A Rowan company - serving Glendale, CA
A remodeled primary bathroom with a soaking tub and a walk-in shower
Tamko · Glendale

Tamko Bathroom Remodeling in Glendale, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Glendale
A remodeled hall bathroom with subway tile and a floating vanity
A remodeled hall bathroom with patterned floor tile and painted walls
A wood double vanity with two mirrors after a bathroom remodel
A new white vinyl privacy fence with a double gate
New painted shaker cabinets with an organized deep drawer
A remodeled kitchen with a waterfall island and wood cabinets
A finished backyard cottage with a small covered porch
A new roof with clean valleys and new flashing
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Tamko Bathroom Remodeling: The Glendale Owner’s Guide

Bathroom remodeling that involves Tamko products in Glendale typically runs $9,000 to $28,000 installed, depending on whether you’re reworking a full bath or a smaller footprint, and we quote the flat written price before any work starts. We install and repair around Tamko materials as an independent contractor, not affiliated with the manufacturer. Most Glendale owners discover a failing component the same way: a discolored patch at the base of a shower wall, a tile that flexes underfoot, or a gasket that lets a thin line of water past the shower pan after every use.

Call (844) 320-5930

Which Tamko Models This Applies To

Tamko’s footprint in a bathroom is narrower than its roofing line, and that matters for compatibility. Their waterproofing membranes, underlayments, and moisture barriers are specified by roll width, thickness in mils, and application (shower pan, wall, or floor), not by a single model number the way a faucet cartridge would be. The label on the roll and the printed spec sheet are your source of truth – not the color of the packaging, which has changed more than once. When you call, have the printed product code, the roll width you measured, and the substrate it’s bonded to (cement board, plywood, or existing tile) ready. If a Tamko roll isn’t available in the exact spec, we’ll show you a quality aftermarket equivalent side by side, with the spec sheet for each, and let you decide. We don’t claim to stock Tamko parts or carry them on a truck; any part is sourced to the job. For the fixtures and finish side, we work across KraftMaid, Cambria, and Silestone as well.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Tamko Bathroom Remodeling Is Failing

  • Soft or spongy floor near the shower pan. Water is getting past the membrane seam, usually because the overlap was run the wrong direction and gravity carries moisture into the joint instead of away from it.
  • Discoloration at the base of tile or wall panels. This is moisture trapped behind the barrier, which in Glendale’s warm inland summers often shows up faster than owners expect because the wall assembly stays warm and humid inside.
  • Lifting or bubbling membrane edges. Adhesive failure, common where the substrate wasn’t primed or was dusty when the roll went down.
  • Musty smell that returns after cleaning. The barrier is compromised and the cavity behind it is holding moisture. Cleaning the surface won’t fix it.
  • Cracked or delaminated underlayment under tile. Movement in the subfloor has broken the bond, and the tile above it will fail next.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

In Glendale, a bathroom remodel in the $9,000 to $28,000 range reflects the materials chosen, the square footage, and how much of the existing assembly has to come out. A smaller bath or a targeted replacement at the waterproofing layer sits nearer the bottom of that band; a full re-tile with new membrane and fixtures sits nearer the top. The written quote is line-item, split between materials and labor, so you can see exactly what the Tamko-spec materials cost versus the install. Under Clause 1 of The Haven Standard, that price is fixed before anyone picks up a tool, and no change proceeds without a signed change order. The work carries our 365-Day Done Right Promise – if it’s not done right, we make it right.

DIY or Call Us?

You can safely check the obvious: measure the affected area, photograph the discoloration, look for the printed spec on the membrane roll, and note whether the floor feels soft underfoot. Where owners get into trouble is at the waterproofing layer itself – a membrane that’s cut, patched, or re-bonded without the right primer and overlap direction will leak again within a season, and by then the substrate behind it may need replacing too. That’s not a scare tactic; it’s the most common callback we see. If you’ve reached the point where water is getting in, call (844) 320-5930 and we’ll schedule a free estimate with a written price and a photo record of what we found.

FAQs

A tile setter installing wall tile in a shower

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A single-story rear room addition with tall windows and a new patioA new clay tile roofNew double-hung windows in a dining roomA new front yard fence with a matching gateA new paver pool deckAn open kitchen and dining area after a remodel

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Rowan in Glendale

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Glendale team

A local vetted partner works across Glendale and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 320-5930
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Rowan Construction Group Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch