







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Glendale Homeowners Choose Mr-Glass Construction
Rowan Construction Group Glendale provides independent Mr-Glass construction service in Glendale, covering frameless shower enclosures, semi-frameless hinged doors, sliding tub-shower doors, and custom-cut mirror and glass wall panels. What sets our Mr-Glass work apart is documentation: a flat written price before any work starts, a photo record of what we found inside the wall before we hang a single panel, and a signed change order if the scope moves. We’re an independent provider, not affiliated with or authorized by Mr-Glass. Call (844) 320-5930 for a free estimate.
Why Trust Rowan Construction Group Glendale for Your Mr-Glass Construction?

Our technicians have up to 19 years of experience, and they work with Mr-Glass enclosure systems often enough to know the frame profiles by feel. That matters because Mr-Glass publishes its own fabrication specs, frame channels, and hardware schedules, and the installer has to read them correctly. A hinge template drilled upside down or a sweep cut two millimeters short is a call-back, and we’ve seen enough of them to skip the learning curve.
We source OEM-compatible gaskets, sweeps, hinges, and handle sets where the frame profile demands them. Where dimensions match cleanly, quality aftermarket seals do the job at a lower number on the quote. You’ll see which is which, line by line, before you decide.
Every visit includes a documented photo record as a standard deliverable, not an upgrade. If your enclosure was installed wrong before we arrived, the photos show the torqued glass or the un-shimmed wall in plain terms.
Warranty-safe service is the other half of the trust. Mr-Glass warranty terms generally require installation to spec, and drilling through a tempered panel edge or using an incompatible sealant can void coverage. We work within those limits and tell you plainly when a repair would jeopardize the warranty.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Mr-Glass Construction Problems We Fix in Glendale
- Failed hinge and bottom-rail gaskets. Clear sealant and sweep gaskets degrade over a few years, and water finds the gap. On a frameless Mr-Glass panel it tracks onto the curb and behind the tile, which is where the real damage starts. The fix is usually new OEM-spec sweeps and re-sealing with neutral-cure silicone, not a new enclosure.
- Edge chips at bore holes on tempered panels. Tempered glass drilled for handle or hinge hardware develops edge chips at the bore holes, and those chips can turn into a full shatter without warning. It’s the single most common cause of “my door just exploded.” Any chipped panel gets replaced, not patched.
- Pitted anodized frames on hard-water baths. Cheap anodized finishes on semi-frameless units pit and chalk, especially around the bottom track where Glendale’s mineral-heavy water pools. Once the finish fails, the aluminum corrodes and the track loses its seal line.
- Sagging doors from out-of-plumb walls. Glendale’s older half-bath and full-bath layouts often sit against original 1920s-1950s plaster walls that are out of plumb by more than a frameless door can absorb. When the factory hinge template sits wrong, doors sag and stop meeting the strike-side jamb. Fixing the plumb is part of the job, not an extra.
- Sliding-door track wear. On Mr-Glass sliding glass tub-shower doors, the bottom track roller wears and the panel starts dragging. A dragging panel stresses the frame connections, and once the track is scored the seal line can’t be restored. Replacing the rollers early is far cheaper than replacing the assembly.
Mr-Glass Parts & Our Repair-vs-Replace Approach

The decision to repair or replace comes down to three things: whether the panel is chipped, whether the wall can be shimmed to plumb, and whether the frame profile accepts standard parts. Mr-Glass-spec OEM gaskets, sweeps, hinges, and handle sets are the right call where the frame channel is proprietary. Quality aftermarket seals work when the dimensions match, and that keeps cost down.
What we don’t do is try to save a chipped tempered panel. Tempered glass can’t be drilled or polished safely once it’s installed, so a chip means a new panel. Honest advice on that saves homeowners from a shatter down the road. We don’t claim local parts stock or next-day availability, because we don’t carry inventory. Parts are sourced per job to the spec the enclosure requires.
Call (844) 320-5930 if you want a written price on repair versus replacement before you commit to either.
Our Mr-Glass Service Process – Step by Step
- 1
Diagnosis. We check the enclosure for plumb, inspect the curb for slope, and photograph the hinge side, the bottom track, and any panel edge chips. The photo record goes to you.
- 2
Written price. Before anyone touches the glass, you get a flat written price with a written scope. No “call for a quote.”
- 3
Repair or install. Hardware gets replaced with Mr-Glass-spec parts where required. Walls get shimmed to accept the frameless panel properly. Custom-cut mirror and wall panels are measured to the opening, not the catalog.
- 4
Test. We run water at full pressure for a set period and check for tracking behind the tile, door clearance on the strike side, and sweep contact along the curb.
- 5
Warranty and documentation. You receive the written warranty and the completed photo record, and the crew leaves with the job signed. Any scope change needs a signed change order first. That’s Clause 1 of the Haven Standard, and it’s why our projects finish within a few percent of the agreed price.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Products We Service & Install in Glendale
We work across the Mr-Glass line that Glendale homeowners have in their bathrooms right now: frameless fixed-panel shower enclosures, semi-frameless hinged shower doors, sliding glass tub-shower doors, and custom-cut mirror and glass wall panels. Each has its own frame profile, hardware schedule, and seal spec. A frameless panel and a sliding unit fail in different places, so the diagnosis differs. For walk-in conversions and tub-to-shower work, the enclosure usually needs custom measurements rather than a stock size, which is where the wall-plumb check comes in.
We Also Service These Brands
Rowan Construction Group Glendale isn’t tied to one catalog. Alongside Mr-Glass, we service and install KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler and Toto fixtures. That range lets us price a bathroom job against competing enclosure options honestly, and lets us finish the surrounding work – vanity, countertop, tile – with the same written-price discipline.
FAQs – Mr-Glass Construction Service in Glendale

No. We’re an independent Mr-Glass service provider and installer, not affiliated with or authorized by the manufacturer. We work to Mr-Glass’s published fabrication specs and hardware schedules, and we say so plainly because it affects how warranty claims are handled. Call (844) 320-5930 for a free estimate.
Yes, where the frame profile requires them. We use Mr-Glass-spec OEM gaskets, sweeps, hinges, and handle sets when a proprietary frame channel demands that fit. Where dimensions match, quality aftermarket seals do the job at a lower price. You see which is which on the written quote before any work starts.
Most hardware and seal repairs run a partial day, and a full enclosure replacement typically runs one to two days once parts are sourced to spec. Custom mirror and wall panels add measurement and fabrication time. The written scope states the timeline up front, and any change in schedule comes with a change order. Call (844) 320-5930 to book an on-site measure.
We cover frameless fixed-panel shower enclosures, semi-frameless hinged shower doors, sliding glass tub-shower doors, and custom-cut mirror and glass wall panels. That’s the full residential range Glendale bathrooms use. If your unit falls outside those lines, we’ll tell you during the diagnosis.
It can, if the work is done off-spec. Mr-Glass warranty terms generally require installation to the published spec, and drilling through tempered panel edges or using incompatible sealant can void coverage. We work within those limits, and if a repair would jeopardize your warranty we say so before touching the glass.
Mr-Glass enclosure work in Glendale falls in these ranges, and you get a flat written price in dollars before any work starts:
| Service | Price range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Vanity Installation | $800 – $3,000 |
Actual cost depends on panel size, hardware, whether the wall needs shimming to plumb, and whether the curb needs rebuilding. Call (844) 320-5930 for an exact quote – estimates are free.
Book Your Mr-Glass Service in Glendale, CA
Whether your frameless enclosure is leaking at the hinge or your sliding track has scored past saving, you’ll get a flat written price and a photo record of what we found. Estimates are free, and we’ll review a competitor’s written quote line by line at no charge. Call (844) 320-5930 to schedule.
Written by the team at Rowan Construction Group Glendale.












