







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tamko Driveway & Pavers: The Glendale Owner’s Guide
If you have Tamko paving or a Tamko-surfaced driveway element that’s failing, we replace and re-lay these systems across Glendale, and the installed cost usually lands between $7,000 and $18,000 for a full paver driveway, or $3,500 to $11,000 for a paver patio. We’re an independent contractor, not affiliated with Tamko, and we quote a flat written price before any work starts. Most owners find the problem the same way: a paver edge lifts after a wet winter, a joint line sags where the base settled, or a piece of the surface cracks along a joint and never recovers. In Glendale, that phone call usually comes in February or March after the rains.
Which Tamko Models This Applies To
Tamko’s driveway and hardscape line runs through their paver and hardscape products, and the model compatibility question almost always comes down to three things: the paver profile (the dimensional footprint), the surface finish, and the base material spec the system was laid on. We match by profile dimensions first, then by finish color and texture. The label matters here – Tamko stamps or prints product identification on bundles and pallets, and the original install documentation often names the spec in square feet and color code. If the documentation is gone, we measure the paver’s length, width, and thickness at the field and compare against current Tamko spec sheets before ordering anything. On the OEM-versus-aftermarket decision: a quality aftermarket paver in the correct profile can be functionally sound, but the color and texture match to your existing run is where it gets dicey – a shade off, and the repair reads as a patch, not a repair. We carry Belgard and Techo-Bloc in the sourcing mix alongside the Tamko lines, along with KraftMaid, Cambria, and Silestone for kitchen and counter work, but on a paver match we order to your existing spec, not by convenience.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tamko Driveway & Pavers Is Failing
These are the symptoms we see most often in Glendale, and what’s usually underneath them:
- Lifting or rocking pavers near the edge. Usually base failure – the compacted aggregate layer under the pavers has settled or washed. In Glendale, that often traces to drainage running toward the driveway instead of away from it, which is common on sloped lots in the hillside neighborhoods.
- Joint sand washing out after rain. The polymeric or plain sand in the joints has eroded, either from age or from improper initial installation. If it keeps happening in the same spot, water is moving through there.
- Surface cracking or spalling along a paver. Hairline cracks can be cosmetic, but a crack that opens along a joint or a paver that’s chipping at the corner usually signals a point load or a base void below.
- Color fading or efflorescence (the white chalky film). This is a surface condition, not a structural failure, but it can be corrected with a cleaning and re-sealing. In Glendale’s dry, sunny climate, UV exposure is hard on unstabilized colorants.
- Uneven settling or a low spot that holds water. This is the one to take seriously. Pools of water after a rain mean the pitch is wrong, and water under the pavers erodes the base over time.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s how the numbers break down for Glendale, installed, including labor and materials:
- Paver driveway installation: $7,000 – $18,000
- Paver patio installation: $3,500 – $11,000
- Concrete driveway installation: $4,500 – $12,000
- Driveway replacement (demolition and re-lay): $5,000 – $14,000
- Driveway sealing (when the pavers are sound and only the surface needs work): $250 – $700
What drives the range: total square footage, the condition of the base (if it has to be excavated and re-compacted, that’s the largest cost variable), the paver profile and finish, and accessibility for equipment. The quote is flat and written with a written scope – no surprise line items once we open the ground. The work carries our 365-Day Done Right Promise, and every visit includes a photo record of the substrate and the finished install, so you have proof of what was found and what was laid.
DIY or Call Us?
There are two safe things a homeowner can do: inspect the surface for cracks, lifting, and drainage pooling, and clear debris from the joints and edges. What goes wrong when an owner tries to fix it themselves: re-sanding a joint that’s washing out doesn’t address the water running under the base, and pulling up a lifted paver often reveals a compacted layer that’s already failed – a re-set without fixing the base is temporary at best. Compaction of a driveway base is a machine job with a plate compactor and proper moisture control; hand-tamping a patch is the single most common reason a repair fails within a season. This is not a spring or high-voltage component, but it is heavy work and the failure point is underground, which is why the base check comes before any re-lay. If your driveway is pooling, lifting, or cracking, call (844) 320-5930 and we’ll come look and give you a written price.
FAQs

A properly installed Tamko paver system should last 25 to 30 years or more in Glendale’s climate, where the main stressors are UV exposure in summer and concentrated rain in winter. The pavers themselves usually outlast the base and joint sand, which is why base prep and drainage are the real lifespan drivers. Call (844) 320-5930 for a look at your specific install.
Yes, in many cases – if the failure is isolated to a section and the base below is sound, we can lift, re-set, and re-sand that section without replacing the whole run. If the base has failed across a large area or the pitch is wrong, a spot repair will fail again, and a full re-lay is the honest answer. We’ll tell you which one applies after we’ve seen it.
A spot repair is typically a day; a full driveway replacement usually runs three to five days depending on square footage and how much base prep is needed. We give you the schedule in the written quote, not a verbal estimate, and the photo record shows the progress. Call (844) 320-5930 to schedule a free estimate.
We order to your existing Tamko spec – profile dimensions, finish, and color – measured at your driveway, and we compare against current Tamko product data before ordering, so you get the right paver, not a near-match. We source across our vetted brand network and deliver a written price with the spec named before work starts. Call (844) 320-5930 for a free second opinion on any written estimate you already have.
Written by the team at Rowan Construction Group Glendale, serving Glendale and nearby areas.












