







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Techo-Bloc Driveway & Pavers: The Glendale Owner’s Guide
We install and repair Techo-Bloc driveway and paver systems across Glendale, and a full paver driveway typically runs $7,000 – $18,000 installed, while a paver patio runs $3,500 – $11,000. Most Glendale homeowners find us after the surface has started to tell on itself: a few units rocking underfoot at the driveway apron, sand washing out between joints after the first hard rain of the season, or hairline cracks in the border course where the base didn’t get compacted. If the paver field still locks together and the failure is localized, a measured repair usually beats a tear-out. Call (844) 320-5930 for a free estimate and we’ll write the number down before anything moves.
Which Techo-Bloc Models This Applies To

Techo-Bloc makes a wide catalog of concrete pavers, and each one fails in its own way. The products Glendale homeowners most often call us about are the HD2 and Blu 60 lines for driveways, the Borealis and Industria lines for modern slab looks, the Travertine and Raffinato lines for patio and pool deck, and the Mini Creta and Semma for borders and accents. The HD2 and Blu 60 are the two that see real vehicle loads, and both are built with a dense face and a narrower chamfer than a standard 60mm paver, which is the spec that lets them hold a tight joint line when the base is done right. If a unit cracks or a corner spalls, the first job is identifying the exact line and face profile, because a Borealis slab inside an Industria field will show an obvious texture seam. Check the original project paperwork for the series name, or pull one loose unit from the perimeter and match the size, thickness and surface texture against the current Techo-Bloc catalog.
On OEM versus equivalent: the manufacturer’s own replacement units are the cleanest match, full stop, and for a visible driveway apron or a sidewalk facing the street that’s what you want. Where a supply lead time is long or a discontinued color is no longer produced, a quality equivalent in matching thickness and compressive strength is a reasonable substitute on a less-visible area like a side yard or a back patio edge, provided the base is re-prepared to the same depth. We don’t keep parts on a truck or in local stock; units are ordered to the job, which is why accuracy at the measurement stage matters. We’re an independent service provider and not affiliated with Techo-Bloc.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Techo-Bloc Driveway & Pavers Is Failing
- Rocking or loose units at the apron. Wheel loads and turning torque at the driveway mouth are the hardest stress a paver field takes, and when the sand bedding under a unit thins out, individual pavers lift and rock.
- Sand washing out of the joints after rain. Missing joint sand is often the first sign the edge restraint has let go, which lets the field spread outward under traffic.
- Sunken pockets over a utility trench. A low trench line backfilled and compacted to a softer standard than the surrounding subgrade will show up as a trough across the driveway within a couple of seasons.
- Joint lines opening up toward the street. A spreading field usually points to a missing or failed edge restraint on the downhill side; pavers rely on a locked perimeter to hold the pattern tight.
- Spalling or corner cracks on the surface. If the base is sound but individual units are spalling at the corner, that’s a material or a freeze-cycle issue, and in Glendale the more common culprit is a base that wasn’t fully compacted before bedding.
Glendale’s climate is easier on pavers than a frost-belt city, but a hot inland summer plus winter rain on a compacted base is a real test cycle: the pavers expand slightly in the heat, contract when it cools, and if the joint sand is gone, that movement has nowhere to go and shows up as cracking at the border course. In the Verdugo-adjacent foothill neighborhoods, we regularly see spring settling over downslope fill, which is a base-drainage issue more than a paver issue. On flatter lots closer to the 134 and 2 freeways, we more often see edge-restraint failures at the apron, because that’s where turning traffic pushes the field outward.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

In Glendale, a Techo-Bloc paver driveway install runs $7,000 – $18,000, a paver patio runs $3,500 – $11,000, and a full driveway replacement including base re-prep is $5,000 – $14,000. Here’s what makes up the range:
| Item | Typical Glendale range |
|---|---|
| Paver driveway installation (Techo-Bloc HD2 / Blu 60) | $7,000 – $18,000 |
| Paver patio installation | $3,500 – $11,000 |
| Driveway replacement (base + field + restraint) | $5,000 – $14,000 |
| Driveway sealing | $250 – $700 |
| Concrete driveway (comparison) | $4,500 – $12,000 |
The high end covers a full tear-out with new compacted base, new edge restraint, more color-blending of Techo-Bloc units, and a larger square footage. The low end is a repair to a well-drained base. Under Clause 1 of the Haven Standard, you get a written price before any work starts, and no change proceeds without a signed change order. The work is covered by our 365-Day Done Right Promise: if it’s not done right, we make it right.
DIY or Call Us?
You can safely inspect the field by walking it and looking for rocking units, lift a single loose border paver to see whether the sand bedding is intact, and check the edge restraint visually at the perimeter. Doing the repair yourself is a different matter: on a driveway, the base compaction is the whole game, and a DIY patch over an under-compacted base will re-settle within a season. Compaction equipment and a vibrating plate at the right depth is the difference, and it’s not a small-risk job to get wrong when vehicles are parked on the surface.
What actually fails most often in Glendale is the base or the edge restraint, not the Techo-Bloc unit itself, and diagnosing which one takes a trained eye on site. Call (844) 320-5930 and we’ll walk it with you, photograph what we find, and give you a written price with the options laid out.
FAQs

How long does a Techo-Bloc paver driveway last in Glendale? With a properly compacted base, edge restraint and joint sand topped up, a Techo-Bloc driver-grade paver field typically holds fifteen to twenty-five years before a full rebuild, and the pavers themselves outlast the base and the joint sand. Call (844) 320-5930 for a free evaluation if you’re not sure where your field is in that arc.
Can a failed paver be repaired instead of replaced? Yes, in most cases, and it’s the cheapest fix when the failure is local. A single cracked unit, a sunken corner, or an edge restraint that’s let go can be lifted, re-bedded and re-sanded without touching the rest of the field. Call (844) 320-5930 and we’ll tell you whether the repair will actually hold.
How long does a Techo-Bloc paver repair take? A single-unit or small-area repair is usually a few hours on site, while a full driveway tear-out and re-lay is a multi-day job that depends on base prep and cure. Ask for the timeline in the written estimate, and we’ll give you the number before any work starts.
How do you source the Techo-Bloc units, and do you keep them in stock? We don’t stock parts or carry them on trucks. The right units are ordered to the job after we confirm the exact series, thickness and color profile from the existing field or the original paperwork, which is why the identification step comes first. Call (844) 320-5930 to get that sorted before any part is ordered.
You don’t need to guess which Techo-Bloc line you’re standing on or how much a repair should cost. Call (844) 320-5930 for a free estimate: we’ll walk the field, name what we found in plain terms, and hand you a written price with the options in front of you. We also service KraftMaid, Cambria and Silestone on the remodel side, so a driveway call today can turn into an honest number on a kitchen tomorrow.
Written by the team at Rowan Construction Group Glendale, serving Glendale and nearby areas.












