







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Moen Bathroom Remodeling: The Glendale Owner’s Guide
Bathroom remodeling in Glendale that works around Moen fixtures typically runs $9,000 – $28,000 for a full room, and smaller projects like a single valve rebuild and surround refresh land from $5,000 – $12,000. Most Glendale homeowners don’t call us until water is coming out the wrong place: a Moentrol valve that won’t hold temperature, a Posi-Temp cartridge that drips when the handle is off, or a tub spout diverter that spits back up the wall. We’re an independent contractor and not affiliated with Moen, but we know their trim families and rough-in valves well enough to quote the job in writing before anyone touches a wrench.
Which Moen Models This Applies To

Moen runs two valve families in most homes we open walls on in Glendale: Posi-Temp (single-handle, pressure-balancing, the 1222 and 1225 cartridge) and Moentrol (a push-pull handle with separate volume and temperature control, the 1200 cartridge). Newer builds and recent upgrades often use the M-CORE system with a 4-port rough-in. The part you need depends on which valve body is behind the wall, not which trim plate you bought. Moen’s model number on the trim box tells you the finish; the valve body is what fails. Look for the stamped numbers on the brass under the escutcheon, or photograph the valve with the handle off and bring the photo in. Your plumber can identify the cartridge from the valve style alone in most cases.
The OEM-versus-aftermarket decision matters here. Genuine Moen cartridges cost a bit more than a generic knockoff on a Glendale hardware shelf, but the brass body, O-ring tolerance, and 1222 vs 1225 sizing are what keeps the valve from weeping again in a year. Our technicians have up to 19 years of experience, and the pattern we see is clear: aftermarket cartridges fail early, especially on the pressure-balancing spool. We’ll show you the specific part we’re installing and its label before it goes in.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Moen Bathroom Remodeling Is Failing
- Drip from the spout when the handle is off. The cartridge seals have worn and the valve is passing water 24/7. Left alone, this adds up on your DWP bill and stains the tub.
- Water temperature swings when someone flushes. The pressure-balancing spool inside the Posi-Temp cartridge has stuck or the stops are partially closed. Common in older Glendale homes with shared supply lines.
- Handle feels stiff or grinds. Mineral scale from local hard water builds on the stem and cartridge face. This is a cartridge-swap symptom, not a whole-valve problem.
- Water leaks from behind the trim plate. The O-rings on the valve body or the cartridge seat have failed. This one can rot subfloor and framing if ignored for weeks.
- Shower diverter won’t fully switch. The diverter in the spout or the transfer valve has failed. Water runs out both the spout and the head at once.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Replacement pricing in Glendale depends on whether we’re swapping the cartridge or converting the whole valve rough-in. Cartridge and trim swaps fall inside a small bathroom remodel at $5,000 – $12,000 when the surround and fixtures are part of the job. Full bathroom remodels with new Moen rough-in valves and tile run $9,000 – $28,000. A walk-in shower install with new Moen valve and trim lands $4,500 – $12,000, and a tub-to-shower conversion runs $3,500 – $10,000. Vanity installations with Moen faucet and drain connections fall at $800 – $3,000.
What drives the top of the range: tile removal and backer replacement behind the failed valve, drywall repair in adjacent rooms, and whether the wall is plaster (common in Glendale homes from the 1920s – 1950s) or drywall. Every quote is a flat written price with a written scope before work begins. No work proceeds on a change until the change order is signed, and the work carries our 365-Day Done Right Promise.
DIY or Call Us?
A homeowner can safely do three checks: turn the water off at the fixture stops, remove the handle cap and handle to photograph the cartridge, and confirm the model number stamped on the brass. That’s it. We don’t recommend anyone with a Moen valve replace the cartridge themselves. The steps look simple in a video, but the cartridge sits inside a brass body under pressure, the retention clip is easy to lose down the drain, and forcing a stuck cartridge usually means cracking the valve body and opening a wall anyway. If the stops are frozen or the wall is plaster, the risk climbs fast. If you see water behind the trim or your handle won’t turn, call us at (844) 320-5930. We’ll trade a free second opinion on any written estimate you have.
FAQs

Most Moen cartridges run 8 – 12 years before seals and O-rings fail. Glendale’s hard water shortens that by a few years on any cartridge that hasn’t been flushed or drained at the stops during a renovation; we usually see failure 6 – 9 years in on high-cycle valves.
Yes, in many cases. A cartridge swap fixes drips, temperature swings, and stiff handles without opening the wall if the valve body is sound. If the brass is cracked or corroded through, the whole rough-in valve gets replaced, which is what pushes the job into the $5,000 – $12,000 remodel range. We’ll tell you which one you’re facing after we open the trim plate.
Cartridge and trim swap is 1 – 2 hours once parts are in hand. Valve body replacement with tile work is a 1 – 3 day job depending on how much backer and tile has to come out. We state the duration in the written scope so you can plan around it.
We match the part to the valve body, not the trim model. Identification comes from the stampings on the brass and the handle configuration (Posi-Temp single-handle vs Moentrol push-pull). We source the genuine Moen part and show you the label before installation. We don’t claim stock of parts. Every part arrives for your job.
We also service KraftMaid, Cambria, and Silestone when a Moen-fixture remodel rolls into cabinets or countertop work.
If your Glendale bathroom is showing any of the signs above, the fastest way to a real number is a call. Call (844) 320-5930 for a free estimate. We’ll identify the Moen valve, quote the fix in writing, and deliver the price before anyone picks up a tool. That’s Clause 1 of the Haven Standard. It’s the reason our projects finish within a few percent of the agreed cost across 4,000-plus jobs, and it’s what you should expect from any contractor entering your Glendale home.
Written by the team at Rowan Construction Group Glendale, serving Glendale and nearby areas.












