







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterBacksplash, Tile & Flooring in Glendale, CA
A backsplash, tile, or flooring job in Glendale typically runs $1,400 to $9,500 depending on square footage, material, and how much substrate repair the room needs underneath. We quote a flat written price before anyone starts, so you’re comparing a real number rather than a phone-call guess. Rowan Construction Group Glendale handles these jobs as part of a Kitchen Remodeling scope or as a standalone replacement, and every crew member arrives background-checked, uniformed, and with a documented photo record as a standard deliverable.
Tile is where a contractor’s work is most visible and where shortcuts show up fastest. A slab floor laid without checking the subfloor flexes and cracks within a season. A backsplash set with the wrong thinset releases at the edge of a range hood. Our technicians have up to 19 years of experience in exactly this work, and under Clause 1 of The Haven Standard the flat price is written and signed off before a single tile is set. Call (844) 320-5930 for a free estimate.

When You Need Backsplash, Tile & Flooring
Most of the calls we take in Glendale fall into one of these real scenarios. If yours reads like one of them, it’s likely a job we quote the same week.
- Cracked or hollow kitchen floor tile. In older Glendale homes near the Brand Park side, we regularly find ceramic tile set directly over a wood subfloor with no uncoupling membrane, so seasonal movement cracks the grout lines and the edges start popping loose. That’s a substrate problem, not a tile problem.
- A dated backsplash from a prior remodel. Four-inch builder-grade tile along a countertop, or a glass mosaic from a 2012 flip, reads as tired against new cabinets or countertops. This is a two-to-four-day job when the substrate is sound.
- Grout that won’t come clean. Porous cement grout in a busy family kitchen stains permanently once it’s been sealed badly or not at all. Regrouting or a full re-tile is the honest answer.
- Uneven or springy floors. If a marble tile is cracking in the same spot year after year, the floor is deflecting. We check flatness and deflection before we ever quote the finish material.
- Water damage near the sink or dishwasher. Wicking grout and stained backsplash at the base of a faucet often means a slow leak behind the counter. We flag that in the photo record so it’s handled before tile goes back over it.
- Matching the kitchen to the rest of the house. Homeowners who bought a high-priced Glendale property in recent years often want the floors and backsplash to match a new countertop in Cambria or Silestone, and that coordination is where we spend the most planning time.
Our Backsplash, Tile & Flooring Process
We do this the same way on every job, from a 30-square-foot backsplash to a full kitchen floor tear-out.
- Walk the room and inspect what’s underneath. We check subfloor flatness, deflection, existing tile bond, and moisture near the sink and dishwasher. You get a photo record of what we find, described in plain terms: the condition of the substrate, not an opinion about it.
- Write the flat price and the written scope. Every line is priced: demolition, substrate prep, setting material, tile, grout, trim, and the warranty. This is the no-hassle upfront pricing that Clause 1 of The Haven Standard exists to enforce. No work begins until you’ve signed off on the number.
- Order and stage the material. We work across fifty-plus vetted brands, and you’ll choose from the ones that fit the scope. Wellborn and Cambria both come up often for kitchens where the backsplash is being matched to cabinetry and a countertop. Tile is staged on site before the tear-out so there’s no mid-job stall.
- Prepare the substrate properly, then set the tile. Uncoupled membrane on floors, proper backer and thinset on walls. We use the trade’s real materials, not a shortcut. If demolition reveals rot or a cracked slab, the change is written into a change order and signed before we proceed – no surprise invoice at the end.
- Grout, seal, and detail the edges. Consistent grout joints, clean transitions at the countertop and cabinets, and a seal coat so the finish holds up in a Glendale kitchen where summers push past 100 degrees and the indoor-outdoor traffic is heavy.
- Walk the job and hand over the record. You get the photo record of what was found, what was replaced, and what was installed, plus the written warranty. Under the 365-Day Done Right Promise, if it’s not right, we make it right.

Backsplash, Tile & Flooring Pricing in Glendale
Here’s what these jobs typically cost in the Glendale market. Ranges below are what we quote in writing; the exact flat price depends on square footage, material tier, and how much substrate prep the room needs.
| Scope | Typical range | What drives the number |
|---|---|---|
| Kitchen backsplash – ceramic or porcelain | $1,400 – $2,900 | Linear footage, wall flatness, removal of old tile |
| Kitchen backsplash – glass or stone mosaic | $2,200 – $4,200 | Material tier, detail cuts at outlets and range |
| Kitchen floor tile – porcelain or ceramic | $2,800 – $6,500 | Square footage, membrane, subfloor repair |
| Kitchen floor tile – natural stone | $4,500 – $9,500 | Stone tier, deflection correction, sealing |
| Grout repair or regrouting (backsplash) | $400 – $1,100 | Linear footage, whether re-sealing is included |
| Substrate or subfloor repair (per area) | $350 – $1,800 | What demolition reveals; priced as a signed change order |
What moves the number most: whether the old tile comes up cleanly, whether the subfloor needs flattening or deflection correction, and the tier of tile you choose. Natural stone costs more than porcelain in both material and labor. A small mosaic backsplash costs less than a large-format floor because there’s less square footage, but it has more detail cuts per foot around outlets, range hoods, and window trim. Every one of these is quoted as a flat written price with a written scope, so the number on the page is the number on the invoice.
Free second opinion on any written estimate: if you’ve got a competitor’s quote, we’ll review it line by line at no charge and tell you what we’d charge for the same scope. No change proceeds on a change order that isn’t signed – that discipline is why our projects finish within a few percent of the agreed cost.
FAQs – Backsplash, Tile & Flooring
How much does a kitchen backsplash cost in Glendale?
A kitchen backsplash in Glendale typically costs $1,400 to $2,900 for ceramic or porcelain and $2,200 to $4,200 for glass or stone mosaic, including removal of the old tile and substrate prep when it’s sound. The variance comes from linear footage and detail work at outlets and range hoods. Call (844) 320-5930 for an exact flat quote – estimates are free.
How long does a tile backsplash or floor take?
A backsplash usually takes two to four days and a kitchen floor typically takes four to seven days, from tear-out through grout cure and final seal. Larger rooms and substrate repair push the number up. We give you the timeline in writing with the price.
Is it cheaper to repair or replace the tile?
For a single cracked tile or a few failed grout lines, a targeted repair at $400 to $1,100 is usually the better spend. For widespread hollow tile, continuous cracking, or substrate failure, full replacement costs less over a few years because repair is money spent twice. We tell you which side of that line your floor sits on before you commit to a price.
What brands do you source for tile and countertop coordination?
We source across fifty-plus vetted brands, and for a kitchen where the backsplash has to sit against new cabinetry and countertops, we regularly work with Wellborn cabinets, Cambria and Silestone quartz, and Caesarstone. We’ll match the tile tone to the slab in person before it’s ordered.
Can you come out this week for an estimate?
Yes. We quote current Glendale jobs the same week in most cases, and a live person answers calls 24/7. Call (844) 320-5930 for a free estimate – you’ll get the written flat price, not a phone promise.
Getting the Number in Writing
Tile and flooring work in Glendale doesn’t require a hard sell, it requires a careful read of what’s under the surface. That’s where we start: inspect the substrate, name the condition in plain terms, write the price, and sign the scope. The 365-Day Done Right Promise stands behind it, the photo record on every visit documents it, and the written warranty travels with the job. Call Rowan Construction Group Glendale at (844) 320-5930 for a free estimate, or reach us about the larger kitchen scope through our home page.
Written by the team at Rowan Construction Group Glendale, serving Glendale.


