







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Temple City, CA
We provide independent CGI construction and window service across Temple City, and the one thing that shapes our CGI work here is this: most projects aren’t new construction, they’re additions and ADU builds on tightly permitted 1950s-60s ranch lots, so CGI glazing decisions get made and remade as lot-coverage numbers settle. We’re an independent San Gabriel Valley contractor, not affiliated with CGI, and we read their product lines against real Temple City building conditions. Call (844) 320-5930 for a free estimate.
Why Temple City Residents Choose Us for CGI Service

We know CGI’s window and door families the way you know a house you’ve worked on for years – the Select series vinyl windows, the Series 5000 aluminum sliders, the custom patio and entry door packages, the thermally broken aluminum window walls. That familiarity matters on Temple City rehabs because the original CGI aluminum sliders seated in 1960s sills are still all over this city, and knowing how those frames drain, how the rollers wear, and where the weatherstripping gives out is what separates a repair from a replacement.
We specify OEM-compatible CGi glass units, rollers and weatherstripping so the frame and drainage channels stay compatible, and we source parts per job rather than claiming local stock. Every project gets a written price before work starts, and our technicians have up to 19 years of experience. As an independent provider, our record on Temple City jobs is what we stand behind.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common CGI Construction Problems We Solve in Temple City
- Fogged dual-pane glass on CGI vinyl sliders. San Gabriel Valley heat cycling and afternoon sun break down the sealed insulated glass unit over time, leaving a white haze between the panes. We replace the IGU with an OEM-compatible unit rather than pushing a whole new window.
- Seal and weatherstrip failure on CGI aluminum sliders. Santa Ana wind events drive fine dust and grit into the track, and worn seals let it in. The door then drags and the screen wears at the same time. We replace the weatherstripping and rollers to stop the grit from grinding the track.
- Roller and screen-track wear on CGI patio doors. On Temple City lots where the original sill has settled with the expansive clay, doors were often shimmed to compensate, and the rollers take the load. That’s why they jump or jam mid-track.
- Condensation and frame sweat on single-pane or early dual-pane units. When an addition encloses a patio or changes interior humidity, old CGI units start sweating. New glazing spec or added ventilation solves it.
- Out-of-square openings after soil movement. The long dry season followed by winter rains cracks driveways and slabs, and the same movement racks window openings. We check sill level and flashing before re-glazing.
CGI Service in Temple City: What Local Conditions Mean for Your Equipment
Here’s the local fact that drives almost every CGI glazing decision in Temple City: the city’s permitting review scrutinizes lot coverage and floor-area ratio hard on these small 6,000-8,000 sq ft ranch parcels. That means window and glazing scope on an addition or ADU is often redrawn late in the process. Opening sizes, egress requirements, and the CGI product selection can shift after the initial design. On a typical Temple City ranch-lot addition, the original rear windows are CGI aluminum sliders seated in a 1960s sill that has settled with the expansive clay soils, so the new wall framing and the old opening no longer share a plane. A qualified local pro usually pulls the units, checks sill level and flashing, swaps failed glass and rollers for OEM-compatible parts where the frames are sound, and re-flashes the opening before the addition closes it in. Tear-out and glazing get scheduled early morning during hot, dry stretches so the sealant cures before the afternoon sun hits.
CGI Models & Products We Service in Temple City
We service the CGI Select series vinyl windows, the Series 5000 aluminum sliding windows, custom patio door and entry door packages, and thermally broken aluminum storefront-style window walls. For like-for-like replacement we specify CGI OEM glass units, rollers and weatherstripping so the frame and drainage channels stay compatible. Quality aftermarket hardware is reasonable for screens and locks. Where frames are sound, glass and hardware replacement is usually the honest call; full replacement only makes sense once the frame is pitted, out of square, or the opening is being reworked for an addition. Our CGI service covers all of these lines.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Temple City
| Service | Typical Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Home Addition | $45,000 – $130,000 |
| ADU Construction | $90,000 – $220,000 |
| Roof Repair | $400 – $1,800 |
| Roof Replacement | $8,000 – $20,000 |
Cost is driven by how many units are affected, whether frames are sound enough for a glass-only swap, and whether the opening is being rebuilt for an addition. A free estimate includes the photo record and a written line-item price before work starts. Call (844) 320-5930 for an exact quote for your Temple City project.
Serving Temple City, CA – Our Local Coverage Area
We serve Temple City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Temple City
Yes, in most cases. If the vinyl frame is sound, we replace the fogged insulated glass unit with an OEM-compatible one and keep the frame and drainage channels intact. That’s usually thousands cheaper than a full window run.
Sometimes. Temple City’s review is strict on lot coverage and floor-area ratio, and glazing scope can shift late, so plan for a possible redraw of opening sizes and egress. We build that flexibility into the written scope.
Worn weatherstripping and rollers are the usual cause. Santa Ana wind pushes grit into the track, and once the seal is shot the door drags. Replacing the weatherstripping and rollers solves it. Call (844) 320-5930 to schedule an assessment.
Usually after framing and roofing are watertight, so the openings are final. Do the tear-out and glazing early morning on hot, dry stretches so sealant cures.
No. We’re an independent contractor, not authorized, sponsored, or endorsed by CGI. Our credibility comes from specifying and troubleshooting these systems on small, tightly permitted Temple City lots.
Service Areas Near Temple City
We also serve homeowners in Glendale, Pasadena, South Pasadena, Altadena and the neighborhoods around East San Gabriel and Rosemead. See our Temple City service area page for the full coverage map.
Book Your CGI Service in Temple City Today
Have a fogged slider, a sticky patio door, or an addition where the glazing scope keeps moving? Call (844) 320-5930 for a free estimate with a written price and a photo record. We’ll tell you what we found and what it means, in plain terms.
Written by the team at Rowan Construction Group Glendale.












