A Rowan company - serving Glendale, CA
A new rear addition with a vaulted beamed ceiling and tall windows
Boxabl · Glendale

Boxabl Home Additions & ADU in Glendale, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Glendale
A finished backyard cottage with a small covered porch
A single-story rear room addition with tall windows and a new patio
A new paver patio with a seat wall and fire pit
A remodeled primary bathroom with a soaking tub and walk-in shower
A new clay tile roof
New double-hung windows in a dining room
A new front yard fence with a matching gate
A new paver pool deck
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Boxabl Home Additions & ADU: The Glendale Owner’s Guide

We install Boxabl-compatible home additions and ADUs in Glendale, and the installed price typically runs $45,000 – $130,000 depending on whether you’re tying a Casita module into an existing lot or building a full accessory dwelling unit with its own utility runs. Rowan Construction Group Glendale is an independent service provider and is not affiliated with Boxabl. Most owners don’t start by searching for a contractor; they start by noticing something off. A panel seam that wasn’t tight at delivery starts whistling in the Santa Ana winds. The steel chassis shows surface rust after a wet winter in the Verdugo Wash corridor. Or the factory finish around a window opening begins to chalk and lift after two summers of Glendale’s inland heat.

Call (844) 320-5930

Which Boxabl Models This Applies To

A remodeled family room with new windows and a window seat

Boxabl’s Casita is the unit most Glendale owners are working with, and it’s the platform its additions and ADU tie-ins are built around. The key spec to know: the Casita ships folded at roughly 8.5 feet wide and unfolds to about 19 feet by 19 feet, so any addition that connects to it – a kitchen bump-out, a bathroom module, a covered breezeway – has to be engineered around that footprint and the steel chassis underneath. We identify the right mounting points and finish panels by the delivery documentation and the stamped plate inside the unit, not by eyeballing. Measurements matter more here than on a stick-built house: the Casita’s wall panels are factory-set, and a bracket drilled in the wrong spot compromises the fold structure.

OEM versus aftermarket is a real decision for Boxabl specifically. Factory finish panels and chassis hardware match the delivered tolerances, but lead times can stretch. Quality aftermarket equivalents for cladding, fasteners, and finish systems are generally available and, in Glendale’s climate, often outperform the factory spec for UV and salt-air exposure. We quote both and let the price sheet explain the difference.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Boxabl Home Additions & ADU Is Failing

  • Whistling or drafts at panel seams. The seam gasket or fastener has loosened, and wind is finding the gap. Glendale’s seasonal wind events push this from a nuisance to a real envelope problem fast.
  • Surface rust on the chassis or anchor points. The steel frame isn’t weatherproof forever, especially near the Verdugo Wash where humidity sits higher. Left alone, rust creeps toward the structural members that hold the unit level.
  • Chalking or peeling finish around windows and doors. The factory finish takes UV hard in Glendale’s inland heat. Once it chalks, water gets behind it and the substrate starts to move.
  • Uneven floors or doors that stick. The unit has settled on its foundation or the leveling hardware has shifted. This one is a structural symptom, not a cosmetic one.
  • Roof-edge water intrusion after rain. Flashing and trim details at the fold line are the first to fail, and Glendale’s wet-season storms are the test.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

For a Boxabl-compatible home addition or ADU scope in Glendale, installed pricing runs $45,000 – $130,000. What drives the range is how much of the work is a module tie-in versus a full utility build-out: a covered addition that connects to the Casita sits near the low end; a standalone ADU with its own electrical panel, plumbing rough-in, foundation, and permitted occupancy sits toward the high end. The number is itemized – parts, labor, permits, and disposal each written separately, no lump-sum guessing. Under Clause 1 of The Haven Standard, the price is written before anyone picks up a tool, and no change proceeds without your signed change order. Workmanship is covered by our 365-Day Done Right Promise: if it’s not done right, we make it right.

DIY or Call Us?

You can safely document what you’re seeing: photograph the seam, measure the rust spread on the chassis, note where a door rubs. That record is genuinely useful and we’ll ask for it. Where it goes wrong is the chassis and the fold structure. The Casita’s steel frame carries the unit’s weight and its leveling hardware; adjusting an anchor or a panel bracket without the load properly supported can compromise the fold geometry, and correcting that is far more expensive than the original install. Electrical tie-ins and plumbing rough-in for the addition are the other places to stop. Call us at (844) 320-5930 for a free estimate, and bring any estimate you’ve already had – our Free Second Opinion reviews it line by line at no charge.

FAQs

A framer checking new wall framing on a home addition

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A new bay window with a cushioned seatA new wood side gate with black hardwareA new concrete driveway with a paver borderA stone counter, tile backsplash and open shelf after a kitchen remodelA remodeled hall bathroom with subway tile and a floating vanityNew architectural shingles with a clean valley

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Rowan in Glendale

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Glendale team

A local vetted partner works across Glendale and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 320-5930
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Rowan Construction Group Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch