







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Glendale Homeowners Choose Dvele Construction
We provide independent Dvele construction service in Glendale, CA. That means kitchens, baths, and roofs on factory-finished modular homes, planned around how a Dvele is actually built: panelized envelope assemblies, factory-set module seams, and the mechanical, electrical, and plumbing stub-outs Dvele installs before the modules leave the plant. We’re an independent service provider, not affiliated with or authorized by Dvele. Our technicians have up to 19 years of experience, every job gets a written flat price before anyone picks up a tool, and a live person answers (844) 320-5930 around the clock.
Why Trust Rowan Construction Group Glendale for Your Dvele Construction?

Dvele isn’t tract-framed. A Dvele home arrives with its envelope already closed, its weather barrier installed, and its MEP rough-ins stubbed at the module joints. A crew that treats it like a stick-built house will cut into the wrong part of a wall and re-flash a seam they don’t understand.
Our technicians work to the assembly Dvele designed, not to habit. We match seam tapes, weather barriers, and flashing to the factory detail. We terminate the electrical and plumbing fittings the module rough-ins were designed around instead of substituting whatever’s on the shelf. When a client asks for a warranty-safe scope, we read the Dvele documents with them and write the scope so the factory envelope and the mechanical core stay intact. Kitchen, bath, and roof work is planned around where the modules meet and how the home was sealed, not where a conventional framer would expect to find a stud.
That matters in Glendale specifically. A 1920s Spanish Colonial on Adams Hill and a 2023 Dvele set on a hillside lot need completely different paperwork, different sequencing, and different trades. We write the second kind of scope for the second kind of house.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Dvele Construction Problems We Fix in Glendale
- Module-to-module and module-to-foundation seams. Factory gaskets and weather barriers can compress or get disturbed during crane set. If site flashing isn’t redone to Dvele’s detail, moisture tracks into the wall cavity. In Glendale, a damp patch near an interior wall where two modules meet usually shows up a year or two after set, and it’s almost always a failed or disturbed seam gasket plus skipped flashing.
- Factory MEP stub-outs at module joints. Rough-ins frequently need re-termination on site. Mismatched penetrations and unsealed sleeves around plumbing and conduit are a recurring source of air leakage and condensation, and they’re easy to miss because the visual finish looks fine.
- All-electric Dvele systems. Heat-pump HVAC, heat-pump water heating, and the solar-and-battery interface all land with factory labeling that site trades misread. The result is undersized circuits, mis-piped condensate, or battery and inverter clearance violations found later during an inspection.
- Post-delivery roof and envelope penetrations. Vents, skylights, and rooftop equipment added after delivery are the weak point on Dvele’s low-slope roof assemblies. Poorly flashed additions are where Glendale leaks show up first, especially after a heavy winter rain year.
- Foundation-interface settlement. Dvele homes are often set on sites that needed grading and retaining work to make the pad. When a hillside pad shifts, the failure shows at the module-to-foundation seam before anywhere else, and it looks like a leak when the real cause is movement.
Dvele Parts & Our Repair-vs-Replace Approach

For Dvele work, we match the factory-specified envelope and MEP components: compatible weather barriers, seam tapes, flashing, and the electrical and plumbing fittings the module rough-ins were designed around. Generic substitutes compromise the assembly, and we don’t put them in a Dvele wall.
We don’t claim to stock Dvele parts locally. Parts are sourced per job, verified against the module’s as-built documents and factory labeling, then ordered before the schedule is set so the crew isn’t waiting mid-scope. Repair is almost always the right call for seams, flashing, and stub-out terminations. Full replacement only makes sense when a module’s envelope or mechanical core is genuinely compromised, and we’ll show you the condition that supports either conclusion before recommending it.
If you’ve had a damp seam or a rough-in flagged on an inspection, call (844) 320-5930. We’ll review it and put the repair scope in writing.
Our Dvele Service Process – Step by Step
- 1
Diagnosis. We open the affected assembly or inspect the stated concern, photograph the condition, and identify whether the cause is a seam, a flashing detail, a stub-out, or the foundation interface. You get the photo record as a standard deliverable, not an add-on.
- 2
Written scope and flat price. The repair or install is written with a flat price, a scope, and a warranty before work starts. Under Clause 1 of the Haven Standard, that number is written before anyone picks up a tool.
- 3
Repair or install, to Dvele’s detail. Seam work is re-taped and re-sealed to the factory assembly. MEP terminations are re-done to the fittings the rough-ins were designed around. Roof penetrations are flashed to the low-slope detail, not a shingle-house shortcut.
- 4
Testing and documentation. We check air and water tightness at the joint, verify circuit sizing and condensate routing on heat-pump equipment, and photo-document the closed assembly.
- 5
Warranty and change-order discipline. No change proceeds without a signed change order, and the written warranty backs the work. The 365-Day Done Right Promise applies: if it isn’t done right, we make it right.
See the difference
Before
After
Before
After
Before
AfterDvele Products We Service & Install in Glendale

We work on the full Dvele line as it lands on a Glendale site. That includes Dvele’s self-powered modular single-family homes, with their all-electric solar-plus-battery platform; Dvele modular ADU and backyard home units; Dvele prefabricated home additions and accessory structures; and Dvele custom-configured modular home shells delivered with factory mechanical, electrical, and plumbing rough-ins.
On those homes, our Glendale work centers on full kitchen remodeling, full bathroom remodeling, and roof replacement and installation, plus the seam, flashing, and stub-out repairs that keep the envelope intact. If your Dvele is an ADU or an addition tied to a main house, we scope both sides of the tie-in so the envelope stays continuous.
We Also Service These Brands
Rowan Construction Group Glendale isn’t single-brand dependent. We also work with KraftMaid and Wellborn cabinetry, Cambria and Silestone countertops, and Kohler and Toto fixtures, among more than fifty vetted material brands. That sourcing depth is why a Dvele kitchen quote carries honest numbers: we’re comparing real material lines, not inflating one to cover the others.
FAQs – Dvele Construction Service in Glendale
No. We’re an independent Dvele service provider and we’re not affiliated with or authorized by Dvele. We work on Dvele homes because we understand how they’re built, not because the manufacturer endorses us. Call (844) 320-5930 with your address and we’ll tell you what we can scope.
We match the factory-specified envelope and MEP components, including compatible weather barriers, seam tapes, flashing, and the electrical and plumbing fittings the module rough-ins were designed around. Parts are sourced per job and verified against the module’s as-built documents. For pricing on a specific repair, call (844) 320-5930.
Seam and flashing repairs are usually a one- to two-day scope once the parts arrive. Kitchens and baths run longer and depend on the material schedule. The timeline is written into your scope before work starts, so you’re not guessing. Call (844) 320-5930 to schedule.
We cover Dvele self-powered modular single-family homes, Dvele modular ADU and backyard home units, Dvele prefabricated additions and accessory structures, and custom-configured Dvele shells with factory MEP rough-ins. If you’re not sure which you have, the as-built documents will say.
Warranty-safe work is the standard we hold, and we read the Dvele documents with you before writing the scope. Work that stays on the factory assembly and matches the specified components is designed to preserve the envelope and the mechanical core. Call (844) 320-5930 and we’ll walk through your documents.
Here are the ranges we quote in Glendale for the scopes we most often write on Dvele homes.
| Service | Glendale Price Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Bathroom Remodel | $9,000 – $28,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Roof Replacement | $8,000 – $20,000 |
| Roof Repair | $400 – $1,800 |
Call (844) 320-5930 for an exact quote. Estimates are free, and we’ll review any written estimate you already have at no charge.
Yes, if the scope stays off the module seams and the MEP terminations are handled by someone who knows the factory rough-in. We plan kitchens and baths so new penetrations are minimized and any that are unavoidable get sealed to the assembly. Call (844) 320-5930 for a written scope.
A local pro who understands Dvele’s seam detail. The fix is to open the seam, verify weather barrier and flashing continuity, re-tape and re-seal to the factory assembly, then check the MEP penetrations at that joint for air and water tightness before closing up. Call (844) 320-5930.
Yes. Dvele uses low-slope roof assemblies, and post-delivery penetrations are the weak point. Vents, skylights, and rooftop equipment need flashing to the low-slope detail, not shingle-house practice. Roof repairs typically run $400 – $1,800 in Glendale, with full replacement at $8,000 – $20,000. Call (844) 320-5930.
Usually, with the tie-in planned first. When a Dvele unit is attached to a main house, the scope has to account for both sides of the connection so the envelope stays continuous. We write that in the scope and price it flat. Call (844) 320-5930.
Ask whether they’ve worked on a panelized modular envelope, whether they’ll match the factory components, whether they carry the Dvele as-built documents, and whether they put the price in writing before starting. We do all four, plus a documented photo record on every visit. Call (844) 320-5930.
Book Your Dvele Service in Glendale, CA
Whether it’s a seam, a roof penetration, or a full kitchen or bath on your Dvele home, the first step is a written price. Call (844) 320-5930 for a free estimate anywhere in Glendale. Bring any estimate you already have and we’ll review it line by line at no charge. Estimates are free.
Written by the team at Rowan Construction Group Glendale.












