







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Bathroom Remodeling: The Glendale Owner’s Guide
Boral bathroom remodeling in Glendale typically runs $9,000 – $28,000 installed, depending on whether you’re refacing a single wet wall or rebuilding the full room, and a small bathroom can land closer to $5,000 – $12,000. Boral makes a range of bathroom-facing products (tile, engineered stone, and trim systems), and we install and replace them for Glendale homeowners who want a straight number before the first box is opened. We’re an independent contractor, not affiliated with Boral, and we quote parts and labor as one written, flat price.
Most owners don’t realize a Boral bathroom surface has started to go until something gives: a tile that sounds hollow when tapped, a grout line at the floor that keeps turning dark, or a shower wall that flexes slightly under a hand. The failing part usually isn’t the tile face. It’s the layer underneath it – the membrane, the backer, or the setting bed – and that’s the part worth pricing honestly before the cosmetic fix turns into a rebuild.
Key Takeaways
- Installed Boral bathroom remodeling in Glendale runs $9,000 – $28,000; small baths $5,000 – $12,000.
- The failing part is almost always what’s under the Boral surface, not the surface itself.
- We name the price range in writing before work starts, and no change proceeds without a signed change order.
- A hollow tile or flexing wall is a substrate signal, not a cosmetic one – it’s worth a look before you retile.
Which Boral Models This Applies To

Boral’s bathroom-facing catalog is mostly on the surfaces side: porcelain and ceramic tile lines, engineered stone slabs and vanity tops, and trim profiles that sit over tub and shower surrounds. The part you’re replacing depends on which surface family is in the room, and Boral doesn’t make a single universal backer or membrane – so a “Boral part” is usually one of these three things: a matching tile run for a repair, an engineered-stone vanity top or slab section, or a trim/edge profile that finishes the edge of the install.
To identify what you actually have, look in three places before buying anything. First, check any leftover box or crate in the garage – Boral prints the product family, color name, and nominal size on the carton label, and that label is the cleanest match you’ll get. Second, measure the finished surface precisely – engineered stone tops are commonly sized in whole-inch and half-inch dimensions, and trim profiles vary by depth, so a tape measure on the actual piece beats a guess from a photo. Third, look at the edge profile and the color name on the label, because Boral’s engineered stone lines are color-matched by name and lot, and a mismatch on a partial repair will show under Glendale’s afternoon light.
OEM vs aftermarket for Boral is a real decision. An OEM Boral replacement keeps the color, size, and edge consistent with what’s already in the room – the right call for a partial repair where two pieces will sit side by side. A quality aftermarket equivalent can be the honest choice when the repair is a full wall or full surround, because the visual seam problem disappears and the material cost drops. We price both and say which one makes sense for your room, in writing, before anything ships.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Bathroom Remodeling Is Failing
Glendale’s older housing stock – a lot of it built between the 1920s and the 1960s, with its share of 1980s and 1990s condos closer to Brand and the Galleria – means we see a specific set of failures in this city. Bathroom surfaces here live with hard water and a hot, dry summer followed by winter rain, and both work on the layer under the Boral face.
- A tile that sounds hollow when tapped. Hollow sound means the setting bed has debonded from the backer – usually moisture working in from a failed grout line or a shower pan that’s been weeping for a season. The tile face is fine; the bond behind it isn’t.
- Grout that keeps darkening after cleaning. Discoloration that returns within weeks means water is still moving under the surface. On a shower wall or floor, that’s a membrane question, not a cleaning question.
- A shower wall that flexes under hand pressure. Flex means the backer or substrate has lost integrity, often from a long, slow leak. Engineered stone and tile on a flexing backer will crack eventually, no matter how good the surface is.
- Caulk and sealant joints that keep failing at the tub or floor transition. Movement at the joint plus a wet substrate is the classic combination – and it’s the reason a cosmetic recaulk buys a few months, not a fix.
- Vanity top or edge trim separating from the cabinet or wall. Usually a moisture or movement issue at the connection point, and often the first sign that the Boral piece needs remeasuring and re-setting, not just re-gluing.
In Glendale we regularly see the vanity-top and shower-wall failures cluster in condos and mid-century houses where the original waterproofing is decades old and was never brought up to current standards. The Boral surface was doing its job. The layer under it wasn’t.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

A Boral bathroom remodeling replacement in Glendale runs $9,000 – $28,000 for a full bath, and $5,000 – $12,000 for a small bathroom. A single-item replacement is priced by what’s actually being swapped, and these are the exact ranges we quote for the common parts:
- Walk-in shower install: $4,500 – $12,000
- Tub-to-shower conversion: $3,500 – $10,000
- Shower replacement (surround and pan): $3,000 – $8,500
- Vanity installation, including a Boral stone top: $800 – $3,000
What drives the range: the size of the wet area, whether the membrane and backer are being replaced or are sound, the Boral surface family and edge profile you choose, and whether plumbing or framing has to move. We quote parts and labor as a flat written price with a written scope – not a “call for a quote,” and not a labor-only number with a materials asterisk. Every visit includes a documented photo record of what we found and what we did, and every install carries the 365-Day Done Right Promise: if it isn’t done right, we make it right, backed by the Haven Standard rather than a handshake.
DIY or Call Us?
There’s a safe middle ground here, and it’s worth naming clearly. You can check the carton label for the Boral product family and color, measure the finished surface, tap a few tiles to listen for hollow sounds, and photograph the failing joint – all of that is useful information for a quote, and none of it puts you at risk.
Where DIY goes wrong with bathroom surfaces: pulling a tile to “see what’s behind it” often takes the surrounding pieces with it, and it can break the waterproofing seal on a shower wall if the membrane is already marginal. On a wet wall rebuild, the failure isn’t usually the tile-setting itself. It’s the waterproofing detail – the pan, the curb, the membrane lap – and those are the parts that don’t announce their failure until months later. That’s why a tile or stone replacement reads as an easy job and finishes as a full rebuild. If the wall flexes or the pan is wet, stop and have it looked at. Call (844) 320-5930 and we’ll give you a written price before any work starts – and a free second opinion on any written estimate you already have.
FAQs

The Boral surface itself is durable – porcelain and engineered stone routinely last decades – but the lifespan you feel is the waterproofing behind it, and in Glendale’s older homes that layer is the one that fails first. A surface installed over a sound membrane will outlast a beautiful install over a marginal one, so the condition of the substrate matters more than the product name on the carton.
Often yes, when the failure is cosmetic – a cracked tile, a separated edge trim, a vanity top needing reset. Partial tile repairs are viable only if you can still source matching Boral color and lot, which is exactly why we check the carton label before ordering; if you can’t match it, a full-surface replacement is the honest recommendation rather than a mismatched patch. Call (844) 320-5930 for a written price on either path – the second opinion is free.
A single surface swap (vanity top, tub surround, or shower replacement without plumbing changes) is typically a short job measured in days, not weeks, once the material is on hand – but substrate repair extends it. A full bathroom remodeling rebuild is a longer schedule because the membrane and backer have to cure before the surface goes down. We put the timeline in the written scope so you’re not guessing. Call (844) 320-5930 to schedule your free estimate.
We source through vetted distributors and match the Boral product family and color from your carton label or a physical sample – OEM when a partial repair needs a visual match, a quality aftermarket equivalent when the full surface is being replaced and the color-match problem goes away. We also handle KraftMaid, Cambria, and Silestone for the surrounding bathroom work if that’s what the room calls for. The part is named and priced in the written quote before it’s ordered. Call (844) 320-5930 to schedule your free estimate.
Boral bathroom remodeling in Glendale comes down to one question asked early: what’s under the surface, and what will it cost to make it right? We quote that answer as a flat written price before any work starts, back it with the 365-Day Done Right Promise, and include a documented photo record on every visit so you have the evidence in hand. Our technicians have up to 19 years of experience across bathroom remodeling, and every crew member is background-checked and uniformed. Call (844) 320-5930 for a free estimate and a written scope of work – and if you already have a competitor’s quote, bring it. We’ll review it line by line at no charge.
Written by the team at Rowan Construction Group Glendale, serving Glendale and nearby areas.












