







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Belgard Bathroom Remodeling: The Glendale Owner’s Guide
If you’re researching Belgard bathroom remodeling in Glendale, here’s the practical answer: a full bathroom remodel runs $9,000 – $28,000 installed, and a smaller bath lands in the $5,000 – $12,000 range. We install Belgard surfaces and matched finishes, quote a flat written price before any work starts, and schedule the work on a real calendar rather than promising a same-day turnaround nobody can honor. Owners usually find the problem the same way: a grout line that won’t stay sealed after the third re-caulk, a tile edge that sounds hollow underfoot, or a surface that looks installed but was never set on a proper substrate. Glendale’s older housing stock, much of it built between the 1920s and 1970s, tends to hide those failures behind a layer of cosmetic work someone did quickly before a sale.
Which Belgard Models This Applies To

Belgard is best known in Glendale for pavers and hardscape, but the company also carries bathroom-grade surfaces and finish lines, so matching a part means matching the actual product family, not just the brand name. The identification step is the one people skip. Find the original label, usually on the back of a surplus piece, inside a spec sheet left with the closing documents, or printed on the carton if you kept it. If the label is gone, measure the piece and the joint width; Belgard bathroom and hardscape lines come in specific dimensional formats, and a millimeter or two off is how the wrong part gets ordered. Photograph the unit, its joint profile, and any stamping, then send those to us. We work as an independent installer and are not affiliated with Belgard, so we match parts by the numbers you give us, not by a catalog guess.
On the OEM-versus-aftermarket question, we’re direct: an OEM Belgard piece gives you an exact match on color, dimension, and finish, which matters on a visible wall or floor. A quality aftermarket equivalent is worth considering for a hidden substrate layer or a concealed membrane accessory where the match doesn’t show. We don’t keep a stock of parts and we don’t carry parts on a truck. What we do is pull exact specifications from your measurement and photo set and quote the part and the labor on one written line, so you see the price of each before anything is ordered.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Belgard Bathroom Remodeling Is Failing
- Hollow sound when you tap the surface. That’s a sign the piece was set on an uneven bed of adhesive or the substrate wasn’t flattened first; the void is where a crack starts. In Glendale’s older homes, we regularly find the substrate was never corrected before tile went down.
- Grout that cracks in straight lines, then recurs. Hairline cracking along a seam usually means movement underneath, not bad grout. Re-caulking hides it for a season and the crack returns.
- Efflorescence, the chalky white film on grout. Moisture is wicking through and evaporating at the surface. On a wall or floor, that points to a failed membrane or a missing one entirely.
- Loose edges or a piece that rocks underfoot. Adhesive has released from the substrate. Rocking accelerates: each step widens the gap and works the neighbor loose.
- A floor slope you didn’t notice before. Water pooling at one edge of a shower floor instead of draining tells you the setting bed or the drain pitch is off. It’s a rebuild, not a spot fix.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what a written quote looks like in dollars, with the line items separated rather than blended into one mystery number.
| Scope | Installed Range (Glendale) | What’s In It |
|---|---|---|
| Full bathroom remodel | $9,000 – $28,000 | Demo, substrate correction, membrane, Belgard surfaces, fixtures, finish work |
| Small bathroom remodel | $5,000 – $12,000 | Compact footprint, same substrate and membrane standards |
| Walk-in shower installation | $4,500 – $12,000 | Pan, drain pitch, waterproofing, Belgard tile, glass |
| Tub-to-shower conversion | $3,500 – $10,000 | Tub removal, plumbing rough-in, waterproof pan, tile |
What moves the price: substrate condition, whether the existing waterproofing survived, and material selection. The quote is a flat price with a written scope and a written warranty, and no change proceeds until a change order is signed. If you have a competitor’s written estimate, bring it in and we’ll review it line by line at no charge.
DIY or Call Us?
We’re honest about where the line sits. You can safely pull up a loose edge to look at the substrate, photograph the piece and its label, and read the specs. What you can’t safely do is re-set a piece over a compromised membrane: the waterproofing layer is the one part of a bathroom you cannot inspect after the fact, and a mistake there shows up later as water staining a ceiling below. Setting material selection is another place it goes wrong, because the wrong thin-set for a given substrate doesn’t fail immediately, it fails in 18 months. If you want a real read on the condition before you commit to a scope, call (844) 320-5930 and we’ll look at your photos and measurements first.
FAQs

Installed correctly over a sound substrate and a proper membrane, a Belgard surface should give you 20-plus years. Most of the failures we see in Glendale are not the material, they’re the installation underneath it – which is why our crew corrects the substrate before setting anything. Call (844) 320-5930 for an exact quote and a condition report.
Sometimes a single piece can be replaced, if the substrate and membrane around it are still intact. A hollow piece with a sound bed and a live membrane is a candidate for a spot swap. Recurring grout cracks or efflorescence mean the problem is under the surface, and a repair will come back. We’ll tell you which you’re looking at before you spend anything.
A single-piece replacement is usually a one-day job once the part and setting materials are on site. A full bathroom remodel runs four to eight working days depending on scope, and we document the start and end in the photo record. You get a written schedule, not a verbal estimate.
We source from your label, your measurements, and your photos, then match the Belgard product family and specify the piece and the setting materials on one written line. We don’t stock parts and we don’t guess at color. If the exact OEM piece isn’t available, we tell you and quote both options so you can choose. Call (844) 320-5930 for a free estimate.
To get a written price for your Glendale bathroom, call (844) 320-5930 for a free estimate. We’re an independent installer, not affiliated with Belgard, and we install with the same standards across KraftMaid, Cambria, and Silestone finishes as well. Every visit gets a written price before work starts, a documented photo record, and the 365-Day Done Right Promise.
Written by the team at Rowan Construction Group Glendale, serving Glendale and nearby areas.












