A Rowan company - serving Glendale, CA
A home with a brand-new roof and gutters at golden hour
GAF · Glendale

GAF Driveway & Pavers in Glendale, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Glendale
New architectural shingles with a clean valley
A new roof with clean valleys and new flashing
A remodeled hall bathroom with patterned floor tile and painted walls
A remodeled kitchen with a waterfall island and wood cabinets
A wood double vanity with two mirrors after a bathroom remodel
A finished backyard cottage with a small covered porch
A new multi-panel patio door opening a kitchen to the patio
A new stained cedar privacy fence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

GAF Driveway & Pavers: The Glendale Owner’s Guide

We build and repair GAF-spec paver driveways, walkways, and patios in Glendale, and paver driveway installation here runs $7,000 to $18,000 for a standard residential approach, with paver patios at $3,500 to $11,000. A failed joint, a settled edge course, or a cracked paver can be replaced as a repair rather than a full rebuild. GAF is best known for roofing, so most Glendale owners who call us about “GAF driveway & pavers” are dealing with a paver system installed by a crew who used GAF-branded accessories, or they own a home where the driveway meets a GAF roof and both need work at once. Rowan Construction Group Glendale is an independent contractor and is not affiliated with GAF. We source GAF roofing and compatible paver materials through vetted suppliers and install to spec.

Call (844) 320-5930

Key Takeaways

  • Paver driveway installation in Glendale runs $7,000 – $18,000; spot repairs are far less.
  • Most paver failures start underneath it, in the base course and the joint sand, not in the paver itself.
  • We name the flat written price before any work starts, in line with Clause 1 of The Haven Standard.
  • Every visit includes a documented photo record of what we found and what we did.

How Glendale owners usually find us

The story is almost always the same. A homeowner notices a wobble underfoot at the apron where the driveway meets the street. Or the joint sand washes out after the first big rain and stays out. Or a single paver rocks when the car rolls over it, and by the second season it has cracked. In Glendale, the specific trigger is often our climate: dry summers pull soil moisture down and shrink the subgrade, then the first winter storm sends water into the joints and the base shifts. More than any other failure we see here, it starts as a drainage and compaction problem, not a paver problem.

Which GAF Models This Applies To

A standing-seam metal roof over a covered porch

GAF’s residential lineup is built around the Timberline series (HDZ, UHDZ, AS II) and the Designer and Grand Sequoia lines for roofs. If your driveway ties into a GAF Timberline HDZ roof at the fascia and soffit line, and your driveway is a concrete or paver system that abuts the drip edge, that intersection is where most water-damage calls to us start. The paver systems we install and repair are not GAF-branded, but we install to GAF-adjacent specifications wherever paver meets roof, since the detail must coordinate with the drip edge, the splash path, and the slope of the apron.

Identifying the right system before you buy anything

  • Read the roof label first. The GAF shingle wrapper, or the GAF label tucked under the garage eave, names the series. That tells us the drip edge height and the splash zone to build around.
  • Measure the pavers. Standard pavers in the Glendale market run 60mm thick for driveways and 50mm for pedestrian paths; if yours are 50mm at the parking apron, that is a spec problem, not a joint problem.
  • Check the base course depth. For residential driveways in Glendale, we spec 4 to 6 inches of compacted Class II base, plus a geotextile separation layer on expansive clay soils. Shallow base is the number-one cause of settlement.
  • Identify the joint sand. Polymeric sand is standard, but in Glendale’s heat it can crack at the surface within a season if the joint width is under spec. Sand-dust the joints and check the width. That tells us which joint material to use on the repair.

