







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Barrette Kitchen Remodeling: The Glendale Owner’s Guide
We install Barrette kitchen components for Glendale homeowners, and a typical gut-level remodel runs $14,000 to $45,000 installed, with cabinet-only work at $4,000 to $13,000 and countertops at $2,000 to $6,500. Barrette is a name most people meet through fencing and railing, and that matters here: if a “Barrette kitchen” part in your home is failing, the first job is identifying what you actually have before anyone quotes a replacement. Owners usually find out the hard way – a cabinet door that won’t stay shut, a drawer gliding rough, a countertop edge that has lifted from its substrate, or a hinge screw that spins because the particleboard behind it has given out.
Key Takeaways
- Glendale kitchen remodels run $14,000 to $45,000 installed; cabinet and countertop work sits inside that range.
- We’re an independent contractor, not affiliated with Barrette – we match parts to what’s actually in your kitchen.
- Every price is written before work starts, and nothing changes without a signed change order.
- You get a documented photo record of what we found and what we did, every visit.
Which Barrette Models This Applies To

Barrette’s residential catalog is built around exterior products – aluminum and vinyl fencing, railing systems, and the gate hardware that goes with them. Kitchen-adjacent components carrying that name are usually one of three things: a Barrette railing or gate part that ended up in a converted space like a garage-turned-kitchen or a finished basement kitchen, a box-store bundle where Barrette-branded brackets were used to fix a cabinet run or a floating shelf, or a mislabeled part the previous owner picked up at a Southern California building supply yard. Before we quote a replacement, we want to see the part itself, not a guess.
To identify the right match, check three places: the sticker or stamped mark on the bracket, hinge plate, or post cap (Barrette usually prints a series code there); the original packaging if it survived; and a caliper measurement of the part’s key dimension – post size, bolt spacing, or plate thickness. Barrette’s fence and railing lines have changed profiles over the years, so a bracket from a current catalog will not always seat into a post cut for an earlier series. That measurement is the difference between a five-minute fix and a return trip.
On the OEM-versus-aftermarket question, our answer is practical. For structural parts – anything holding weight or resisting racking – we favor OEM or a certified equivalent in the same gauge and alloy. For cosmetic caps, plugs, and trim, a quality aftermarket equivalent is fine and often half the price. Glendale homes in Adams Hill and Sparr Heights often have older converted spaces where the original part is discontinued; we’ll tell you when that’s the case and quote the closest current equivalent with the difference explained in the scope, not buried.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Barrette Kitchen Remodeling Is Failing
These are the symptoms we actually see in Glendale kitchens, and what’s behind each one:
- A bracket or support pulled out of its anchor. The screw or fastener has lost bite, usually because the wood or drywall behind it was too thin or the hole has wallowed out over years of load. Replacing the part without addressing the anchor just repeats the failure.
- A cabinet door that sags or won’t close flush. Worn hinge hardware or a hinge plate that has shifted out of alignment. On older installs, the hinge itself is fine and the mounting surface has failed.
- A drawer that glides rough or sticks halfway. A spent slide, a bent rail, or debris in the track. On box-store installations, the slides were often the cheapest component in the whole cabinet.
- Visible rust or pitting on metal parts. Glendale’s dry summers and occasional Santa Ana humidity swings are hard on cheap plated hardware. Pitting on a load-bearing part means it has already lost strength.
- A countertop edge lifting from the substrate. Failed adhesive or a substrate that wasn’t fully flat when the top went down. This one is worth seeing in person before we quote, because the fix depends on how far the separation has spread.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here are the ranges we quote in Glendale, in dollars, so you can compare against any other written estimate:
| Work | Installed Range |
|---|---|
| Kitchen remodel (full scope) | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What drives the number: how many parts need replacing versus repairing, whether the anchor behind a failed bracket has to be rebuilt, cabinet and material selection, and whether the kitchen has to be partially emptied to get access. Our quote is a flat price with a written scope and a written warranty, delivered before any work starts. Parts and labor are shown together with the parts line broken out so you can see what the hardware costs and what the install costs. The 365-Day Done Right Promise backs the work: if it isn’t right, we make it right. Bring a competitor’s written estimate and we’ll review it line by line at no charge – the Free Second Opinion offer is standing, not a promotion.
DIY or Call Us?
Some of this is genuinely owner-safe. You can tighten a loose screw, replace a plastic bumper or end cap, wipe grit out of a drawer track, and measure a part to check its size. Beyond that, the line gets real. Anything that requires drilling new anchors into a cabinet carcass, re-hanging a door out of square, or lifting a countertop edge is where a repair turns into a bigger job – and a failed anchor under a loaded cabinet is a safety issue, not a cosmetic one. We’d rather you call than take a shortcut that fails in six months. Our technicians have up to 19 years of experience, are background-checked and uniformed, and every visit includes a documented photo record of what we found and what we did.
Call (844) 320-5930 to schedule a free estimate. A live person answers, and you’ll get the price in writing before anyone picks up a tool. We also source across KraftMaid, Cambria, Silestone, and other brands if the Barrette part turns out to be the wrong fit for what you’re actually trying to solve.
FAQs

A well-anchored metal bracket or hinge in a Glendale kitchen typically serves 10 to 20 years; cheap plated fittings in a humid converted space can fail in five. Lifespan depends more on the anchor than the part itself.
Often, yes. A spinning screw can be re-anchored, a sagging door realigned, a drawer track cleaned and re-lubed. We’ll tell you honestly when a repair is the right call instead of a swap.
A single bracket or hinge replacement is usually under an hour. A full cabinet run, countertop, or multi-part kitchen scope is scheduled by the job and quoted in writing with a timeline in the scope.
We read the series code on the part, measure the critical dimensions, and pull the correct match from our vetted supplier network. If the original is discontinued, we quote the closest certified equivalent and explain the difference in the scope.
Written by the team at Rowan Construction Group Glendale, serving Glendale and nearby areas.












