







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Roofing: The Glendale Owner’s Guide
We install and repair roofing assemblies on Glendale homes that include Therma-Tru door and entry components, with typical roofing work running $400 – $1,800 for repairs and $8,000 – $20,000 for a full replacement depending on pitch, square footage, and material. Rowan Construction Group Glendale is an independent service provider and is not affiliated with Therma-Tru. Most Glendale owners don’t go looking for this page until a leak shows up at the threshold of a Therma-Tru entry door, or until they notice the flashing collar around a door surround has pulled away and stained the stucco below it.
Roofing and entry systems meet at one of the hardest junctions in a house: the door head and its flashing. When that junction fails, the water shows up indoors, at the door sill, or on the ceiling of the room closest to the entry, and it usually shows up months after the actual breach began.
Key Takeaways
- Therma-Tru entry doors are rated for weather exposure but rely on the roof flashing above them to keep water out.
- Glendale’s dry summers followed by winter rain events expose failed flashings faster than steady-climate markets.
- Repairs typically fall in the $400 – $1,800 range; full roof replacement, $8,000 – $20,000 depending on scope.
- We write the price before any work starts, under Clause 1 of the Haven Standard.
Which Therma-Tru Models This Applies To

Therma-Tru entry door systems and their surrounding roof assemblies are what this page covers. That means the Fiber-Classic and Smooth-Star lines, the American Style collection, and the door and sidelight configurations that show up on Glendale’s 1920s bungalows, mid-century ranches, and newer infill builds. The door manufacturer doesn’t require a specific roof part to go with it. What matters is the flashing, the head casing, and the projection of the roof or awning above the door, and those are determined by the house, not the door label.
To identify what you have, look for the Therma-Tru label on the door edge or jamb, which lists the series and the door slab size (typically 36″ x 80″ for a standard entry). Then measure the roof overhang or awning above the door and note the pitch. That’s the number that determines which flashing and drip edge profile will work.
The OEM-versus-aftermarket decision on the roofing side is straightforward: flashing and drip edge are commodity parts, and a quality aftermarket flashing from a recognized manufacturer performs the same job as a proprietary one. We don’t sell parts or stock them on a truck. We source the right spec for the job and install it. Cross-reference with our other brand work, including KraftMaid, Cambria, and Silestone, is available on request.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Therma-Tru Roofing Is Failing
Most Glendale owners describe the same handful of symptoms. Each points to a specific failure inside the assembly.
- Water staining at the door head or on the interior jamb. The flashing above the door has separated, cracked, or been installed without proper overlap. Water tracks down the door head and shows up where the casing meets the wall.
- Peeling paint or bubbling stucco on the wall above the door. Moisture is trapped behind the finish because the drip edge isn’t shedding water clear of the wall. This is the most common early sign in Glendale’s older stucco homes.
- Visible gaps or lifted flashing where the roof meets the door surround. Sealant has aged out, typically after seven to ten years of sun exposure, and the flashing is no longer watertight at the transition.
- Daylight visible from inside around the door frame or above it. Either the door frame has shifted or the roof structure above has settled, and the opening has lost its seal.
- Granule loss or curling on the shingles directly above the door. That section takes more concentrated sun and runoff than the rest of the roof, and it fails first. A localized repair is often enough; if the shingles are curling across the whole slope, the slope is at the end of its life.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here are the Glendale installed ranges we quote, with labor, materials, and disposal included.
| Scope | Installed Range |
|---|---|
| Roof repair (flashing, localized shingle, drip edge) | $400 – $1,800 |
| Tile roof repair | $600 – $2,500 |
| Roof replacement (asphalt, architectural shingle) | $8,000 – $20,000 |
| Metal roof installation | $15,000 – $40,000 |
What moves the number: roof pitch and access, the square footage of the affected area, whether the decking underneath is sound or needs replacement, the layer count if old roofing comes off, and the material you choose. We deliver a written line-item quote before work starts, and no change proceeds without a signed change order. The work is covered by the 365-Day Done Right Promise, backed by The Haven Standard.
DIY or Call Us?
Some checks are safe and worth doing. From the ground with binoculars, you can spot lifted flashing, missing shingle tabs above the door, or a drip edge that’s pulling away. Indoors, check for fresh water stains on the door head after a rain. Those are observations, not repairs.
What we don’t recommend: getting on a roof above a door on a ladder to reseal flashing or replace a shingle. Glendale roofs are often steep, and the area above an entry door is directly over a hard landing. Fall risk on a steep single-story roof is the same as on a two-story. Flashing repair also requires understanding how the layers overlap, and resealing without correcting the underlying layering traps water and makes the next leak worse. Call us at (844) 320-5930. The estimate is free, and we’ll show you a photo record of what we find before anyone touches a shingle.
FAQs

Standard asphalt flashing and sealant last roughly 7 – 12 years in Glendale’s climate, shorter on south-facing slopes that see concentrated sun. Tile and metal systems run considerably longer. Call (844) 320-5930 for an exact quote; estimates are free.
Often, yes. If the shingles above the door are still sound and the failure is limited to the flashing transition, a localized repair in the $400 – $1,800 range resolves it. If the shingles are curling across the slope, a repair is a short-term patch and we’ll tell you so.
Localized flashing and drip edge repair is typically a half-day to a full day. A full roof replacement on a typical Glendale home runs two to four days depending on size, pitch, and weather. Call for a written scope with a schedule.
We match the flashing and drip edge to the specific roof and door projection on your house, not to a generic spec. Because we’re not affiliated with Therma-Tru, we source what fits the assembly rather than what carries the label, and we show you the spec and the photo record on the visit. Call (844) 320-5930 to schedule your free estimate, or bring a written estimate from another contractor for a free second opinion.
Written by the team at Rowan Construction Group Glendale, serving Glendale and nearby areas.












