







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Glendale Homeowners Choose CGI Construction
Rowan Construction Group Glendale provides independent construction, repair and installation service for CGI materials, fixtures and finishes in Glendale homes – walk-in showers and frameless enclosures, quartz and granite countertops, and stocked cabinet lines. What makes our CGI work different is that we quote a flat written price before anyone picks up a tool, work only to CGI’s published tolerances and trim profiles, and hand you a documented photo record when the crew leaves. We’re an independent provider, not affiliated with or authorized by CGI. Call (844) 320-5930 for a free estimate.
Why Trust Rowan Construction Group Glendale for Your CGI Construction?

Our technicians have up to 19 years of experience, and much of that has been spent on CGI products specifically – the Ready-Fit framed and frameless shower series, the quartz and granite slab program, and the shaker and slab-front cabinet lines. That means we know a CGI enclosure door that won’t sit flush usually isn’t the hinge; it’s a curb that has swelled from years of water tracking under a tired sweep. We read the specification sheet, check the tolerances in the room, and tell you what the material will actually do in your house.
Parts matter. We specify genuine CGI components where the part is visible or load-bearing – hinges, door seals, slab-matched edge profiles and trim – and quality aftermarket hardware where it’s functionally equivalent and easier to service later. Warranty-safe practice is the standard here: we won’t drill a slab edge that voids a finish warranty, and we won’t bury a movement joint in rigid sealant. Under Clause 1 of The Haven Standard, the price is written before anyone starts, every time.
That discipline has held project costs within a few percent of the agreed number across 4,000-plus jobs. For Glendale, we’re talking about homes where the walls and the ground both have opinions – more on that below.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common CGI Construction Problems We Fix in Glendale
What follows is what we actually find when we open up a job. These are the failure modes, in order of how often they show up.
- Framed shower enclosures where the bottom sweep and door seal fail first. The sweep is the flexible strip at the base of the door; once it hardens or tears, water tracks past it onto the curb and wicks into the framing behind the tile. In a 1920s Spanish Colonial in Adams Hill, that framing is often original, and it doesn’t take much moisture to soften it.
- CGI quartz slabs over an out-of-plane cabinet run. If the cabinet boxes aren’t level, the slab bridges the gap and rocks. Within a few seasons you get visible lippage at the seam and hairline cracks at the sink or cooktop cutout – the thinnest point in the stone. The stone isn’t failing. The substrate under it is.
- Cabinet boxes and drawer glides loosening at the screw line. Older Glendale homes in Chevy Chase and elsewhere are plaster over lath, not drywall over studs. Without proper blocking behind the plaster, screws hold for a while and then let go, and the glides go out of alignment.
- Tile and trim at outside corners and shower niches. Where detail is done with sealant instead of a movement-tolerant joint, the sealant fails as the house moves and you get efflorescence – the white mineral bloom that means water is passing through – plus grout loss at the niche corners.
- Frameless enclosure installs where glass clearance wasn’t measured to the finished tile plane. The door swings into a wall that wasn’t there when the unit was templated, or the panel can’t sit plumb because the curb is out of level. That’s a layout error, not a glass defect.
CGI Parts & Our Repair-vs-Replace Approach

Here’s how a typical CGI shower job usually goes. The door no longer closes flush, and the grout at the curb is soft and discolored. The enclosure itself is fine. What’s happened is the seal has been letting water past for a season or two, and the substrate behind the tile has been absorbing it. A qualified local pro pulls the enclosure, checks the curb and framing for softness, rebuilds the pan and waterproofing if it needs it, then resets the glass with new CGI seals and hinges so the door swings true. On the countertop side, the same pattern shows up as a CGI quartz top that rocks slightly on an uneven run – and the fix is to re-set and shim the cabinets before the slab goes back down, not to shim the stone.
That’s the repair-versus-replace decision in plain terms. When the enclosure or slab is sound and a seal, glide or hinge has failed, honest repair is the right call. When the substrate or framing behind it is compromised, replacement is the only durable answer, and we say so up front rather than halfway through. We source parts per job against the exact CGI model number – we don’t claim to stock locally. Call (844) 320-5930 for a free second opinion on any written estimate, including one from another contractor.
Our CGI Service Process – Step by Step
- 1
Diagnosis. We photograph the condition as we find it – the curb, the framing behind the tile, the plane of the cabinet run, the sealant joints at the niche. You get a written scope describing what we found, not a verbal impression.
- 2
Written price and signed scope. A flat written price covering materials and labor, with the CGI part numbers named. No work proceeds on a change until the change order is signed. That’s the administrative discipline that keeps jobs within a few percent of the agreed cost.
- 3
Repair or install. CGI components specified to the model; blocking installed where plaster walls need it; movement joints detailed at corners and niches instead of filled with sealant.
- 4
Test. For enclosures, a water test on the curb and pan before we call it done. For slabs, a level check across the full run and a look at every cutout edge.
- 5
Photo record and written warranty. Background-checked, uniformed technicians, and the documented photo record included as standard on every visit. The 365-Day Done Right Promise backs the work in writing.
See the difference
Before
After
Before
After
Before
AfterCGI Products We Service & Install in Glendale
We work across the full CGI product range you’d use in a Glendale bathroom or kitchen: the Ready-Fit framed and frameless shower enclosure series, the quartz and granite slab program for kitchen and bath surfaces, the stocked shaker and slab-front cabinet lines, and the tile and trim collections used for backsplash, shower and flooring work. That covers walk-in showers and shower remodeling, frameless glass enclosures, and quartz and granite countertops – which are the three areas where CGI products show up most in Glendale homes. If you have the model number or series name, bring it to the estimate. If you don’t, we’ll identify it on site.
We Also Service These Brands
CGI is one of fifty-plus vetted brands we specify and install. We also work with KraftMaid and Wellborn cabinets, Cambria and Silestone quartz surfaces alongside Caesarstone, Kohler and Toto fixtures, and GAF and Owens Corning roofing. That range matters when you’re remodeling a bathroom and the cabinet, countertop and fixture decisions interact – we can quote the whole scope honestly, in one written price, rather than steering you to a single brand.
FAQs – CGI Construction Service in Glendale

Yes, in most cases. Seals, sweeps and hinges are wear parts, and when the glass and frame are sound, replacing them is the right fix. Bring the series name or model number to the estimate and we’ll source the part against it; if the curb or framing behind the tile has gone soft, we’ll tell you that a seal swap won’t hold. Call (844) 320-5930 for a free estimate.
It’s usually an install problem, not a material defect. The cutout for a sink is the thinnest section of the slab, and if the cabinet run beneath it wasn’t flat, the stone flexes slightly every time someone leans on the edge. Over a few seasons that flexing opens a hairline. The honest fix is to re-set and shim the cabinets to plane, then address the crack edge – not to patch the surface and leave the substrate moving underneath.
Yes, with proper blocking. Plaster over lath doesn’t hold a cabinet screw the way drywall over studs does, so we install blocking behind the plaster at the screw line before hanging the boxes. Skipping that step is why drawer glides loosen and go out of alignment a year or two after install. Mention the wall construction at the estimate and we’ll factor it into the written scope.
A framed enclosure has a sweep and door seal that degrade first, letting water track onto the curb and into the framing behind the tile. A frameless install removes that forgiving frame, so glass clearance and curb levelness have to be right the first time – a door templated before the finished tile plane exists won’t swing true. Both are solvable with correct layout and new CGI hardware; the failure modes just live in different places.
Failing grout at the curb with tile that looks fine usually means water has been getting behind it. Efflorescence – the white bloom at the joints – is the tell. If the framing and substrate are still sound, re-sealing and re-detailing the joints is a legitimate repair. If the curb is soft, the pan and waterproofing need rebuilding, and a sealant patch will fail again within the year. We check it on site and give you the written price for both paths.
It depends on scope, but these are the ranges we quote in Glendale:
| Service | Price Range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Cabinet Installation | $4,000 – $13,000 |
Every project gets a flat written price and written scope before work starts, and no change proceeds without a signed change order. Call (844) 320-5930 for an exact quote – estimates are free.
Book Your CGI Service in Glendale, CA
Bring us your CGI model number, or let us identify it on site. You’ll get a written scope, a flat written price, and a documented photo record when the work is done – backed by the 365-Day Done Right Promise. Call Rowan Construction Group Glendale at (844) 320-5930 to schedule your free estimate.
Written by the team at Rowan Construction Group.












