







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Bathroom Remodeling: The Glendale Owner’s Guide
Tremron bathroom remodeling in Glendale typically runs $9,000 to $28,000 for a full bath and $5,000 to $12,000 for a small one, quoted as a flat written price before any work starts. Tremron is a Florida-based hardscape maker whose pavers and wall systems are common around Glendale patios and pool decks, so most homeowners asking about “Tremron bathroom remodeling” are really asking about the outdoor hardscape that touches the bath addition, the step-down shower surround, or the paver-to-tile transition at a sliding door. Owners usually discover the problem the same way: water pooling at the threshold after a shower, a hollow sound underfoot near the shower curb, or efflorescence – the chalky white salt bloom that shows up on the surface of hardscape and tile – creeping up an exterior wall. In Glendale, that discovery often comes after the first real rain of the season, not during it.
Key Takeaways
- A full Tremron-compatible bathroom remodel in Glendale lands in the $9,000 to $28,000 band; small baths run $5,000 to $12,000.
- Before quoting, we identify which Tremron line you have – labels, boxes, or measured dimensions – because the wrong paver or cap does not seat on the wrong base.
- Rowan Construction Group Glendale is an independent contractor and is not affiliated with Tremron.
- Call (844) 320-5930 for a free estimate and a written scope with a photo record of what we found.
Which Tremron Models This Applies To
Tremron manufactures in Florida and ships nationally, so the tile-and-paver product you find on a Glendale property is almost always from one of a handful of lines: Olde Towne, Stonegate, Kingston, or Sierra for pavement, and Mega Olde Towne for wall and step units. Each line has its own nominal thickness – the standard paver is about 2 3/8 inches, but Kingston runs a full 2 3/4, which matters the moment you try to match an existing field. The identification step is not romantic: we measure the actual thickness with a caliper, photograph any stamps or lot markings on the box, and match the color name (Sierra’s “Sierra” line is not the same as Stonegate’s “Sierra” finish). The OEM-versus-aftermarket call comes next. Tremron does not sell finish-matched trim to the retail market in Glendale, so a genuine replacement often means a special order through a distributor with a three-to-five-week lead, while a quality domestic aftermarket paver in a near-match can be laid the same week. We quote both, in writing, and let you choose based on budget and how visible the area is.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tremron Bathroom Remodeling Is Failing
The parts that fail on a Tremron-finished bathroom almost always fail at the seam where hardscape, tile, and water meet. These are the five we see most often in Glendale.
- Water pooling at the shower curb or threshold. Tremron pavers and tile are set on a base that is not sloped to an outlet, and standing water finds the lowest point. The underlying cause is usually a missing or reversed fall, not the paver itself.
- Hollow sound when you tap the field. A hollow note means the thin-set or mortar bed has debonded from the substrate – a bonded-mortar failure that shows up fastest in older Glendale homes where the subfloor is wood rather than concrete slab.
- Efflorescence – white chalky powder on the surface. Water is moving through the assembly and carrying salts to the face. On a Tremron paver or tile this is a moisture problem behind the surface, not a stain to scrub off.
- Cracked grout joints or a lifted paver edge at the transition. The crack is where two materials meet and one of them has moved. On a paver-to-tile transition, that is almost always the base, not the tile.
- Loose or wobbly fixtures or a rocking step. When a Tremron step or cap is not set on a fully compacted base, the paver rocks, and that movement travels into the fixture or wall above it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Replacement pricing in Glendale comes down to what is actually being replaced. A paver edge or step cap in the $3,000 to $8,500 band usually covers removal, base repair, and reset with a mortar bed you can inspect. A full shower surround or field replacement with a new waterproofing membrane lands in the $4,500 to $12,000 range. A whole bathroom done correctly runs $9,000 to $28,000, and a small bath in the $5,000 to $12,000 band. The range is driven by the thickness of the base being rebuilt, the tub-to-shower conversion question (which is a different scope) in $3,500 to $10,000, and whether the existing subfloor is concrete or wood. Our quote is a flat written price with a written scope and a written warranty, and nothing moves until a change order is signed. That is the discipline that keeps projects within a few percent of the agreed cost. Every visit includes a documented photo record of what we found and what we did.
DIY or Call Us?
You can safely check the paver or tile field for hollow sound with a tap test, measure the thickness of an exposed edge, and photograph any box or lot markings to identify the line. That is where the safe work ends. Anything that involves lifting a set paver from a shower or step base, prying tile from a substrate, or re-setting a surface that carries water has a real failure mode: you cannot confirm what is under it until you open it, and opening it wrong makes a small repair a full rebuild. On a step or curb, a lifted paver is a fall hazard, and on a shower base, a bad base means water in the wall cavity within a season. Call (844) 320-5930 and we will bring a moisture meter, a tap test, and a camera. If you have a written estimate from another contractor, we will review it line by line at no charge – the Free Second Opinion is a standing offer. We also service KraftMaid, Cambria, and Silestone finishes on the same jobs.
FAQs

A properly set Tremron paver or tile field is a 20-to-30-year surface in Southern California, but the base – not the paver – is what fails first. Glendale’s long dry season and winter rain cycle push the base harder than most of the country, so plan on re-sealing at the seam every few years. Call (844) 320-5930 for a written lifespan assessment on your specific assembly.
Sometimes. A single debonded paver or a small grout crack can often be reset or re-grouted without a field replacement, and we price that separately before quoting a larger job. If the base is wet or hollow across more than a small area, the repair is a rebuild, and we will show you the moisture reading that tells us which. Call (844) 320-5930 for the free estimate.
A single paver or step cap reset is usually a one-day job. A shower surround or field replacement in Glendale is typically two to four days including base repair and cure time, depending on whether the substrate is wood or concrete. We write the schedule into the flat price quote. Call (844) 320-5930 to get yours.
We identify the line by thickness, stamp, and box labeling, then quote both a genuine special order and a quality domestic aftermarket near-match so you can compare. Rowan Construction Group Glendale is an independent contractor, not affiliated with Tremron, so we source both paths honestly and put the numbers in writing. Call (844) 320-5930 for a free estimate.
Written by the team at Rowan Construction Group Glendale, serving Glendale and nearby areas.












