A Rowan company - serving Glendale, CA
A remodeled kitchen with a wood island, painted cabinets and a plaster range hood
Boral · Glendale

Boral Kitchen Remodeling in Glendale, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Glendale
A stone counter, tile backsplash and open shelf after a kitchen remodel
New painted shaker cabinets with an organized deep drawer
A remodeled kitchen with a waterfall island and wood cabinets
A new front entry door with glass sidelights
A new black aluminum pool fence with a gate
A new curved paver walkway to the front porch
A walk-in shower with large-format tile and a built-in niche
A remodeled family room with new windows and a window seat
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Boral Kitchen Remodeling: The Glendale Owner’s Guide

We install Boral-specified kitchen remodeling in Glendale, and most full kitchen projects here land between $14,000 and $45,000 installed, with the finish-adjacent pieces priced separately. If you’ve landed on this page, you usually didn’t arrive by searching for a remodel. You arrived because something on a Boral-finished kitchen failed: a caulk line at the backsplash that keeps opening, a grout joint cracking along a countertop seam, a tile edge that’s lifted near the range. Those small failures are how most Glendale owners discover that the material under the finish matters as much as the finish itself. We quote a flat written price before anyone starts, and we’ll tell you plainly whether you’re looking at a repair, a partial redo, or a full remodel.

Call (844) 320-5930

Key Takeaways

  • Boral’s kitchen-relevant lines are tile and trim, not cabinets or countertops: think backsplash tile, floor tile, and the trim profiles that frame them.
  • Glendale kitchens in older housing stock (1920s bungalows through 1980s condos) often hide a substrate problem under a sound-looking tile face.
  • We’re an independent contractor, not affiliated with Boral, and we source Boral-compatible material through vetted suppliers with written documentation.
  • Every quote is flat and written, no work proceeds on a change without your signed change order, and the 365-Day Done Right Promise covers the workmanship.

Which Boral Models This Applies To

Installers leveling a new base cabinet during a kitchen remodel

Boral doesn’t make kitchen cabinets, so the “model” question here is really about which Boral tile and trim line sits in your kitchen. Boral’s residential tile lines include series sold under names like Boral Cinza and the Sundance and Muscat collections, plus stone-look porcelain lines that carry a series name and a color code on the carton. Your first identifying step is the original purchase paperwork or a leftover carton in the garage. Failing that, pull the actual dimensions: Boral tile series commonly run in nominal field sizes like 12×24, 13×13, or 18×18, and the exact millimeter measurement (not the trade inch label) is what matches you to the right replacement stock.

Where Boral differs from generic tile is in the trim: bullnose, cove base, and chair-rail profiles are cut to the specific series body, so a 12×24 field tile from one Boral line won’t necessarily accept the trim from another. That’s the compatibility gotcha that trips owners up when they try to match a single cracked piece from a big-box shelf. We’ll pull the series code, confirm the body color and coefficient of friction if it’s a floor application, and write the exact specification into the quote. The OEM-versus-aftermarket call is simpler than it sounds: if the exact Boral series is discontinued, a quality domestic porcelain in the same size and body tone will bond cleanly to a properly prepped substrate, and we’ll say so in writing rather than upselling you into a full re-tile you don’t need.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Boral Kitchen Remodeling Is Failing

  • Hairline cracks running along a countertop-to-backsplash seam. That joint is a movement joint, and the crack usually means the caulk has failed rather than the tile, or the substrate behind it has shifted under a heavy countertop.
  • Grout that crumbles when you drag a fingernail across it. Soft, powdery grout means either an uncured or under-mixed batch, or moisture migrating up from a substrate that never dried before the tile went down.
  • Lippage you can feel underfoot. A raised tile edge means the thin-set was applied unevenly or the substrate wasn’t leveled; it gets worse with foot traffic, not better.
  • A hollow thud when you tap a field tile. That’s a bond failure between tile and thin-set, and it’s the classic precursor to a tile popping loose, most often near the dishwasher or sink where moisture sits.
  • Dark staining spreading from a floor register or baseboard. Water has found a path behind the wall or under the floor, and it will reach the tile assembly eventually; this one gets a moisture reading before anything else.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A new paver pool deck

Around Glendale, a Boral-compatible backsplash installation runs $800 to $2,500, and a partial re-tile of a kitchen floor typically falls within a cabinet installation range of $4,000 to $13,000 once demolition, substrate repair, and disposal are included. A full kitchen remodel sits between $14,000 and $45,000, and a small kitchen between $9,000 and $20,000. The range is driven by three things: how much substrate repair the demo exposes, whether the existing drywall or backer board can stay, and the finish level you choose.

Our price is parts plus labor, itemized, with the tile, thin-set, trim, and disposal line items named in writing before work starts. If the demo reveals a problem that changes scope, that change is quoted and signed before anyone touches a tool. The 365-Day Done Right Promise applies to the workmanship: if a joint opens or a tile lifts within the year, we make it right. We’re happy to review a competitor’s written estimate line by line at no charge if you want a second opinion on the number.

DIY or Call Us?

You can safely check three things yourself: tap each field tile with a plastic-handle tool and listen for hollow spots, press a fingernail into grout to see if it’s soft, and look under the sink for a moisture stain on the cabinet base. What you shouldn’t do is fix a substrate problem yourself. Removing a single tile to inspect what’s behind it is how a small repair becomes a cracked neighboring tile and a failed waterproofing layer, and if the tile sits over any electrical wiring near an outlet, a careless demo is a genuine hazard. Tile work over a wet kitchen substrate also tends to fail twice if the moisture source isn’t diagnosed first. That’s the point where a trained crew earns its keep. Call (844) 320-5930 for a free estimate, and we’ll tell you in writing whether it’s a repair or a redo.

FAQs

A freestanding soaking tub in a remodeled primary bathroom

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A second-story addition that matches the existing rooflineA newly finished roof with a ridge vent and step flashingA standing-seam metal roof over a covered porchA new bay window with a cushioned seatA new wood side gate with black hardwareA new concrete driveway with a paver border

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Rowan in Glendale

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Glendale team

A local vetted partner works across Glendale and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 320-5930
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Rowan Construction Group Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch