







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Kitchen Remodeling: The Glendale Owner’s Guide
We install and remodel kitchens built around KraftMaid cabinetry, and a full Glendale kitchen remodel with KraftMaid runs $14,000 – $45,000 installed, with the cabinet work itself landing between $4,000 and $13,000 depending on door style, box construction and layout. Rowan stays behind KraftMaid’s 1-2 week lead time measured in writing, so you know upfront. KraftMaid cabinets ship flat-packed with cam locks and dowels, which is why many Glendale owners discover the boxes have shifted only after the drawer fronts stop lining up at 3mm gaps.
KraftMaid is an independent brand; Rowan Construction Group Glendale is an independent service provider, not affiliated with KraftMaid. That matters for warranty sourcing and part matching, which we handle line-by-line.
Key Takeaways
- KraftMaid box cabinets in Glendale typically last 15-20 years before cam-lock joints loosen.
- Full kitchen remodel with KraftMaid: $14,000 – $45,000 installed in Glendale.
- Cabinet-only install: $4,000 – $13,000. Countertop: $2,000 – $6,500. Backsplash: $800 – $2,500.
- Glendale’s inland heat and seasonal humidity swing the door fronts and drawer boxes harder than coastal LA.
Which KraftMaid Models This Applies To

KraftMaid builds three main box series that Glendale owners most often have in place: a standard 1/2-inch particleboard box with plywood upgrade (most common in mid-2000s to 2010s tract and condo kitchens in Glendale), a 3/4-inch plywood box in the premium lines, and the fully frameless boxes used in some modern spec builds. Each series has its own hinge plate pattern, drawer glide mount spacing and shelf-pin pitch.
To match the right replacement part, look for the KraftMaid specification label inside the door or on the back of the drawer box. The label carries the door style name, finish code, and box series. If the label is gone, measure the drawer box front, side height, and the glide-mount hole spacing; KraftMaid uses a standard 32mm European shelf-pin pitch on most premium lines but not on all. Our crew photographs the label and measures the original before quoting so the part number matches the first time.
For countertops, KraftMaid cabinets pair cleanly with Cambria or Silestone slabs. Kohler sinks and faucets are also a common choice Glendale owners ask about during the same install. If you’re comparing aftermarket drawer glides for a KraftMaid box, the OEM Blum and Hettich equivalents are usually within $3-8 per piece of a generic replacement and hold alignment better over Glendale’s summer heat.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your KraftMaid Kitchen Remodeling Is Failing
- Drawer fronts drifting out of alignment after 3-5 years. Underlying cause: cam lock or dowel joint loosening in the box, common on KraftMaid’s particleboard boxes in Glendale homes where kitchen humidity swings from 30% to 65% between March and September.
- Doors rubbing the frame or catching on the adjacent door. Hinge plate screws backing out of the particleboard, or the European hinge cup pulling loose; KraftMaid’s standard hinge is a Blum clip-on, and the cup notch is 35mm, so a mismatched aftermarket hinge will not seat properly.
- Squeaking or binding drawer glides. The nylon rollers wear flat, or the glide track has lost its mount screw into the box side. KraftMaid uses undermount glides on premium lines; the mounting holes are not interchangeable with side-mount replacements.
- Water swelling at the toe kick or sink base. Glendale’s dry summers hide slow leaks until the cabinet floor swells 2-4mm and the bottom panel delaminates; the sink base is the most common failure point.
- Shelves sagging or shelf pins dropping out. The 32mm shelf-pin holes wallow out in particleboard after 12-15 years of a loaded upper cabinet; the fix is either a shelf-pin sleeve or a plywood box replacement.
Replacement Cost & What’s Included

Installed pricing in Glendale depends on the scope. A single cabinet box replacement typically runs within the cabinet installation range; a full KraftMaid kitchen remodel with all boxes, doors, drawer fronts and hardware runs $14,000 – $45,000 installed. What drives the range: door style (painted shaker costs more than thermofoil), box series (plywood over particleboard), sink base and appliance panel configuration, and whether the layout changes require new plumbing or electrical.
| Scope | Installed Price in Glendale |
|---|---|
| Full kitchen remodel (KraftMaid) | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| KraftMaid cabinet installation | $4,000 – $13,000 |
| Countertop (Cambria, Silestone) | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
Every Rowan quote is a flat written price with a written scope delivered before work starts. Parts and labor are broken out line by line so you can see what a KraftMaid door front costs versus what the install labor costs. The 365-Day Done Right Promise covers the workmanship; if something is not right within a year, we come back and make it right.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
An owner can safely tighten hinge screws, swap a shelf pin sleeve, replace a drawer glide that uses the same mount pattern as the original, or touch up a chipped door edge with the finish code from the KraftMaid label. Where DIY goes wrong on KraftMaid specifically: aftermarket hinges that look compatible but miss the 35mm cup by a hair, glide replacements that put new screws into wallowed-out particleboard, and cabinet removal to fix a sagging box that ends up cracking the adjacent cabinet because the boxes were assembled as a run, not individually.
A single hinge swap is a hand-tool job. Pulling a run of four boxes to replace a water-damaged sink base is not, because the countertop, backsplash and plumbing all come into play. If you’re not sure which side of that line your job sits on, call (844) 320-5930 and we’ll tell you over the phone whether it’s a 20-minute fix or a real replacement.
FAQs

KraftMaid cabinets typically last 15-20 years in Glendale before the box joints, drawer glides or hinges need replacement, with the particleboard boxes trending toward the lower end and the plywood series toward the upper. Glendale’s inland heat and dry summers are easier on the boxes than coastal humidity, but the seasonal swell-shrink cycle still works on the cam locks. Call (844) 320-5930 for a free estimate on cabinet replacement or repair.
Yes, in most cases. A single failed drawer glides, hinge, or water-damaged sink base can be replaced without touching the rest of the run, and KraftMaid stocks replacement parts for current and recent series. Full replacement only makes sense when three or more boxes have failed, or the layout itself needs to change. Call (844) 320-5930 with photos and we’ll tell you which one you’re looking at.
A single hinge, glide or drawer front swap is usually a 15-30 minute visit; a sink base or a run of boxes takes 1-3 days once the part arrives, plus KraftMaid’s lead time. Rowan schedules around the part delivery so you’re not without a working kitchen longer than necessary. Call (844) 320-5930 to schedule a free estimate.
We match the part by the KraftMaid specification label inside the door, or by measurement if the label is missing, then order direct through KraftMaid’s parts channel rather than an aftermarket substitute. Our technicians have up to 19 years of experience matching KraftMaid part numbers to box series, and every visit includes a documented photo record of the label, the measurement and the failed part before anything is ordered. Call (844) 320-5930 to start a free estimate.
Get a Written Price on Your KraftMaid Kitchen
If you’re in Glendale and your KraftMaid kitchen needs work, call Rowan Construction Group Glendale at (844) 320-5930 for a free estimate. We’ll photograph the labels, measure the boxes, match the right part, and put the price in writing before anyone picks up a tool. Estimates are free, the price is flat, and the 365-Day Done Right Promise is printed on every quote.
Written by the team at Rowan Construction Group Glendale, serving Glendale and nearby areas.












