







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Oldcastle Driveway & Pavers: The Glendale Owner’s Guide
We install and repair Oldcastle-compatible driveway and paver systems throughout Glendale, and most residential paver driveways land between $7,000 and $18,000 installed, with patio work running $3,500 to $11,000. There’s no same-day install for paving – a driveway is a multi-day job once the base is cut, graded and compacted – but we price it in writing before anything gets moved. Oldcastle is a brand of hardscape and masonry products, not a single product line, so the page that follows assumes you own the pavement itself and the part that’s failing is a component of it: a cracked paver, a settled edge, a joint that’s washing out, a sealer that’s flaked off. If you’re not sure which, read on and match your symptom.
Key Takeaways
- Oldcastle covers a family of paver, wall and concrete lines – the exact spec matters for replacement matching.
- Glendale’s seasonal swing between dry heat and winter rain is the main driver of paver failure here.
- Most failures trace to the base and joints, not the paver surface.
- We quote a flat written price with a written scope before work begins.
Which Oldcastle Models This Applies To

Oldcastle’s paver catalog is broad, and the lines you’ll most often find under a Glendale driveway or patio are the interlocking concrete paver series sold through masonry yards and big-box suppliers – often under the Oldcastle APG umbrella alongside brands like Belgard and Techo-Bloc. The practical problem for a repair is that a paver’s profile, thickness and color lot have to match what’s already down, and Oldcastle has changed formulations and discontinued colors over the years. A six-year-old driveway in Glendale may have a paver that’s no longer in current production.
Identify your paver the way a crew does: pull one loose unit or photograph a corner, measure its thickness (residential pavers commonly run about 2 3/8 inches, with heavier 3 1/8 inch units on driveways), and check the underside or a pallet tag for a manufacturer stamp. Bring that to a masonry supplier and they can usually match the profile. On the OEM-vs-aftermarket question: an exact Oldcastle color and profile match is the cleanest fix if you can source it, but a compatible same-thickness paver from another line is fine structurally – the only cost is a visible color patch in the field. We don’t claim to stock Oldcastle parts, and no parts ride on a truck; we source against your actual spec at the yard.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Oldcastle Driveway & Pavers Is Failing
- Loose or rocking pavers. Usually a base failure – the compacted gravel layer under the sand has settled or wasn’t deep enough, so the unit no longer bears evenly. This is the most common call we get in Glendale.
- Joint sand washing out. Water running through the joints after heavy winter rain strips the sand and lets units shift. Left alone, it becomes the loose-paver problem above.
- Edge settling or spreading. The plastic edge restraint has broken or pulled free, letting the whole field creep. It’s a small part that causes a large repair if ignored.
- Efflorescence or white haze. A mineral bloom that rises out of damp concrete – mostly cosmetic, but it signals moisture sitting in the pavement that also shortens sealer life.
- Sealer flaking or dulling. Film-forming sealer breaks down under Southern California sun and needs recoating, a task that runs $250 to $700 for a residential driveway. Flaking means the old coat has to come off before a new one goes down.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what these jobs run in Glendale, priced as installed work – materials plus the labor to set, cut and compact:
| Scope | Installed range |
|---|---|
| Paver driveway installation | $7,000-$18,000 |
| Paver patio installation | $3,500-$11,000 |
| Driveway replacement (full tear-out) | $5,000-$14,000 |
| Driveway sealing | $250-$700 |
What drives the range: square footage, whether the base has to be re-excavated, paver thickness and line, and access. A tight Glendale hillside driveway with a narrow approach costs more in handling than a flat pad. Our quote is transparent on both sides – the paver and base material and the labor to lay it – so you can see what the part costs versus what setting it costs. The work carries our written warranty, backed by the 365-Day Done Right Promise.
DIY or Call Us?
You can safely identify the failure yourself. Photograph the loose units, measure thickness, check whether the joint sand is gone and whether the edge restraint has separated. That diagnosis is free and it tells us what to quote.
Where DIY goes wrong: re-laying a settled paver without fixing the base looks fixed for one season and fails again next winter. Cutting pavers to fit needs a wet saw and a steady hand on a 2 3/8 inch unit, and re-compacting a base without a plate compactor leaves it soft. Sealing is the one task an owner can reasonably tackle, but only after the pavement is bone dry – a Glendale summer gives you the window, a wet winter day doesn’t. Under Clause 1 of the Haven Standard, call (844) 320-5930 and we’ll put the price in writing before anything moves, with a free second opinion on any estimate you already have.
Frequently Asked Questions

A properly installed concrete paver driveway typically lasts 25 to 30 years or more, but that lifespan depends on the base and joints, not the paver surface. In Glendale, the fast-failing variable is water – dry summers then winter rain working into failed joints and soft base. Call (844) 320-5930 for a free assessment if yours is past the 20-year mark.
Usually yes. Loose or cracked units in a small area get lifted, the base re-compacted and re-graded, and matching pavers re-set – far cheaper than a full driveway replacement. We only recommend a tear-out when the failure runs across the field or the base has failed under a large share of it. Call (844) 320-5930 and we’ll tell you which one you’re looking at, free.
A localized repair with matching units is often a one- to two-day job; a full driveway replacement runs several days once you factor in base prep, compaction and joint sanding. Weather matters – we don’t seal or finish joints in the rain. Call (844) 320-5930 to schedule a free estimate and get a written timeline.
We match against the spec, not a guess – thickness, profile and color, sourced at a masonry yard when the original line is still in production. If your color lot is discontinued, we’ll show you the compatible alternatives and be plain about the color patch. Nothing is ordered until it’s on the signed written quote with a price. Call (844) 320-5930 to start.
For the rest of the home, Rowan also works with KraftMaid, Cambria and Silestone, and across all seven of our trades – kitchen and bathroom remodeling, roofing, windows and doors, fencing, additions and ADUs – every job gets a flat written price before work starts and a documented photo record when the crew leaves. We’re an independent contractor in Glendale, not affiliated with Oldcastle, and we’re glad to price a paver repair or a full install against your actual driveway.
Call Rowan Construction Group Glendale at (844) 320-5930 for a free estimate. Written price before any work starts, a free second opinion on any written quote, and the 365-Day Done Right Promise on the finished job.
Written by the team at Rowan Construction Group Glendale, serving Glendale and nearby areas.












