9,000-$20,000 band is where most projects start before hidden conditions are uncovered. In Glendale’s 1920s-1940s housing stock, galvanized steel plumbing, knob-and-tube wiring, and asbestos floor tile routinely surface after demo, and those three conditions alone can add $11,500-$20,500 to the number on your estimate. Rowan Construction Group Glendale writes all three contingency figures into the quote before a single cabinet comes out. Call (844) 320-5930 for a free estimate with every number in writing.

Why a Glendale Small Kitchen Costs More Than the National Range
Most cost guides publish a national figure and move on. That figure doesn’t account for what’s actually behind the wall in a 1938 Spanish Colonial on Adams Hill or a Craftsman bungalow off Chevy Chase. In Glendale, the demo is where the budget gets tested, and the pre-1950 homes in these neighborhoods almost always have something to test it. Galvanized supply and drain lines that have been in the ground for 80-plus years, knob-and-tube electrical fed through the ceiling cavity, and vinyl or linoleum laid over asbestos tile are standard finds, not edge cases. None of them appear in a $15,000-$30,000 national range because that range assumes a house with modern infrastructure. A Glendale kitchen doesn’t get that assumption.
Our technicians have up to 19 years of experience working in homes just like these, and they know what to look for before demo day. We inspect the visible plumbing, check the panel, and probe the floor tile condition during the estimate so half the surprises become line items you already approved.
Line-Item Costs for a Glendale Small Kitchen (Under 150 Sq Ft)
Here’s what each component costs in Glendale right now. These figures cover materials and labor for a kitchen under 150 square feet, before any hidden-condition work.
| Line item | Cost range |
|---|---|
| Cabinets (KraftMaid semi-custom or Wellborn full-access) | $6,000-$14,000 |
| Countertops (Cambria quartz or Caesarstone slab) | $2,800-$7,500 |
| Fixtures (Kohler or Toto sink and faucet) | $900-$2,200 |
| Tile labor and materials (backsplash and floor) | $1,800-$3,500 |
| Demo and disposal | $1,200-$2,000 |
| Permit (Glendale fee schedule) | $400-$900 |
Total for a standard Glendale small kitchen: $14,000-$45,000 depending on cabinet line, countertop material, and tile selection. Add the hidden-condition numbers below if your home was built before 1950.

The Three Hidden-Condition Costs No National Guide Will Quote You
Galvanized drain and supply replacement: $4,500-$9,000. If the demo opens a wall and the pipes are gray steel with threaded fittings, they’ve reached the end of their service life. Repairs on galvanized lines are a stopgap. Full replacement means PEX or copper, new shutoffs, and potentially re-routing through a floor or ceiling cavity.
Asbestos floor tile abatement under vinyl or linoleum: $2,800-$5,500. Tile mastic from the 1940s through the 1970s frequently contains asbestos. Cutting into it without proper abatement spreads fibers through the house. Licensed abatement crews remove the material, and the space is re-inspected before finish work begins. That’s not a cost you can skip and hope for the best.
Knob-and-tube electrical remediation: $2,500-$5,000. A kitchen today runs a refrigerator, a dishwasher, a microwave, a range hood, and multiple countertop circuits. Knob-and-tube wiring can’t carry that load safely and was never designed to be buried under insulation. Bringing kitchen circuits to current code usually means new runs from the panel and possibly a panel upgrade from 100-amp to 200-amp service at $3,200-$6,000 on top.
How Rowan Handles a Hidden Condition When Demo Reveals It
Demo stops the moment a condition is found. We photograph everything, document what we found in plain terms, and present a written change order with a dollar amount attached. Work resumes only after you sign. That’s the discipline behind Rowan’s record of finishing projects within a few percent of the agreed price across 4,000-plus jobs since 2007.
The signed change order protects both sides. You’re never surprised by a number on an invoice. We’re never asked to eat a cost nobody knew about. And the 365-Day Done Right Promise backs the finished work with a terms page, not an asterisk.
KraftMaid vs. Wellborn: What the Cabinet Line in Your Quote Actually Means
KraftMaid semi-custom cabinets run $180-$340 per linear foot installed with a 3-4 week lead time. That’s the workhorse line for a Glendale small kitchen. You get semi-custom sizing, decent finish options, and a schedule that keeps the project moving. Wellborn full-access cabinets run $260-$480 per linear foot installed with a 6-8 week lead time. That includes full-extension drawers, better internal hardware, and dimensions that can accommodate an odd wall or a non-standard island.
Both are specified in writing on the Rowan quote. If the cabinet line item says KraftMaid, you’re paying KraftMaid prices. Nothing gets upgraded without a change order. For the full scope of what’s available, see our Kitchen Remodeling page, or our Kitchen Remodeling in Glendale service page for the full project walkthrough.
Does Glendale Require a Permit for a Small Kitchen Remodel?
Yes, if the work touches electrical panel changes, moved plumbing supply lines, or structural wall removal. Glendale’s building department enforces some of LA County’s strictest residential permitting, and unlike some neighboring cities, it inspects the sequencing carefully. A permit runs $400-$900 on the Glendale fee schedule for a typical small kitchen scope.
Skipping the permit creates an unpermitted improvement you must disclose at sale, and it can void your homeowner’s insurance claim if a later water or electrical event traces back to work that was never inspected. It’s not a corner worth cutting. Here’s a short checklist of what triggers a permit:
- Panel upgrade or any new electrical circuit run from the panel
- Moving supply or drain lines, even a few inches
- Removing or altering any wall that may be structural
- Adding a range hood that vents through an exterior wall
- Converting a closet or pantry into kitchen square footage
What a Glendale Homeowner Actually Receives
Every Rowan estimate is a flat written price with a written scope and a written warranty – “call for a quote” isn’t a process step here, it’s a different way of doing business. Before the crew arrives, every technician is background-checked and uniformed. Every visit includes a documented photo record as a standard deliverable, not an upgrade, so you have evidence of what was found and what was done when the crew leaves. And if you already have a quote from another contractor, we’ll review it line by line at no charge: our Free Second Opinion on Any Written Estimate exists precisely because hidden conditions in Glendale homes get missed in most estimates.
FAQs
A small kitchen remodel in Glendale runs $14,000-$45,000, with the tight scope landing in the $9,000-$20,000 range. Add $11,500-$20,500 if the home is pre-1950 and the demo uncovers galvanized plumbing, asbestos floor tile, or knob-and-tube wiring. Call (844) 320-5930 for a free estimate with every contingency in writing – estimates are free and take about 45 minutes.
Full replacement is almost always the better spend once galvanized lines are exposed. Patching a galvanized line costs $800-$2,000 and leaves the rest of the system on borrowed time, while full replacement runs $4,500-$9,000 and gives you decades of service. In a 1930s Glendale kitchen, that replacement is a one-time decision made inside the remodel rather than a separate disruptive project a few years later. Call (844) 320-5930 to get both numbers written out before you decide.
Yes. Rowan answers calls with a live person 24/7 and can schedule a free written estimate within the week, usually faster. You’ll get a flat written price with a written scope and a written warranty before any work starts, and if you already have a competing quote we’ll review it line by line at no charge. Call (844) 320-5930 to book the visit.
Yes, if the work involves a panel change, moved plumbing supply lines, or structural wall removal. A typical Glendale small kitchen permit runs $400-$900 on the city’s fee schedule. Skipping it creates an unpermitted improvement that must be disclosed at sale and can affect a future insurance claim. Rowan pulls permits as part of every project that requires one – call (844) 320-5930 and we’ll confirm what your specific scope triggers.
Get a Written Price Before the Demo Starts
Small kitchen remodels in Glendale run $14,000-$45,000, and the hidden conditions behind your walls can add $11,500-$20,500 if they surface. Rowan Construction Group Glendale puts every number – including those contingencies – into a flat written price before work begins. Call (844) 320-5930 for a free estimate, bring a competitor’s quote for a line-by-line second opinion at no charge, and get the 365-Day Done Right Promise in writing. Start at our home page to see all seven trades.
Written by the team at Rowan Construction Group Glendale, serving Glendale, CA.
What Our Customers Say
"They found an old septic line under the driveway run and stopped, documented it, and re-quoted before continuing."
- Xavier L."Driveway replaced properly with a base that will actually last. They explained why the cheaper quote was cheaper."
- Reggie O."Fence and retaining wall along a sloped boundary. They photographed the footing depth at each post, which mattered when the county inspector came."
- Iona F.












