







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Altadena, CA
Rowan Construction Group Glendale provides independent CGI service across Altadena: fiber-cement lap siding, trim, fascia, soffit and panel systems installed and repaired to the tolerances CGI specifies and to the wildfire detailing Los Angeles County now requires inside the Eaton Fire burn scar. The one thing that separates our CGI work here from anywhere else: every wall we touch in Altadena gets a lot-specific cladding spec, because a surviving bungalow and the empty lot next door rarely need the same assembly. We’re an independent CGI service provider, not affiliated with or authorized by the manufacturer. Call (844) 320-5930 for a written price before anything gets ordered.
Why Altadena Residents Choose Us for CGI Service

CGI’s fiber-cement products are a matched assembly, not a stack of parts. Fastener spec, trim profile, caulk joint width, ground clearance, and the finish coat all depend on each other, and when one gets substituted the cladding fails at the joints first. Our technicians have up to 19 years of experience with that assembly, and we work from CGI’s published installation instructions rather than from habit.
Altadena owners tend to research the way they buy appliances: they read the three-star reviews and want the number on the page. So we put it there. A written scope and a flat written price arrive before any material is ordered, and no change proceeds until a change order is signed. Under Clause 1 of the Haven Standard, the price is written before anyone starts. What we don’t do is claim local parts stock. Fasteners, trim, and touch-up finishes are sourced per job from CGI-distributed material so the system stays matched.
We also keep the phone answered by a live person around the clock, and every visit ends with a documented photo record of what we found and what we did. On a re-clad, those photos of the sheathing and flashing behind the old panels matter more than the invoice.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common CGI Construction Problems We Solve in Altadena
- Ember and radiant-heat damage on surviving structures. Near the burn scar, CGI lap siding often blisters, chalks, or cracks at the fasteners on the wall that faced the fire while the shaded side looks untouched. That pattern is heat exposure plus wind fatigue, not a bad batch of panels.
- Fastener corrosion and panel loosening. Santa Ana winds funnel through the canyons at the base of the San Gabriel Mountains and load the walls hard. When a rebuild was re-clad without upgrading the fastener spec, panels work loose at the studs long before the siding itself fails.
- Moisture intrusion behind CGI panels on older walls. Original Craftsman and mid-century sheathing and flashing were left in place during plenty of re-clads around Altadena. The new panels shed water; the wall behind them traps it.
- Improper ground clearance and caulk joints. Installations detailed to the old standard rather than to Zone 0 ember-resistant requirements leave a gap at the base of the wall where embers collect. That’s a detailing failure, and it’s fixable without re-cladding the whole elevation.
- Mixed-assembly repairs. Aftermarket trim and generic fasteners on a CGI wall create a different corrosion and expansion profile than the rest of the system. We patch with matching CGI product or replace the affected courses entirely.
CGI Service in Altadena: What Local Conditions Mean for Your Equipment
Here’s the fact that shapes every CGI job in Altadena: the Eaton Fire didn’t take whole neighborhoods, it took blocks in a patchwork, so a standing 1920s bungalow in the 91001 flats can share a property line with a bare lot headed for a full rebuild. Those two walls get specified differently. The bungalow may need only trim, flashing, and fastener repair on one elevation. The lot next door is new fire-rated sheathing under Zone 0 rules, with CGI panels set to the clearance and ember detailing the county now reviews. Charcoal-laden soil and heat-cracked slabs complicate the second job, not the first. No generic CGI page can tell you which one you have. A walk of the wall with the installation instructions in hand can, and that’s where every Altadena estimate we write begins.
CGI Models & Products We Service in Altadena
We work across the CGI fiber-cement line: WeatherSide lap siding, fiber-cement trim and fascia boards, and soffit and panel products. On any of them, the repair-or-replace decision follows the material. A wall that only needs localized repair gets patched with matching CGI product rather than torn off; a panel that has lost its fiber-cement integrity to heat gets replaced, full stop. Fasteners, trim, and touch-up finishes come from CGI-distributed supply so the cladding behaves as one assembly, and we don’t substitute aftermarket equivalents on a wall we’re also guaranteeing.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Altadena

Cladding work almost never travels alone in Altadena. A burn-scar re-clad commonly pairs with a roof, and a surviving interior often pairs with a kitchen rebuild. Here’s where those numbers land:
| Service | Price Range |
|---|---|
| Roof Replacement | $8,000 – $20,000 |
| Roof Repair | $400 – $1,800 |
| Full Kitchen Remodeling | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
What moves a CGI estimate: how many courses need replacement, whether the sheathing and flashing behind them are sound, fastener spec upgrades for wind loading, and how much of the elevation has to meet Zone 0 detailing. A free estimate includes a wall-by-wall condition report with photos, a written scope, and a flat price. Call (844) 320-5930 for an exact quote.
Serving Altadena, CA – Our Local Coverage Area
We serve Altadena and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Altadena
Is CGI fiber-cement siding a good choice for an Altadena rebuild under the county’s Zone 0 ember rules? Yes. CGI’s fiber-cement products are non-combustible, which is why the category fits Zone 0’s ember-resistant zone, but the material alone doesn’t satisfy the rule. The detailing does: ground clearance, joint sealing, and ember-resistant flashing at the base of the wall. We specify all three on every Altadena rebuild and write them into the scope.
My Altadena house survived the Eaton Fire but the CGI siding on one wall is blistered – do I have to re-clad the whole house? Usually not. Blistering on the fire-facing wall with intact siding elsewhere points to localized heat damage, and the standard approach is to pull the damaged courses, check the sheathing and flashing behind them, and re-clad with matching CGI product. A panel that has lost its fiber-cement integrity gets replaced; sound material stays. Call (844) 320-5930 and we’ll walk the elevations with you.
Does charcoal-laden soil or a heat-cracked slab affect a CGI re-clad or kitchen rebuild in Altadena? It can. A slab cracked by the fire’s heat changes how the wall base and any new sill plate get anchored, and charcoal-laden soil has to be addressed before footings or hardscape go back in. Neither shows up on a visual walk of the siding, which is why we check the base of the wall and the grade before quoting. Estimates are free.
How does Santa Ana wind exposure at the San Gabriel foothills affect CGI siding installation? Wind loading at the foothills drives the fastener schedule. We spec corrosion-resistant fasteners at CGI’s published spacing for the exposure, and on homes that were re-clad after the fire without a fastener upgrade, loosened panels at the studs are one of the most common things we find. Call (844) 320-5930 for a written price on the correction.
Can CGI cladding work be coordinated with a kitchen or bathroom remodel in an Altadena home? Yes, and it usually should be. If the kitchen wall is coming open anyway, the flashing and sheathing check happens once instead of twice. We sequence the trades under one written scope and one flat price, with photo records at each stage. Call (844) 320-5930 to schedule an estimate.
Service Areas Near Altadena
CGI cladding and rebuild work runs out of our Glendale base into the surrounding foothill communities. Alongside our Altadena service area, we work in Pasadena, La Cañada Flintridge, La Crescenta-Montrose, and South Pasadena. Foothill wind exposure and wildfire detailing follow the same rules across all of them, which is why the same CGI service scope carries over.
Book Your CGI Service in Altadena Today
Every Altadena CGI job starts the same way: a written price, a written scope, and a walk of the wall before anyone orders a panel. Storm and emergency damage calls get triaged first, and a live person answers around the clock. Call (844) 320-5930 to schedule your free estimate, or bring a competitor’s quote for a free line-by-line second opinion.
Written by the team at Rowan Construction Group Glendale.