OEM paver vs. quality aftermarket: for GAF roofing accessories the OEM is the only sensible answer because the warranty depends on the full GAF system. For pavers, we source from the same vetted brand list we use across all seven of our trades, including Belgard and Techo-Bloc, and the difference between a premium aftermarket paver and a discounted alternative is measured in freeze-thaw cycles and load rating, not brand loyalty. You’ll find the same sourcing rigor behind our KraftMaid, Cambria, and Silestone lines.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your GAF Driveway & Pavers Is Failing

  • A single paver rocks underfoot. The bedding sand has migrated out from beneath it, usually because the base below wasn’t compacted to spec. Left alone, the rocking paver cracks, and the crack spreads.
  • Joint sand washes out every rainy season. Water is getting under the surface and not draining. In Glendale, this typically points at a missing or wrong-pitch slope away from the house, not the sand itself.
  • Sunken edge course along the driveway apron. The curb-restraint or edging has shifted, letting the whole field spread. That’s a base and edge problem, and it grows every time a car drives over it.
  • Milky or chalky patches on the surface. That’s efflorescence: mineral salts drawn up through the paver by moisture in the base. It’s a symptom of a saturated subgrade, not a stain.
  • Settlement near the downspout or the drip edge. If your GAF roof drains onto the driveway, the concentrated flow cuts the base faster than general rainfall does. A properly placed drainage channel or a splash detail fixes the cause.

We hear all five of these in Glendale every month. The pattern in every case is the same: the visible failure is the symptom and the substrate is the cause.

Replacement Cost & What’s Included

Scope of work Installed price in Glendale
Paver driveway installation (full) $7,000 – $18,000
Concrete driveway installation $4,500 – $12,000
Driveway replacement $5,000 – $14,000
Driveway sealing $250 – $700
Paver patio installation $3,500 – $11,000

What moves the range: the area in square feet, the type and depth of base required by what the soil is doing, drainage corrections, and whether the existing driveway needs tear-out and haul-away. In Glendale, tear-out on a 400-square-foot concrete approach typically adds real cost because of disposal and haul distance. Every quote is a flat written price with a written scope before work starts. Parts and labor are itemized so you can see the number for the pavers and the number for the base and labor separately. No change proceeds without a signed change order, which is the discipline that has kept our projects within a few percent of the agreed price across 4,000-plus jobs. The work is covered by our 365-Day Done Right Promise: if it’s not done right, we make it right. Need a second look? Our Free Second Opinion review of any written estimate is available line by line at no charge.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

What you can safely do yourself: check for rocking pavers, sweep sand back into open joints after a storm, and inspect the slope of the driveway apron with a level to see whether water is draining toward the house. Those cost nothing and tell you a lot.

What we’d strongly discourage: pulling up pavers to re-set the base yourself. The hard part isn’t the paver – it’s the compaction, the geotextile layer, the edging restraint, and the drainage pitch, all of which must be done to spec or the settlement returns in a season or two. On a Glendale clay soil, an under-compacted base is the single most common cause of a repeat failure. We’ve been called out to fix that once before, and we don’t recommend the second attempt. If your driveway meets a GAF roof at the drip edge, there’s an additional hazard: roof runoff can hide sub-surface erosion until the failure is much bigger than it needed to be. Our technicians have up to 19 years of experience, and we’ll walk the driveway with you and show you what we see.

Read about our other vetted material partners: KraftMaid cabinets, Cambria and Silestone countertops, and our GAF roofing line. Call (844) 320-5930 to book a free estimate.

FAQs

Roofers installing a new roof with safety harnesses

Get your written price in Glendale

Call (844) 320-5930 for a free estimate on your GAF Driveway & Pavers project in Glendale. You’ll get a flat written price, a written scope, and a written warranty before a single paver is moved. Bring us a competitor’s quote and we’ll review it line by line at no charge. Our crews are background-checked and uniformed, a live person answers calls 24/7, and every visit ends with a documented photo record in your hands.

Written by the team at Rowan Construction Group Glendale, serving Glendale and nearby areas.

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A new white vinyl privacy fence with a double gateNew painted shaker cabinets with an organized deep drawerA new paver patio with a seat wall and fire pitA remodeled primary bathroom with a soaking tub and walk-in showerA single-story rear room addition with tall windows and a new patioNew double-hung windows in a dining room

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Rowan in Glendale

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Glendale team

A local vetted partner works across Glendale and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 320-5930
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Rowan Construction Group Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch