







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Moen Home Additions & ADU: The Glendale Owner’s Guide
We build and finish Moen-plumbed additions and ADUs here in Glendale, and a full home addition typically runs $45,000 – $130,000 depending on square footage, foundation work, and whether it needs its own kitchen and bath. A detached or attached ADU runs $90,000 – $220,000. If you already have a written estimate in hand, we’ll review it line by line at no charge.
Most Glendale owners don’t come to this page because a fixture failed. They come because they’re planning a 400 to 1,000 square foot addition that needs its own bathroom or kitchenette, and they want to know whether their existing Moen setup (or a new Moen package) will survive the build and hold up afterward. The moment of discovery is usually a contractor’s walkthrough: a bath rough-in that needs a valve the plumber can rough in before drywall, a shower body that has to be decided before tile goes up. Put the brand decision off, and you’re paying a second time to open a wall.
To be clear about who we are: Rowan Construction Group Glendale is an independent construction contractor. We work with Moen fixtures, we plan around the brand’s valve and trim systems, but we are not affiliated with Moen.
Key takeaways
- Plan the Moen valve bodies and trim before framing closes. Changing a valve after tile is up costs far more than choosing it early.
- Home addition in Glendale: $45,000 – $130,000. ADU: $90,000 – $220,000. Garage conversion: $30,000 – $80,000.
- We work with other brands too, including KraftMaid, Cambria, and Silestone, so a Moen bath doesn’t have to dictate the rest of the finish schedule.
- Every project gets a flat written price before any work starts. No change proceeds without a signed change order.
Which Moen Models This Applies To

Moen’s residential lineup splits into a few families that matter for an addition’s plumbing schedule. The Moen 1222 and 1225 cartridge-era valve bodies are the classic single-handle tub/shower rough-ins, and you’ll still find them in older Glendale homes. Modern builds more often use Moentrol (pressure-balancing) or M-CORE rough-in valves. M-CORE is the one worth understanding before you frame a bath: the valve body is a single universal housing, so the trim and cartridge get chosen later, after drywall. That’s genuinely useful on an addition, because it lets you lock the rough-in schedule early and pick the finish at the end. Moentrol requires the trim decision sooner because the cartridge and body ship matched.
How to identify what you have: pull the handle and look for a stamped number on the cartridge or the plastic cover ring on the valve body. 1222 and 1225 are the two you’ll see most. Measure your valve body bore if the number’s gone – the cartridges differ in length and bore, and the wrong one won’t seat.
On the OEM versus aftermarket decision: Moen OEM cartridges carry the brand’s finish warranty and are the safe choice inside a wall you’ll never open again. Quality aftermarket equivalents exist and cost less, but on a home addition where a failed cartridge means cutting tile, the OEM part is the right call. On exposed trim, aftermarket is defensible because a failed trim is a five-minute swap, not a demolition job.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Moen Home Additions & ADU Is Failing
These are the symptoms that show up on the Moen plumbing side of an addition, along with what’s usually behind them.
- Shower handle gets stiff, then sloppy. The cartridge’s internal seals and friction ring are wearing. In Glendale’s hard water (the Metropolitan Water District supply runs hard, and it’s harder after a dry winter), mineral scale accelerates this.
- Temperature drifts when someone flushes a toilet. A pressure-balancing spool is sticking, usually on a Moentrol valve. On a new addition sharing a supply line with an old bath, this shows up fast.
- Water seeps from behind the escutcheon. The cartridge seals or the rough-in joint are weeping. Small now, but it’s soaking the substrate behind the tile.
- Drip continues after the handle is fully off. Worn cartridge seats. On hour one of a new addition, it’s a bad rough-in; on year three, it’s just a cartridge.
- Low flow at one fixture only. Usually a clogged aerator or a partially closed stop valve, not the cartridge. Worth checking before assuming the valve needs replacing.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

On an addition or ADU, Moen work is priced inside the overall build, not as a parts-and-labor add-on. Here are the Glendale ranges we quote for the addition package itself, plus the small swaps that come up on Moen fixtures once the addition is in use.
| Work | Glendale range |
|---|---|
| Home addition (all-in, incl. Moen bath/kitchen rough-in and trim) | $45,000 – $130,000 |
| ADU construction (attached or detached, incl. Moen plumbing package) | $90,000 – $220,000 |
| Garage conversion to living space | $30,000 – $80,000 |
| Moen cartridge or trim swap on an existing bath (in an active remodel) | quoted as a line item on the written estimate |
| Walk-in shower installation (with Moen valve) | $4,500 – $12,000 |
| Tub-to-shower conversion (with Moen valve) | $3,500 – $10,000 |
What drives the range: square footage, foundation and grading on the Glendale hillside lots, whether the addition needs its own panel or meter, and how many Moen fixture points it carries. What’s included: the flat written price, the written scope, the written warranty, a documented photo record on every visit, and signed change orders only. Parts and labor appear as separate line items so you can see where the money goes.
DIY or Call Us?
Here’s the honest split. You can safely identify your valve model, check your shower head and aerators for scale, and replace an exposed cartridge on a Moentrol or 1222/1225 valve if you’re comfortable shutting off the water and using a cartridge puller. Those are reasonable homeowner jobs.
What we don’t recommend: opening a wall, cutting tile to reach a valve, or taking on any part of the rough-in for an addition or ADU. Rough-in plumbing is a permitted, inspected scope in Glendale. A rough-in that fails inspection means a re-inspection fee and a re-opened wall. And a compromised shower valve inside a new wall is not a leak you can see coming – the damage shows up as swelling drywall and a soft spot in the floor months later.
If the Moen question is part of a bigger addition or ADU plan, that’s our call. Call (844) 320-5930 and we’ll talk through what the addition needs before a single permit is pulled.
FAQs

A Moen cartridge typically lasts 8 to 12 years in Glendale’s water, and hard water shortens that toward the low end. Scale buildup is the main cause of failure, so a whole-home softener on an addition pays for itself over the cartridge’s first life. If your cartridge is past that window, call (844) 320-5930 for a free estimate on the swap.
Sometimes yes – a stiff handle can often be fixed with a new cartridge and fresh silicone grease on the seals, no valve body replacement needed. What can’t be repaired is a cracked valve body or a rough-in joint that’s weeping inside the wall. That needs a replacement, and it needs the wall opened. Call us for a free estimate and we’ll tell you which one you’re facing.
A cartridge swap on an existing Moen valve usually takes 45 minutes to two hours once the water is off and the access is clean. If the valve is inside a tiled wall without an access panel, budget longer and expect tile repair. On a full addition, the Moen work is scheduled inside the build – typically two to three weeks from rough-in to trimmed and tested. Call (844) 320-5930 to get the scope in writing.
We order OEM Moen parts through the brand’s supply chain and match them to your valve model number, not to a photo of the handle. That means fewer wrong-part return trips and a documented record of the part number installed. If your valve is a discontinued model, we’ll tell you up front and price the rough-in change before anyone swings a hammer. Call (844) 320-5930 and we’ll confirm what’s available.
Rowan Construction Group Glendale quotes a flat written price before any work starts, and every project falls under the 365-Day Done Right Promise. Bring us a competitor’s written estimate and we’ll review it line by line at no charge. Call (844) 320-5930 for a free estimate.
Written by the team at Rowan Construction Group Glendale, serving Glendale and nearby areas.












