A Rowan company - serving Glendale, CA
A remodeled primary bathroom with a soaking tub and a walk-in shower
S
Sterling · Glendale

Sterling Driveway & Pavers in Glendale, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Glendale
A walk-in shower with large-format tile and a built-in niche
A remodeled hall bathroom with subway tile and a floating vanity
A remodeled hall bathroom with patterned floor tile and painted walls
A second-story addition that matches the existing roofline
A newly finished roof with a ridge vent and step flashing
A new front entry door with glass sidelights
A new black aluminum pool fence with a gate
A new curved paver walkway to the front porch
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Sterling Driveway & Pavers: The Glendale Owner’s Guide

We install and repair Sterling-compatible driveway and paver systems in Glendale, and the honest installed number runs $7,000 – $18,000 for a paver driveway, $4,500 – $12,000 for concrete, and $250 – $700 for sealing. Sterling is a real material line, not a single part, so “my Sterling driveway failed” almost always means one of four things: a paver that shifted or cracked, a failed polymeric joint, a settled base under the slab, or a sealing coat that wore through. Most Glendale owners find it the same way. A paver rocks underfoot after a rain, a hairline crack walks across three or four units, or the joints start spitting sand into the gutter every time the hose runs.

Call (844) 320-5930

Which Sterling Models This Applies To

A tile setter installing wall tile in a shower

Sterling paver lines are sold by profile and by thickness, and both matter. Standard driveway pavers sit at 60mm or 80mm; 60mm belongs on a patio or walkway, and putting it on a driveway with vehicle loads is the single most common compatibility mistake we see in Glendale. Measure the thickness of a loose unit with a tape before you order anything. Profile width and length vary by series too, so a replacement paver from a different Sterling run won’t key into your existing pattern cleanly.

Identifying the right match means three checks. First, the stamp or impression on the underside or side of a paver, which often carries the series name. Second, thickness in millimeters. Third, color and surface texture, because dye lots shift between production runs and a five-year-old faded paver will not match a fresh one out of the wrapper. Sketch the pattern and count the units you need before you call anyone.

On the OEM-versus-aftermarket question, we’re straight with Glendale homeowners: for pavers, a quality aftermarket unit of the same thickness and a close color match performs identically, and it’s usually cheaper. For the base and joint materials we specify real products by name, including Belgard and Techo-Bloc, rather than generics. Rowan Construction Group Glendale is an independent service provider and is not affiliated with Sterling.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Sterling Driveway & Pavers Is Failing

Each of these points to a specific cause, and the cause decides the fix.

  • Pavers rocking or dipping underfoot. The bedding sand has washed out or the base wasn’t compacted to depth when it was laid. Fixing the surface without fixing the base buys you one wet season.
  • Joint sand washing out after rain. Polymeric joint sand has broken down or was installed in wet conditions. In Glendale’s dry stretches followed by hard winter rain, a failed joint opens fast and lets water into the base.
  • Hairline cracks crossing multiple pavers in a line. This is usually a base failure or root heave underneath, not bad pavers. A single cracked unit is impact damage; a crack that jumps three units is structural.
  • Sunken or heaved slab sections on a concrete driveway. Soil movement and poor drainage at the apron. Glendale’s clay-heavy soils expand and contract with our wet-dry cycle, and an apron that ponds water will always fail first.
  • Sealer peeling or turning chalky. A sealer applied over a damp or dirty surface, or one past its service life. It looks cosmetic and isn’t – a failed sealer lets water into the joints and hastens everything above.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A remodeled kitchen with a waterfall island and wood cabinets

The range depends on square footage, base condition, access, and whether we’re resetting existing pavers or replacing them outright. Here’s what Glendale homeowners actually pay:

Work Installed Range
Paver driveway installation $7,000 – $18,000
Concrete driveway installation $4,500 – $12,000
Asphalt driveway paving $3,500 – $9,000
Driveway replacement $5,000 – $14,000
Driveway sealing $250 – $700
Paver patio installation $3,500 – $11,000

The low end assumes a sound base and good access; the high end means excavation, new base, and drainage work. Under the Haven Standard, you get a flat written price with a written scope before anyone picks up a tool, and no change proceeds without a signed change order. The 365-Day Done Right Promise backs the work: if it’s not done right, we make it right.

DIY or Call Us?

Some things you can safely check yourself. Measure paver thickness. Look for the series stamp. Note where water ponds. Photograph the failing area with a ruler in frame so you have a record. That much is useful and costs nothing.

Where it goes wrong is the base. Resetting a few pavers over a bed that wasn’t compacted properly, or sealing over a damp joint, is a weekend of work that fails in one rain. Slab replacement and anything involving a saw, excavation, or vehicle-load structural work is not a homeowner job, and we’ll say so plainly. Send us a photo and we’ll tell you what we can see. Call (844) 320-5930 to schedule a free estimate.

FAQs

A finished backyard cottage with a small covered porch

How long does a Sterling paver driveway last in Glendale? Fifteen to twenty-five years with a properly compacted base and resealing every three to five years, though Glendale’s dry-then-wet winters wear joints faster than the pavers themselves. Call (844) 320-5930 for an exact quote – estimates are free.

Can it be repaired instead of replaced? Often yes. Resetting, re-sanding, and resealing a failing section costs a fraction of a full replacement, and we’ll tell you honestly when repair will hold and when it won’t. A written price before work starts is standard here.

How long does the job take? Sealing is a single day. Resetting a section runs one to two days. A full paver driveway typically takes three to five days including base prep and cure time. Call (844) 320-5930 and we’ll give you a written timeline with the price.

How do you handle the part and the material? We match the Sterling profile and thickness by measurement and stamp, source from fifty-plus vetted brands including Belgard and Techo-Bloc, and put the flat price in writing before any work begins. Bring a competitor’s estimate and we’ll review it line by line at no charge.

If you have a failing Sterling driveway or paver system in Glendale, call (844) 320-5930 for a free estimate. You’ll get a flat written price and a documented photo record of what we found, every time. We also service KraftMaid, Cambria, and Silestone products on other trades.

Written by the team at Rowan Construction Group Glendale, serving Glendale and nearby areas.

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A standing-seam metal roof over a covered porchA new bay window with a cushioned seatA new wood side gate with black hardwareA new concrete driveway with a paver borderA stone counter, tile backsplash and open shelf after a kitchen remodelA garage converted into a guest room and home office

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Rowan in Glendale

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Glendale team

A local vetted partner works across Glendale and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 320-5930
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Rowan Construction Group Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch