







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
GAF Home Additions & ADU: The Glendale Owner’s Guide
We build GAF-roofed home additions and ADUs in Glendale, and the installed numbers we quote run from $45,000 – $130,000 for a home addition and $90,000 – $220,000 for an ADU. These are planned projects, not same-day repairs – permitting and construction take real time, and we’d rather tell you that up front. The failure signs don’t usually show up in the GAF roofing material itself. They show up where the new roof meets your existing house: a stained ceiling after the first winter rain, a ridge line that reads crooked from the sidewalk, or a flashing detail a previous contractor improvised because changing the tie-in needed a signed change order and never got one.
Which GAF Products This Applies To

GAF doesn’t make additions – it makes the roofing and weatherproofing systems that cover them, and that’s where compatibility matters. On an addition or ADU in Glendale, the GAF spec usually means a Timberline U.S. shingle on the addition’s roof with underlayment, drip edge, and valley flashing selected to match or deliberately exceed what’s on the main house. The matching question isn’t one part number: it’s shingle line (Timberline HDZ vs. Timberline U.S. vs. a designer line like Grand Sequoia), color name, and whether the existing roof has one shingle layer or two.
Identify what you have by looking for a bundle wrapper in the garage, attic, or under the house, or by having the roof measured – shingle exposure and course count tell a trained eye more than any label. That measurement decides whether a matching addition is straightforward or needs a full main-roof tear-off for a clean line. GAF is our default, but we source at the same standard across KraftMaid, Cambria, and Silestone for the interior finishes, so the whole build gets one written scope. We’re an independent contractor and not affiliated with GAF.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your GAF Home Additions & ADU Is Failing
- Water staining at the tie-in wall. The junction where new framing meets the existing roof is the hardest detail in any addition. When flashing or step flashing is undersized, water finds the seam – in Glendale’s monsoon-style winter storms, usually within the first season.
- Shingles lifting or curling at the addition’s ridge and edges. Inland heat cycling warps shingles that were installed without proper attic ventilation or were fastened with the wrong nail placement. It reads as a GAF material problem but it’s an installation problem.
- Ceiling or wall stains inside the new space. These point to underlayment gaps or a missing ice-and-water shield at the valley, not to the shingle itself. The fix is at the membrane layer, not the surface.
- A crooked ridge or visible roofline sag. This is structural, not cosmetic – it means framing or sheathing wasn’t tied into the existing structure correctly. Have it evaluated before anything else is done.
- Drafts or moisture at the ADU’s roof-to-wall junction. Gaps in the weather barrier and improper soffit venting let Glendale’s hot, dry air into the assembly and trap condensation. Left alone, that becomes rot in the sheathing.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For a Glendale ADU, we typically see $90,000 – $220,000 installed; a home addition runs $45,000 – $130,000. The low end assumes a straightforward footprint and standard GAF Timberline shingles. The high end covers complicated tie-ins, a full main-roof tear-off to match the line, design-driven GAF lines, and interior finishes at the Cambria or Silestone tier.
What moves the number: the roof tie-in complexity, whether GAF shingles need to match an existing layer count, square footage, and permit requirements. Every quote is a flat written price with a written scope before work starts – under Clause 1, no work proceeds on a change until you’ve signed the change order, which is exactly why our projects finish within a few percent of the agreed number. The work carries our 365-Day Done Right Promise, and you get a documented photo record of what we found and what we did.
DIY or Call Us?
Some things you can check yourself, safely: look for ceiling stains, run a flashlight along the ridge from the ground, and pull out any GAF bundle wrapper or paperwork you have on file. What you should not do is climb onto the addition roof to re-flash the tie-in or try to patch roof-to-wall junctions yourself. That work is high off the ground, and a bad flashing detail you can’t see from inside will cost far more to correct than to do right the first time. Roofing and framing at the tie-in are work for a trained crew. For anything else – a stain that keeps coming back, a crooked line, a draft in the ADU – call us and we’ll tell you honestly what we see.
FAQs

A properly installed GAF Timberline shingle roof typically runs 25 – 30 years in Glendale’s climate. The shingle usually outlives the flashing detail at the tie-in, which is why we inspect and document the junction before anything else. Heat cycling is the deciding factor – correct attic ventilation adds years. Call us for a written assessment.
Usually yes. A leaking valley, a lifting ridge shingle, or a drafty junction is a targeted repair in most cases, not a rebuild. We tell you in writing which parts need replacing and which are fine. A structural sag is the exception and gets a full evaluation first. Call for a free second opinion on any written estimate.
A targeted flashing or shingle repair is often a one- to two-day job once the scope is set. A full addition builds over weeks and months depending on permits and square footage, and we’ll map that timeline in your written quote. We don’t promise same-day service on construction work, because that promise would be false.
We source through vetted suppliers and match the exact GAF line and color to your existing roof before ordering. You get the part spec written into the quote, no substitutes made silently. Estimates are free – call (844) 320-5930 and we’ll walk you through what we found.
If your Glendale home addition or ADU has a failing roof detail and you’re weighing a repair against the full picture, call (844) 320-5930 to schedule your free estimate. We’ll bring the written price, the scope, and the photo record – and you’ll see exactly what’s wrong and what it costs in writing before anyone picks up a tool.
Written by the team at Rowan Construction Group Glendale, serving Glendale and nearby areas.












