







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Bathroom Remodeling: The Glendale Owner’s Guide
We install CGI-compatible bathroom remodeling in Glendale, and a full bathroom remodel with CGI-spec fixtures and finishes typically runs $9,000 – $28,000 installed. When we’re called about a failing CGI-part bathroom, it’s almost always the same story: a shower valve that drips after two years, a vanity top that’s started to craze near the faucet, or a tile membrane letting go behind the surround. The homeowner thinks one part failed. Usually the water behind it has been working on something else too. We quote a flat written price before any work starts, document what we find with photos, and only replace the pieces that have actually failed – not the whole room because it’s easier to sell.
Which CGI Models This Applies To

CGI is the brand most Glendale homeowners meet through builder-grade bath packages: a standard 60-inch alcove tub, a pressure-balanced tub/shower valve, a porcelain vanity top, and a resin or acrylic surround. The model and series number live on a sticker inside the cabinet door or under the sink on the vanity, and on a brass tag on the valve body behind the trim plate. Pull those numbers before you call anyone. One gotcha we see often: CGI changed trim-plate openings on its mid-line valve series around the time its low-arc series was discontinued, so a replacement trim kit that came from the right brand can still be the wrong generation. The other is the vanity top – a CGI drop-in basin built for a 22-inch-deep cabinet won’t seat on a 21-inch Euro-style box, and the hole pattern won’t line up either way.
On OEM versus aftermarket: for the valve, we recommend the original CGI part or a branded equivalent (Kohler or Toto cartridges cross-reference cleanly to most CGI mid-line bodies). On vanity tops and surrounds, quality aftermarket is fine and often better – Cambria or Silestone quartz in place of the CGI cultured-marble top is a spec upgrade, not a downgrade. We carry a sourcing list of fifty-plus vetted brands, including KraftMaid, Cambria and Silestone, so the written quote reflects real part numbers at honest prices rather than a padded allowance.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CGI Bathroom Remodeling Is Failing
Five symptoms we see on Glendale callbacks, and what each usually means:
- The shower valve drips or runs warm on cold – the cartridge seal has hardened or the pressure-balance spool is sticking. Two years on a CGI builder valve in Glendale’s hard water is not unusual; the mineral load eats rubber faster here than in softer-water markets.
- The vanity top has a hairline crack radiating from the faucet hole – stress from an over-tightened mounting nut on a cultured-marble or resin top. Once the crack runs, water reaches the cabinet substrate and the deck swells.
- Grout or caulk at the tub/shower junction keeps failing – movement between the tub apron and the surround, often because the surround panels were set on drywall rather than a waterproof backer. No amount of re-caulking fixes a wet substrate behind it.
- Tile feels hollow or lifts at a corner – the thin-set or membrane has debonded. In Glendale, a bathroom that sat through a hot summer with a poorly vented fan will show this within one season.
- Water stains on the ceiling below the bathroom – the drain or overflow gasket on the CGI tub has failed, or the valve body is seeping at a solder joint. Stop using the fixture and call us; this one escalates.
Replacement Cost & What’s Included

Installed prices in Glendale for CGI-part bathroom work, quoted before any tool comes out of the truck:
| Scope | Installed Price Range |
|---|---|
| Full bathroom remodel (CGI-spec fixtures & finishes) | $9,000 – $28,000 |
| Small bathroom remodel | $5,000 – $12,000 |
| Shower replacement | $3,000 – $8,500 |
| Walk-in shower installation | $4,500 – $12,000 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Bathroom vanity installation | $800 – $3,000 |
What drives the range: whether the valve body has to be opened up in the wall, whether the surround sits on water-damaged backer, and whether we’re matching a CGI part or upgrading to a quartz top. Under Clause 1 of The Haven Standard, the price is written with a line-item scope and a written warranty before work starts. No change proceeds without a signed change order – which is why our projects land within a few percent of the number you agreed to. The 365-Day Done Right Promise covers the install for a full year.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely handle a few checks yourself: read the model sticker on the valve and vanity, photograph the crack or stain, and confirm whether the drip is from the spout or the trim plate. That information saves time on the quote. Where DIY goes wrong with bathroom parts is almost always behind the wall – a pressure-balance valve contains a cartridge under spring tension that can release hot water suddenly if opened without shutting the supply and draining the line, and a valve body that’s seeping at a solder joint needs a torch, a permit for the rough-in in most Glendale cases, and a leak test before the wall closes. Re-tiling a shower without a proper waterproof membrane is the other one – it looks fine for six months, then the framing gets wet. Call (844) 320-5930 for a free second opinion on any written estimate, or to have us quote the work. We’re an independent service provider, not affiliated with CGI.
FAQs

A CGI builder-grade shower valve cartridge typically lasts 2 – 5 years in Glendale’s water, and a cultured-marble vanity top runs 10 – 15 years before cracking if it wasn’t over-tightened at install. The surrounding waterproofing, not the visible part, is what determines how long the whole assembly holds. Call (844) 320-5930 for a free estimate on replacing yours – we’ll tell you what actually failed.
Often yes – a drip is usually a $40 cartridge swap, and re-caulking a tub junction costs a fraction of a surround replacement, if the backer underneath is dry. It’s when water has reached the substrate or framing that repair stops being the honest answer. We give you a written price both ways so you can see the difference.
Most single-part swaps (valve cartridge, vanity top, surround panel) run one day, sometimes two if the wall has to open and close. A full bathroom remodel is typically two to four weeks in Glendale, depending on permit turnaround and whether the tile layout needs changing. The written quote gives you the schedule before we start.
We match by model and series number, not by photo, then quote either the OEM CGI part or a branded equivalent with the same footprint. Our sourcing runs across fifty-plus vetted brands – KraftMaid, Cambria, Silestone, Kohler, Toto – so we can price a like-for-like replacement or an upgrade on the same written quote. Call (844) 320-5930 for an exact quote; estimates are free.
Written by the team at Rowan Construction Group Glendale, serving Glendale and nearby areas.
Get a Written Price Before Any Work Starts
If a CGI part in your Glendale bathroom has failed or you’re planning a remodel, call (844) 320-5930 for a free estimate. Every visit includes a documented photo record, every project starts with a flat written price and written scope, and the 365-Day Done Right Promise back it up.












