A Rowan company - serving Glendale, CA
A home with a brand-new roof and gutters at golden hour
IKO · Glendale

IKO Driveway & Pavers in Glendale, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Glendale
A new clay tile roof
A newly finished roof with a ridge vent and step flashing
A walk-in shower with large-format tile and a built-in niche
A remodeled family room with new windows and a window seat
A new bay window with a cushioned seat
A new wood side gate with black hardware
A new concrete driveway with a paver border
A stone counter, tile backsplash and open shelf after a kitchen remodel
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

IKO Driveway & Pavers: The Glendale Owner’s Guide

We install and repair IKO-heavy driveway and paver assemblies in Glendale, with full paver driveway replacement running $7,000 – $18,000 and repairs and re-laying work priced from the written quote we hand you before anything gets lifted. The numbers that matter here: Glendale sits in a basin where summer surface temps on unshaded pavers push past 140°F, and the Santa Ana wind weeks in October and November strip moisture out of bedding sand fast. Most owners find out something’s wrong when a paver edge heaves in the driveway apron, a joint line opens to finger width after a hot week, or a section that looked flat in March holds a puddle by August. IKO’s hardscape line, sold under the IKO brand through regional distributors, isn’t a name most homeowners know from a shelf tag – which is exactly why we wrote this page.

Call (844) 320-5930

Key takeaways:

  • Paver driveway install in Glendale: $7,000 – $18,000. Repair and re-lay work quoted flat, in writing.
  • Compatibility questions usually come down to series, thickness, and color-lot, not brand name alone.
  • IKO pavers are typically 60mm or 80mm; the base prep under them decides whether they hold.
  • We’re an independent contractor. We are not affiliated with IKO.

Which IKO Models This Applies To

New architectural shingles with a clean valley

IKO’s hardscape catalog covers interlocking paving stones sold in the 60mm range for pedestrian and light-drive applications and 80mm units specified for vehicular driveways, with face mixes that vary by region. When a homeowner calls us about “an IKO driveway” the honest first step is identifying the exact series and unit thickness – not guessing from a photo. Three things tell you what you’re dealing with:

  • The stamp or box label. IKO paving units and their original cartons carry the series name and lot code. A photo of the label beats a photo of the paver, every time.
  • Unit thickness. Get a tape measure on a pulled unit. 60mm and 80mm are not interchangeable in a driveway; the sub-base depth and edge restraint are built around the thickness you actually have.
  • Color-lot code. Pavers are dyed in batches, and a lot from four years ago will not match a current lot exactly. If you’re patching, we plan for a visible blend zone rather than promising an invisible match.

OEM versus aftermarket for IKO comes down to what’s being replaced. If a single paver cracked, an identical IKO unit from a current lot is the cleanest fix, and it’s worth the wait. If a whole run is failing because the bedding layer was never compacted properly, no paver brand fixes that – the fix is the base, and we rebuild it with a compatible unit from IKO or a matched equivalent from another line (we also work with Belgard and Techo-Bloc). Glendale lots built before 1985 often have a concrete drive under the pavers, laid over a clay-heavy subgrade; we look at that before quoting anything.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your IKO Driveway & Pavers Is Failing

  • Heaving or rocking units near the apron. Water is getting under the pavers and freezing pressure into the bedding sand, which happens in Glendale’s colder January nights when drainage runs toward the street instead of away from it.
  • Joint sand washing out after rain. The polymeric or plain sand between units is migrating because the slope is off, not because the sand was bad. Resanding without fixing the grade buys you one wet season.
  • Ponding in low spots. A 1/4-inch dip over 6 feet is enough to hold water. Glendale’s clay soil holds moisture, and a paver field that drains poorly will loosen from underneath within two summers.
  • Hairline cracks spreading from the edge. Usually an edge restraint failure – the paver is trying to move laterally and the unit is taking the load. Cosmetic on its own, a sign of base movement when there are several.
  • Color fading unevenly across the field. Sun-facing sections in Glendale fade faster than shaded ones. Not a failure, but it makes patch matches harder and it’s worth knowing before you buy replacement units.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Roofers installing a new roof with safety harnesses

Here’s what Glendale homeowners pay for IKO-compatible work, with the ranges we hold to on every written quote:

Scope Glendale range
Paver driveway installation $7,000 – $18,000
Driveway replacement (full demo and rebuild) $5,000 – $14,000
Driveway sealing $250 – $700
Paver patio installation $3,500 – $11,000
Concrete driveway installation (if pavers aren’t the right call) $4,500 – $12,000

What drives a quote up: driveway apron permits and haul-off (Glendale drives with a street-facing apron trigger a permit and haul-off cost for the demo), sub-base depth (a 6-inch Class II base under 80mm pavers on a hill lot costs more than 4-inch on flat), and edge restraint – polymeric sand versus poured concrete curb. What drives it down: re-using units in a repair, and a base that’s actually sound. Under Clause 1 of the Haven Standard, you get a flat written price with a written scope before anyone starts, and no change proceeds without a signed change order. Every visit includes a documented photo record as standard, and the 365-Day Done Right Promise is printed on the page, backed by a terms sheet, not an asterisk.

DIY or Call Us?

What you can safely check on a Saturday morning: photograph the failing paver and its label, measure the thickness of a pulled unit, note where water pools after a rain, and confirm whether the drive sits over a concrete slab. That’s the diagnostic work, and it’s genuinely useful to bring to a quote.

What not to do: don’t lift a run of pavers over a suspected gas or irrigation line, don’t try to reset a driveway apron that’s heaved against a curb (the apron edge is load-bearing and a bad reset can push water toward the foundation), and don’t attempt to dig and recompact base under a loaded vehicle. Pavers aren’t dangerous the way live wiring is, but an improperly sloped drive directs stormwater into a slab or a wall footing, and that damage shows up years later and costs more than the repair.

Honest split: if a single unit is cracked and the base around it is firm, a replacement is something a careful owner can handle. If more than a handful of units are rocking, if there’s ponding, or if the base is in question, that’s our work. We’ll give you a free second opinion on any written estimate you’ve already got – bring it and we’ll go through it line by line at no charge. Call (844) 320-5930 to schedule.

FAQs

A freestanding soaking tub in a remodeled primary bathroom

How long do IKO pavers last in Glendale? Twenty-five to thirty years is realistic for a properly installed 60mm field, and the paver itself usually outlasts the base by a decade. The failure you’re seeing after ten to fifteen years in Glendale is almost always drainage or compaction, not the paver. Call (844) 320-5930 for a full estimate – it’s free.

Can my failing IKO driveway be repaired instead of replaced? Yes, in most cases – a joint re-sand, edge restraint rebuild, and re-laying of the affected run usually runs a fraction of full replacement. If the failure is isolated to one or two units, repair is clearly the right call. Call (844) 320-5930 and we’ll tell you which you actually need.

How long does a driveway swap take? A single-unit or small-run repair is typically a half to full day. A full paver driveway replacement in Glendale runs three to six days once the base is built and cured, weather depending. You’ll get the exact timeline in writing with the quote. Call (844) 320-5930 for your estimate.

How do you source IKO-compatible pavers for a Glendale job? Through IKO’s regional distributor network or a matched equivalent from Belgard or Techo-Bloc, identified by series, thickness, and color-lot. We buy from the same regional yards any licensed contractor in Glendale uses; we don’t carry stock, and no unit is ordered until the quote is signed. (We also work with KraftMaid, Cambria, and Silestone on other trades.) Call (844) 320-5930 – every estimate is free and in writing.

If you’re in Glendale and you’ve got a cracked paver, a heaving apron, or a joint line that won’t stay closed, call (844) 320-5930. We’ll come out, look at the base, tell you what we found, and hand you a written price – a flat quote with a written scope and a written warranty, not a “call for a quote.” Estimates are free. We are an independent contractor serving Glendale homeowners and are not affiliated with IKO.

Written by the team at Rowan Construction Group Glendale, serving Glendale and nearby areas.

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
New painted shaker cabinets with an organized deep drawerA remodeled hall bathroom with patterned floor tile and painted wallsA remodeled primary bathroom with a soaking tub and walk-in showerA single-story rear room addition with tall windows and a new patioNew double-hung windows in a dining roomA new front yard fence with a matching gate

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Rowan in Glendale

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Glendale team

A local vetted partner works across Glendale and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 320-5930
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Rowan Construction Group Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch