A Rowan company - serving Glendale, CA
A remodeled primary bathroom with a soaking tub and a walk-in shower
Schluter · Glendale

Schluter Bathroom Remodeling in Glendale, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Glendale
A remodeled primary bathroom with a soaking tub and walk-in shower
A freestanding soaking tub in a remodeled primary bathroom
A walk-in shower with large-format tile and a built-in niche
A new paver patio with a seat wall and fire pit
A single-story rear room addition with tall windows and a new patio
A new clay tile roof
New double-hung windows in a dining room
A new front yard fence with a matching gate
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Schluter Bathroom Remodeling: The Glendale Owner’s Guide

Schluter bathroom remodeling in Glendale typically runs $9,000 to $28,000 installed, depending on tile area, whether we’re rebuilding a shower pan, and how much of the existing framing and plumbing we can keep. The bonded waterproofing system is what makes the difference: Schluter KERDI membrane, DITRA uncoupling mat, KERDI-BOARD panels and the matching drain and profile pieces work as one assembly, so a single failed part usually means water has been getting where it shouldn’t. Owners in Glendale call us most often after a loose tile sounds hollow underfoot, a shower pan drain shows a hairline crack at the flange, or grout along a curb keeps going dark no matter how many times it’s sealed.

Call (844) 320-5930

Which Schluter Models This Apply To

A tile setter installing wall tile in a shower

Schluter isn’t one product, so matching the right part starts with identifying which line is already in your bathroom. The common ones we see in Glendale bathrooms are DITRA and DITRA-HEAT uncoupling mats under floor tile, KERDI and KERDI-BAND sheet membrane in showers, KERDI-BOARD foam backer panels for walls and benches, the KERDI-LINE linear drain and KERDI-DRAIN point drain assemblies, and the SCHIENE, JOLLY and RONDEC edge profiles that finish tile edges.

Identification is mostly measurement and labeling. DITRA and DITRA-HEAT come in 1/8 inch and 5/16 inch thicknesses, and the mat’s fleece side faces the substrate, so a scrap pulled from a failed floor tells you which you have. Drain assemblies are stamped on the flange with the series. KERDI-BOARD panels are printed along the edge with thickness (1/2, 5/8, 3/4, 1, 1 1/2 or 2 inch) and panel size. Write those numbers down before you call anyone, including us.

On OEM versus aftermarket: for the waterproofing membrane and drain flange, we specify Schluter-made parts, because the system’s warranty logic depends on matched components and mixing brands voids that logic. For edge profiles and trim, a quality aftermarket equivalent is a reasonable call when the sizing matches. We’ll tell you which is which in writing.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Schluter Bathroom Remodeling Is Failing

Here’s what failure actually looks like, and why each symptom shows up:

  • Hollow-sounding floor tile. The thinset has debonded from the DITRA mat, usually because the mat was installed with the wrong trowel notch or the fleece was contaminated with dust. It sounds like a drum when tapped.
  • Grout that won’t stay sealed around the shower base. Water is moving behind the tile through a breached KERDI seam or a missed KERDI-BAND overlap at a corner. Re-sealing grout hides it for a month and then it returns.
  • A hairline crack ringing the drain. The KERDI-DRAIN flange connection has separated, often from movement in the subfloor or a pan that was poured without the required mortar bed under the tray.
  • Soft or crumbling drywall at the shower’s outside corner. Moisture has traveled past the membrane edge. This is common in Glendale’s older Spanish-revival bathrooms where the original framing wasn’t square and the panel joints were shimmed.
  • Lippage at tile edges along a profile. The SCHIENE or JOLLY profile has lifted or the tile beneath it has moved, which points to substrate deflection rather than the trim itself.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A new paver pool deck

A full Schluter-system bathroom remodel in Glendale runs $9,000 to $28,000. A smaller bathroom, typically under 40 square feet of floor, lands at $5,000 to $12,000. If the failure is isolated to a shower, a walk-in shower installation runs $4,500 to $12,000, a tub-to-shower conversion $3,500 to $10,000, and a shower replacement $3,000 to $8,500. A vanity swap on its own is $800 to $3,000.

What moves you within that range: total tile square footage, whether the pan is poured fresh or a tray is reused, the drain type (linear KERDI-LINE costs more than a point drain), and how much framing and plumbing has to be opened up once the membrane comes off. Every quote is a flat written price with a written scope and a written warranty before work starts, and materials are listed line by line so you see the membrane, drain, profiles and setting material separately from labor.

DIY or Call Us?

Some of this you can safely check yourself. Tap the floor tile with a coin and note where it sounds hollow. Look at the drain flange for cracks. Run a level across a shower curb. Take photos of the labels on any exposed membrane or panel edge. None of that involves opening a wall or cutting into a waterproofed assembly.

Where DIY goes wrong is at the membrane and the drain. KERDI seams have to overlap by a set amount with the correct thinset and a fully embedded bond, and the drain flange has to sit at the exact height the tray or mud bed requires. Get either wrong and the leak returns inside a season, often in a spot you can’t see until the ceiling below stains. There’s no electrical or gas danger in a Schluter system, but there is real risk of trapping moisture in wall cavities and framing, which is expensive to fix later. Call (844) 320-5930 and we’ll tell you honestly whether you’re looking at a repair or a rebuild.

FAQs

An open kitchen and dining area after a remodel

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A new roof with clean valleys and new flashingA new multi-panel patio door opening a kitchen to the patioA new stained cedar privacy fenceA second-story addition that matches the existing rooflineA newly finished roof with a ridge vent and step flashingA new front entry door with glass sidelights

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Rowan in Glendale

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Glendale team

A local vetted partner works across Glendale and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 320-5930
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Rowan Construction Group Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch