







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boxabl Bathroom Remodeling: The Glendale Owner’s Guide
Boxabl-compatible bathroom remodeling in Glendale runs $9,000 – $28,000 installed, a full small bathroom remodel runs $5,000 – $12,000, and we deliver a written flat price before any work starts, not a “call for a quote.” The price is fixed in writing, with a written scope and warranty attached, so you know what leaves your account before a single fixture is unboxed.
Most Glendale owners don’t discover a problem with the bathroom until the symptom is already loud. A shower pan flexes underfoot in a Casita, a vanity cabinet delaminates at the toe kick, or a fan runs but a mirror fogs within a minute of the hot water going on. The Casita’s wet core is off-site factory work, so the fix is almost never “swap one part.” It’s matching Boxabl’s dimensions and plumbing stub-outs to the right fixtures. This guide is written for owners in Glendale who need the number in dollars before anyone picks up a tool, and the trade vocabulary explained in the same sentence.
Key Takeaways
- A bathroom remodel for a Boxabl unit in Glendale runs $9,000 – $28,000; small bathrooms start at $5,000.
- Compatibility isn’t plug-and-play. Boxabl stub-out spacing, drain rough-in, and pan dimensions are model-specific and must be verified before parts are ordered.
- Before/after photo records are a standard deliverable on every visit, not an add-on.
Which Boxabl Models This Applies To

Boxabl’s Casita line has been built in more than one iteration, and the dimensions that matter to a bathroom remodel (vanity width, toilet rough-in, shower pan footprint, drain location, fan duct path) have shifted between production runs. So the part that fits one Casita may not fit another. Ask for the exact measurement from the unit itself, not from the brochure. The label on the unit’s data plate is a good starting point, but a tape measure on the actual vanity opening and drain is the check we can actually trust.
The OEM-vs-aftermarket call for a Boxabl bathroom breaks three ways. OEM parts reproduce the original dimensions exactly, which matters when the unit was built to a tight tolerance and the existing shower pan is 60 inches. Aftermarket equivalents from a brand like Kohler or Toto often cost less and sometimes perform better, but only after the rough-in is measured. A hybrid, an OEM pan with an aftermarket faucet and vanity, is common, sensible, and usually the best value. Our written quote itemizes which parts are OEM, which are aftermarket, and the spec for each, so you can compare line by line.
Rowan Construction Group Glendale is an independent service provider and is not affiliated with Boxabl. The trademark is used here to describe the unit the work is being done on, and to distinguish OEM components from aftermarket equivalents. If a spec sheet is on the units’ data plate, we’ll read it. If it isn’t, we’ll measure. Either way, the number goes in writing before work starts.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boxabl Bathroom Remodeling Is Failing
Five symptoms come up most often on Boxabl bathrooms we look at in Glendale, and each one points at a specific cause worth naming.
- Flex or soft spots in the shower pan. Usually the shower pan substrate or cement board is failing under the liner, or a factory seam has opened. If the floor gives when you step near the drain, stop using that shower until someone inspects it. A pan failure can leak into the subfloor before it’s visible from inside.
- A toilet that rocks or shows a stain at the base ring. The closet flange or wax ring has failed, and water has likely begun to reach the subfloor. The fix is often a flange repair plus a new ring, not a new toilet, but that’s determined after the toilet is pulled and the subfloor is checked.
- A vanity cabinet that delaminates or swells at the toe kick. Moisture is reaching the particleboard from a slow leak under the sink or from a poorly sealed wall joint. KraftMaid and similar cabinets hold up better when the leak source is fixed first.
- A bath fan that runs but the mirror still fogs within a minute. The fan duct is disconnected, undersized, or venting into the attic instead of outside. In Glendale’s warm, dry summers the moisture doesn’t get pushed out fast, and the wood subfloor pays for it.
- Cracked or stained caulk at the shower wall joints. Often the original caulk was applied over an unsettled backer, and it opened up as the unit moved. Recauking alone rarely holds. What holds is fixing the joint behind it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

In Glendale, a full bathroom remodel for a Boxabl unit runs $9,000 – $28,000. A small bathroom remodel runs $5,000 – $12,000. A walk-in shower install runs $4,500 – $12,000, a tub-to-shower conversion runs $3,500 – $10,000, and a shower replacement alone runs $3,000 – $8,500. A vanity installation runs $800 – $3,000. Those ranges are installed, not just parts.
What drives the range: which parts are OEM vs aftermarket, whether the rough-in has to be moved, the shower pan and drain configuration, and finish level (a Cambria or Silestone counter and a Kohler or Toto fixture sit at the higher end). Under Clause 1 of the Haven Standard, the price is written before anyone starts, with a written scope and a written warranty, and no change proceeds without a signed change order. That’s the discipline that keeps a project near the agreed number. The 365-Day Done Right Promise covers the work: if it isn’t done right, we make it right. Every visit includes a documented photo record as a standard deliverable. Free second opinion on any written estimate is available if you have a competing quote.
DIY or Call Us?
An owner can safely check three things without tools. Look under the sink for staining at the cabinet base. Confirm the fan actually pulls air when the door is closed. And measure the vanity opening, drain center, and pan footprint with a tape measure so the right part gets ordered.
Where DIY goes wrong is the water side. Pulling a toilet to replace a wax ring looks simple until the flange is cracked or the subfloor is soft. Replacing a shower pan looks simple until the liner, curb, and drain are out of alignment. Setting a new vanity looks simple until the rough-in spacing doesn’t match the original. Those mistakes are cheap to avoid and expensive to clean up. A licensed contractor with backup in the trade can’t fix them for free either, but can present a written price before any work begins and share a documented photo record of what was found.
The plumber and the tile setter are doing this work under a separate contract. If the fixture is a Kohler or Toto model installed on an original Boxabl rough-in, our technicians confirm the fit before the price is written. Call (844) 320-5930 to schedule a free estimate. At the same time, the written scope goes in writing before the first tool is unpacked.
Frequently Asked Questions

A bathroom in a Boxabl unit in Glendale typically needs the first significant attention around the 5 – 10 year mark, often sooner on a shower pan or fan that was installed to tight tolerances. The 365-Day Done Right Promise covers work we do: if it isn’t done right, we make it right.
Yes, for some failures. A rocking toilet usually needs a flange repair and wax ring, not a new toilet, and a fogged mirror usually needs the fan duct repaired rather than a new fan. A soft shower pan is different: the pan itself usually goes, and the decision is between a pan replacement and a full shower redo. A written price covers both options so you can compare before you choose. Call (844) 320-5930 for a free second opinion on any written estimate.
A shower replacement typically takes 1 – 2 days. A tub-to-shower conversion typically takes 2 – 3 days. A full bathroom remodel typically takes 1 – 3 weeks depending on tile work and whether the rough-in has to move. The schedule goes in writing with the price, and any change after that is signed before work continues.
First we measure the actual unit. The rough-in, drain, and pan footprint are the dims that decide which part fits, and they come from the unit, not the brochure. Once we have those, we price OEM and aftermarket equivalents side by side. A written quote itemizes which is which and the spec for each, so you can check the line items against your own photos. If the part isn’t in the quote, we note it and you decide.
Free estimates are available across Glendale, including the neighborhoods around Adams Hill, Rossmoyne, and the Chevy Chase canyon. We also work with KraftMaid, Cambria, and Silestone finishes in bathroom remodels, windows and doors, roofing, driveways, and additions. Call (844) 320-5930 for a free estimate. The number is written before work starts, and the 365-Day Done Right Promise and the Haven Standard back the result.
Written by the team at Rowan Construction Group Glendale, serving Glendale and nearby areas.












