A Rowan company - serving Glendale, CA
A remodeled primary bathroom with a soaking tub and a walk-in shower
Moen · Glendale

Moen Windows & Doors in Glendale, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Glendale
A wood double vanity with two mirrors after a bathroom remodel
A remodeled primary bathroom with a soaking tub and walk-in shower
A freestanding soaking tub in a remodeled primary bathroom
A new roof with clean valleys and new flashing
A new multi-panel patio door opening a kitchen to the patio
A new stained cedar privacy fence
A new paver patio with a seat wall and fire pit
A single-story rear room addition with tall windows and a new patio
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Moen Windows & Doors: The Glendale Owner’s Guide

We install and repair Moen-compatible windows and doors in Glendale, with most whole-window replacements running $4,500 – $15,000 and impact-rated units $8,000 – $25,000 depending on count and spec. Patio door and hardware part replacements sit far below that, usually a service call plus the part. Owners almost always discover the failure the same way: a door that suddenly drags on the threshold, a multipoint lock that won’t catch, or a window that won’t stay shut against the evening breeze coming down off the Verdugo foothills.

Call (844) 320-5930

Which Moen Models This Applies To

A tile setter installing wall tile in a shower

Moen’s window and door line covers hinged patio doors, sliding patio doors, and a range of vinyl and aluminum-framed windows, and the part you need depends entirely on which series and vintage you have. The reliable path is the data plate: pull the manufacturer label from the top or side of the door slab or the window sash frame. It carries the model and series code, and that code is what any parts counter will ask for first. Here in Glendale, we regularly see labels baked by twenty summers of San Fernando Valley heat and unreadable by year eight, at which point the fallback is physical measurement. Sliding door rollers and tracks vary by fractions of an inch between series, and a roller that’s close but not exact will bind within months.

On the OEM-versus-aftermarket question: Moen OEM parts match the original fit and finish exactly and cost more. Quality aftermarket equivalents exist for common wear items like rollers, sweep gaskets, and weatherstrip, and they perform fine when the spec matches. For multipoint lock hardware and structural hinges, we lean OEM. We’re an independent service provider, not affiliated with Moen, so we source parts by model code rather than by brand loyalty.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Moen Windows & Doors Is Failing

  • The door drags or scrapes the threshold. Worn roller bearings or a track that’s out of level. Left alone, the dragging edge wears the slab and the seal fails within a season.
  • The multipoint lock won’t engage at the top or bottom. The lock points are out of alignment with the strike plates, usually because the door has shifted on its hinges. Forcing the handle bends the mechanism.
  • You feel air or heat at the frame. Compressed or cracked weatherstrip, common in Glendale where UV exposure degrades the gasket long before the glass shows any problem.
  • Condensation between the panes. The sealed insulated glass unit has lost its seal. No part fixes this, the glass unit is replaced.
  • The screen or sash won’t track smoothly. Corroded rollers, bent tracks, or a frame that’s twisted out of square. This is a hardware and alignment issue rather than a glass issue.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A new concrete driveway with a paver border

In Glendale, window replacement runs $4,500 – $15,000 for a typical set, and impact window installation runs $8,000 – $25,000. What drives the range: the number of openings, frame material, glass spec, and whether the existing rough opening needs repair once the old unit comes out. Hardware and part-level repairs are quoted separately as parts plus labor, both itemized on the written price.

Scope Installed range in Glendale
Window replacement (whole set) $4,500 – $15,000
Impact window installation $8,000 – $25,000
Door hardware / roller / weatherstrip repair Parts plus labor, quoted in writing

Every quote is a flat written price with a written scope before work begins, backed by the 365-Day Done Right Promise. If the rough opening turns up rot once the old frame is out, that’s a written change order you sign before we proceed.

DIY or Call Us?

An owner can safely check a few things: read the data plate, wipe off and inspect the track, watch the rollers while the door slides, and test the weatherstrip by hand. What goes wrong with DIY is alignment. A multipoint lock that’s forced into engagement bends the internal mechanism, and a sliding door roller swapped without leveling the track will bind and wear flat in weeks. Window glass replacement and impact-rated units should always be handled by a trained installer, both for a proper seal and for safe handling. Our technicians have up to 19 years of experience. Call (844) 320-5930 to schedule a free estimate.

FAQs

New painted shaker cabinets with an organized deep drawer

How long do Moen windows and doors last in Glendale? In Glendale’s heat and UV, weatherstrip and roller hardware typically need attention before the glass does, often within the first decade, while the frame and glass can run far longer. Call (844) 320-5930 for an exact quote; estimates are free.

Can a failing part be repaired instead of replaced? Often yes. Rollers, sweep gaskets, weatherstrip, and lock hardware are all replaceable without a new unit. The exception is a failed sealed glass unit, which is replaced rather than repaired. Call (844) 320-5930 to find out which category your issue falls in.

How long does the swap take? A hardware and part repair is usually a short service visit. A window or door replacement depends on the number of openings and whether the rough opening needs repair. Your written scope states the expected timeline before work starts. Call (844) 320-5930 for a free estimate.

How do you source the part? We pull the model and series code from the data plate and order to spec, either OEM or a quality aftermarket equivalent depending on which part. We don’t carry parts on a truck and don’t claim to have them in stock. We bring a written price first, and every visit includes a documented photo record of what was found and what was done. Call (844) 320-5930 to get started.

We also service KraftMaid, Cambria, and Silestone.

Call (844) 320-5930 to schedule your free estimate. We’re Rowan Construction Group Glendale, an independent provider, with a written price before any work starts and a live person answering calls around the clock.

Written by the team at Rowan Construction Group Glendale, serving Glendale and nearby areas.

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A new front yard fence with a matching gateA new paver pool deckAn open kitchen and dining area after a remodelA second-story addition that matches the existing rooflineA newly finished roof with a ridge vent and step flashingA new front entry door with glass sidelights

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Rowan in Glendale

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Glendale team

A local vetted partner works across Glendale and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 320-5930
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Rowan Construction Group Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch