A Rowan company - serving Glendale, CA
A remodeled primary bathroom with a soaking tub and a walk-in shower
Schluter · Glendale

Schluter Roofing in Glendale, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Glendale
A remodeled hall bathroom with subway tile and a floating vanity
A remodeled hall bathroom with patterned floor tile and painted walls
A wood double vanity with two mirrors after a bathroom remodel
New painted shaker cabinets with an organized deep drawer
A remodeled kitchen with a waterfall island and wood cabinets
A finished backyard cottage with a small covered porch
A new roof with clean valleys and new flashing
A new multi-panel patio door opening a kitchen to the patio
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Schluter Roofing: The Glendale Owner’s Guide

We install Schluter-compatible roofing systems across Glendale, and a failed component typically runs $400 – $1,800 to repair or resets within a full roof replacement of $8,000 – $20,000 depending on what the failure exposed. Schluter’s roof-side line is small and specialized (it is best known for tile and shower waterproofing), so the part on your roof is usually a waterproofing membrane, a drainage mat, or a profile edging piece rather than a shingle or tile itself. Owners in Glendale tend to discover the failure the same way: a stain ghosting across a ceiling in Atwater Village after the first real rain, or a lifted edge on a flat section over a garage in Adams Hill.

Call (844) 320-5930

Which Schluter Models This Applies To

A tile setter installing wall tile in a shower

Schluter’s roof-related products fall into a few families, and matching the right one matters before anyone quotes you. KERDI and KERDI-BAND are waterproofing membranes, commonly specified under tile on low-slope and terrace assemblies. DITRA is an uncoupling membrane used where tile sits over a substrate that moves. SCHIENE and RONDEC are profile edgings that finish tile edges and protect corners. TROBA is a drainage mat, and KERDI-DRAIN handles deck drains on flat assemblies.

To identify what you have, look for the printed roll edge or the box label (Schluter prints the product name and roll dimensions directly on the membrane). Measure the width and thickness with a tape; a 5/16-inch vs. 3/8-inch build-up changes what can go back over it. The OEM-vs-aftermarket decision is less about price here and more about assembly warranty: Schluter ties its waterproofing warranty to using its own components together, so mixing a third-party membrane into a KERDI assembly can void coverage. An independent contractor, which we are (and we are not affiliated with Schluter), will tell you plainly which pieces must stay brand-matched and which can be substituted safely.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Schluter Roofing Is Failing

  • Water staining on the ceiling below. The membrane has lost its seal at a seam or penetration, letting water track past the waterproofing layer. This is the most common indicator we see on Glendale tile-over-flat assemblies.
  • Lifted or curled profile edges. A SCHIENE or RONDEC edge that has popped means the bonding layer failed, often from thermal cycling on a south-facing slope that bakes in Glendale summer heat.
  • Soft or spongy deck underfoot. Movement in the substrate has fatigued the uncoupling membrane, and the tile or finish above is no longer isolated from that movement.
  • Standing water or poor drainage. A clogged or crushed TROBA drainage mat traps water against the assembly, which accelerates membrane breakdown.
  • Visible cracks along membrane seams. Sun exposure and age have embrittled the seam tape; on a low-slope roof the seam is usually the first place to go.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A single-story rear room addition with tall windows and a new patio

For Glendale, membrane repair or localized replacement generally runs alongside our standard roof repair range of $400 – $1,800. Tile roof repair where the membrane sits under tile runs $600 – $2,500. If the failure has compromised enough of the assembly that replacement makes more sense, a full roof replacement runs $8,000 – $20,000, and a metal roof installation, if you are switching assemblies, runs $15,000 – $40,000.

What drives the range: how much square footage the membrane covers, whether tile has to come up and go back, the number of penetrations (vents, skylights, deck drains) that need re-flashed, and whether the substrate itself is sound. Our quote is a flat written price with a written scope before any work starts, and no change proceeds without a signed change order. Parts and labor are itemized, not bundled into one number. Installation work is covered under our 365-Day Done Right Promise. Free second opinion on any written estimate you have from another contractor is available at no charge.

DIY or Call Us?

Some inspection is safe for an owner: from the ground or a window, check for lifted edges, staining on ceilings below, and debris blocking drainage. What we don’t recommend is stripping and reinstalling a waterproofing membrane yourself. Getting the overlap direction, the seam tape, and the drainage fall wrong on a flat or low-slope assembly is how a small leak becomes a rotted deck, because the membrane is your only line of defense and there is nothing above it to catch a mistake. That work belongs to a trained professional who can verify the substrate and document what they found. Call (844) 320-5930 to schedule a free estimate, and we’ll tell you what we see before anyone touches the roof.

FAQs

A new clay tile roof

How long does Schluter roofing membrane last? A correctly installed KERDI assembly on a protected roof can last 25 – 30 years, but in Glendale’s inland heat and UV exposure, seams and exposed edges degrade faster than the membrane field itself, so seam condition matters more than age. Call (844) 320-5930 for an exact assessment, free of charge.

Can it be repaired instead of replaced? Often yes. A localized seam failure or a single penetration leak can be repaired without tearing up the whole assembly, and repair runs $400 – $1,800 in Glendale. Whether repair or replacement makes sense depends on how much of the membrane has failed, which we document with photos on the visit.

How long does the swap take? A localized membrane repair is typically a one-day job. A full assembly replacement depends on roof size and tile removal, and we give you the timeline in the written scope before work begins. Call (844) 320-5930 to schedule your free estimate.

How do you source the part? We source Schluter components through supplier channels and match the specific product line and dimensions to your existing assembly, which is why we identify the roll label and thickness first. We hold no parts inventory and carry nothing on a truck; the part is ordered to spec once the scope is agreed. Related brands we also work with on Glendale projects include KraftMaid, Cambria, and Silestone for interior work.

Written by the team at Rowan Construction Group Glendale, serving Glendale and nearby areas.

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A stone counter, tile backsplash and open shelf after a kitchen remodelA garage converted into a guest room and home officeNew architectural shingles with a clean valleyA new casement window over a kitchen sinkA new white vinyl privacy fence with a double gateA new stained cedar privacy fence

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Rowan in Glendale

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Glendale team

A local vetted partner works across Glendale and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 320-5930
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Rowan Construction Group Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch