







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Belgard Kitchen Remodeling: The Glendale Owner’s Guide
If you’re comparing kitchen remodeling quotes in Glendale, expect $14,000 – $45,000 installed for a full kitchen remodel, with most Belgard-coordinated projects landing in the middle of that band once layout, cabinetry, and finishes are locked in. A written, line-item price comes before any work starts – not after demolition. Owners usually find us after a renovation elsewhere in the house went sideways: the countertop templated wrong, the cabinet boxes out of square, the backsplash lippage that shows up two weeks after the grout cures.
We work alongside Belgard hardscape materials and surface products as one piece of a kitchen scope, and we treat every kitchen the same way: documented findings, signed change orders, and a written warranty before a single cabinet comes off the wall. Rowan Construction Group Glendale is an independent service provider, not affiliated with Belgard.
Key takeaways:
- Full kitchen remodel in Glendale: $14,000 – $45,000 installed
- Every price written before work begins, no exceptions
- Photo record on every visit, included as standard
- 365-Day Done Right Promise on all labor
Which Belgard Models This Applies To

Belgard hardscape and surface products carry model and color codes on the banding or the back of the pallet label – look for a series name (Dimensions, Catalina, Urbana) followed by a color descriptor and a batch number. For kitchen applications where Belgard material shows up as flooring transitions, thresholds, or exterior-adjacent patio-to-kitchen tie-ins, the model match matters more than most homeowners expect. A slightly different series from the same color family will read visibly different under kitchen lighting, especially in the warm 2700K – 3000K range common in Glendale homes.
Measure the actual piece, not the spec sheet. Fired and cast products drift by a few millimeters between batches, and a 12mm drift on a threshold is a visible gap once it’s set. If you’re matching an existing Belgard floor to a new kitchen transition, bring a physical sample and the batch number to the consult. Aftermarket equivalents exist and often cost 20 – 30% less, but the color and texture match is where they fail. We source through fifty-plus vetted brands including Belgard, and the written quote shows exactly which line item is OEM and which is an approved equivalent – so you decide, not us.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Belgard Kitchen Remodeling Is Failing
- Separation at the floor transition. Usually a substrate movement issue under the threshold, not the Belgard piece itself. Left alone, it widens through seasonal swings and starts catching toes and chair legs.
- Hairline cracks radiating from a corner cut. Common when a piece was cut with a dry blade and the edge micro-fractured. Cosmetic for months, structural once moisture gets into the fracture.
- Grout lines darkening unevenly. Efflorescence or trapped moisture under the tile field. In Glendale’s dry climate this often means a failed moisture barrier, not surface dirt.
- Lippage over 1mm between adjacent pieces. A layout and setting error, visible under raking light. Cosmetic now, a trip hazard later.
- Loose cabinets pulling away from the countertop. Not a Belgard failure, but it’s the failure that ruins a Belgard countertop and backsplash in one go – the counter follows the cabinet, and the backsplash cracks at the seam.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Belgard-coordinated kitchen scope in Glendale sits inside our standard published ranges, and we quote each line separately so you can see exactly where your money lands:
- Full kitchen remodel: $14,000 – $45,000
- Small kitchen remodel: $9,000 – $20,000
- Cabinet installation: $4,000 – $13,000
- Countertop installation: $2,000 – $6,500
- Backsplash installation: $800 – $2,500
- Kitchen island installation: $3,000 – $10,000
What drives the range: cabinet line (KraftMaid and Wellborn both run in the middle to upper band), square footage of Belgard surface area, whether plumbing or electrical moves, and substrate condition under the old floor. The written quote shows parts and labor as separate lines – you see what the material costs and what the install costs. Labor is covered by the 365-Day Done Right Promise. Permits, if the scope requires them, are listed in the quote and pulled before work starts.
DIY or Call Us?
You can safely check three things yourself: whether the Belgard batch number matches across your existing pieces, whether the cabinet boxes are plumb (a 4-foot level on two faces), and whether the current floor transition moves when you press on it. What goes wrong in DIY: substrate prep. A Belgard piece set on an uneven or unsealed substrate fails within a season in Glendale’s temperature swings, and the failure isn’t the piece – it’s the bed underneath. Setting materials, uncoupling membranes, and moisture barriers aren’t a weekend job, and a failed install costs more to correct than a professional install costs to do right the first time.
Call (844) 320-5930 for a free written estimate. Bring a competitor’s quote if you have one – our Free Second Opinion reviews it line by line at no charge.
FAQs

A properly installed Belgard surface in a Glendale kitchen lasts 20 – 30 years with routine maintenance; the failure points are the substrate and the setting materials, not the Belgard piece. Glendale’s dry summers and cool winters are mild on the material compared to coastal humidity, which works in your favor when the bed is prepped correctly. Call (844) 320-5930 for an exact quote on your scope.
Often yes, if the failure is cosmetic (grout darkening, single-piece cracking) and the substrate is intact – a repair runs far less than a full scope. If the substrate has moved or the cabinets have pulled, replacement is the honest answer. We’ll tell you which one you’re facing after a documented inspection. Estimates are free.
A Belgard surface swap with no substrate work is typically 2 – 4 days; a full kitchen scope runs 3 – 6 weeks depending on cabinet lead times and whether plumbing or electrical moves. The written scope states the timeline before work begins, so you’re not guessing mid-project. Call (844) 320-5930 to schedule your free estimate.
Through our vetted supplier network, matching series and batch where the existing install requires an exact visual match, and proposing an approved equivalent where it doesn’t. Every quote shows the source line by line. We don’t claim stock – we source to your spec and confirm availability before the written price goes out. Call (844) 320-5930 to start.
Written by the team at Rowan Construction Group Glendale, serving Glendale and nearby areas.












