A Rowan company - serving Glendale, CA
A remodeled primary bathroom with a soaking tub and a walk-in shower
S
Sterling · Glendale

Sterling Home Additions & ADU in Glendale, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Glendale
A remodeled hall bathroom with subway tile and a floating vanity
A remodeled hall bathroom with patterned floor tile and painted walls
A wood double vanity with two mirrors after a bathroom remodel
A new curved paver walkway to the front porch
A galley kitchen opened up to the dining room with a new peninsula
A remodeled family room with new windows and a window seat
A standing-seam metal roof over a covered porch
A new bay window with a cushioned seat
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Sterling Home Additions & ADU: The Glendale Owner’s Guide

We build and finish Sterling-spec home additions and ADUs across Glendale, and the installed price for a full home addition runs $45,000 – $130,000, while a detached or attached ADU runs $90,000 – $220,000. Sterling is a finish-and-fixture brand, not a structural shell, so the work splits cleanly in two: the framing, foundation and envelope that make the space legal, and the Sterling-grade doors, windows, cabinetry and trim that make it match the house. Most Glendale owners discover the gap the same way: a permit inspector flags an unpermitted rear addition on a title report, a converted garage turns out to have no insulation or rated egress, or a “finished” ADU fails because the Sterling slider was set into a wall framed for a standard unit and never flashed correctly.

Call (844) 320-5930

Key Takeaways

  • Sterling-spec home additions in Glendale: $45,000 – $130,000 installed.
  • Sterling-spec ADUs in Glendale: $90,000 – $220,000 installed.
  • Garage conversions run $30,000 – $80,000 and are the most common starter ADU here.
  • We’re an independent contractor, not affiliated with Sterling. We build to Sterling specs and source matching components.
  • Every job carries a flat written price before work starts, signed change orders only, and a photo record when we leave.

Which Sterling Models This Applies To

A tile setter installing wall tile in a shower

Sterling’s residential line covers entry and interior doors, vinyl and wood windows, sliding patio doors, and a trim and millwork catalog, and the model number is the whole game. Before we quote anything, we read the label. On Sterling doors it sits on the top edge of the slab or the hinge jamb; on windows it’s a sticker on the head jamb or a stamp on the sash, and it encodes the series, the size call-out (width by height in inches) and the handing. Write it down exactly. A “3068” door is 36 inches by 80 inches; order a 2868 by mistake and it will not fit the rough opening you already framed.

The OEM-versus-aftermarket call depends on what’s failing. For a Sterling window where only the glass unit has gone, a matched insulated glass unit is cheaper and keeps the original frame and warranty intact than a full replacement. For a Sterling interior door that’s been damaged, a same-spec aftermarket slab in the correct handing and thickness is a fair substitute and often faster to get. For exterior doors and windows that carry the building envelope, we stay with Sterling-spec components so the flashing, sill pan and weather seal match what the wall was built for. If you have the model label, bring it. It turns a week of guessing into an afternoon.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Sterling Home Additions & ADU Is Failing

  • Water staining at the interior head or sill of a Sterling window or patio door. That’s usually a failed sill pan or missing flashing at the rough opening, not the unit itself. By the time you see the stain, the sheathing behind it has been wet for a season.
  • A door that sticks, drags or won’t latch through the year. In Glendale’s dry summers and wet winters, wood slabs and jambs swell and shrink more than owners expect. Sticking that changes with the season is a humidity-and-fit problem; sticking that never changes is a hinge or framing problem.
  • Fogging or condensation between the panes of a Sterling window. The sealed glass unit has lost its seal. It’s a glass swap, not a whole-window replacement, and it’s one of the most common calls we get on Sterling units.
  • An ADU or addition that fails inspection on egress or ceiling height. A rear addition or converted garage that was finished without permits almost always trips on door width, window egress or ceiling height. We measure against the current code before we quote a fix.
  • Gaps, drafts or visible daylight at trim and casing joints. Sterling trim and millwork that wasn’t acclimated to the house before installation will open at the miters within a year. It’s a fit-and-finish failure, and it’s correctable without tearing out the wall.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A finished backyard cottage with a small covered porch

Here’s the installed range for Glendale, in dollars, so you can compare before you call:

Scope Installed range
Home addition (Sterling-spec finish) $45,000 – $130,000
ADU construction $90,000 – $220,000
Garage conversion $30,000 – $80,000

What moves the number: square footage, whether the foundation and utilities are new or existing, the permit and inspection path through Glendale, and how much Sterling-grade finish you want (doors, windows, trim, cabinetry versus a code-minimum build). The quote we hand you is a flat written price with a written scope and a written warranty, broken out line by line so you can see parts and labor separately. No change order gets signed by us until you’ve signed it first. Under Clause 1 of The Haven Standard, the price is written before anyone picks up a tool, and on 4,000-plus jobs that discipline has kept projects within a few percent of the agreed number. The 365-Day Done Right Promise covers the work for a full year.

DIY or Call Us?

Some of this you can check yourself safely. Read the model label on your Sterling doors and windows and write it down. Measure the rough openings and the ceiling height in a converted garage. Photograph any water staining at a sill or head before you touch it. Where it goes wrong: structural openings, foundation and utility work on an addition or ADU, and anything that touches the building envelope. A window or patio door set without a proper sill pan and flashing will leak into the wall long before you notice, and pulling a load-bearing wall without an engineer’s stamp is how a cheap project becomes an expensive one. Addition and ADU work also means permits and inspections in Glendale, and unpermitted work is a problem that follows the house at sale. Call (844) 320-5930 and we’ll walk the space, tell you what we found in plain terms, and put the number in writing.

FAQs

A new roof with clean valleys and new flashing

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A new white vinyl privacy fence with a double gateNew painted shaker cabinets with an organized deep drawerA remodeled kitchen with a waterfall island and wood cabinetsA new multi-panel patio door opening a kitchen to the patioA new stained cedar privacy fenceA new paver patio with a seat wall and fire pit

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Rowan in Glendale

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Glendale team

A local vetted partner works across Glendale and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 320-5930
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Rowan Construction Group Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch