A Rowan company - serving Glendale, CA
A home with a brand-new roof and gutters at golden hour
Ameristar · Glendale

Ameristar Roofing in Glendale, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Glendale
A new clay tile roof
A newly finished roof with a ridge vent and step flashing
A second-story addition that matches the existing roofline
A new front entry door with glass sidelights
A new black aluminum pool fence with a gate
A new curved paver walkway to the front porch
A galley kitchen opened up to the dining room with a new peninsula
A walk-in shower with large-format tile and a built-in niche
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Ameristar Roofing: The Glendale Owner’s Guide

We install and repair Ameristar-compatible roofing assemblies in Glendale, with most full replacements running $8,000 – $20,000 and targeted repairs landing between $400 and $1,800. We don’t promise same-day turnarounds on planned roof work – a roof is measured, permitted and scheduled, not rushed. But we’ll tell you within one visit what failed, why, and what it costs to fix, in writing.

Call (844) 320-5930

Owners usually find the problem the same way. A brown ring spreads across a bedroom ceiling after the first real rain of the season. Or a shingle tab shows up in the gutter after a Santa Ana wind event. Or you’re on the roof clearing leaves and notice the granules are gone and the mat is showing through. In Glendale, that discovery almost always happens between November and March, when the rain finally tests everything the summer sun has been quietly weakening.

Which Ameristar Models This Applies To

A new roof with clean valleys and new flashing

Ameristar is a roofing products line, and the parts that fail are rarely “the roof” as a whole. They’re specific components: shingle courses, underlayment, drip edge, ridge caps, flashing. Matching the right replacement starts with identifying what’s actually up there. Check the original install paperwork if you have it. Look for a manufacturer label on the underside of a ridge vent or on the wrapper of any exposed underlayment at an eave. If none of that exists, we measure: shingle exposure (the visible height of each course) and overall roof pitch tell us what profile and series you’re working with.

Here’s the compatibility issue most Glendale owners run into: Ameristar shingle lines vary in tab width and exposure across series, and a replacement bundle from the wrong series won’t interlock cleanly with the existing field. That mismatch is why patching one section with a close-enough shingle often fails again within a season. On the OEM-versus-aftermarket question, a quality aftermarket underlayment (synthetic instead of the older organic felt) is often the better call for a repair, and we’ll say so plainly when it is. On visible field shingles, matching the original series matters more than saving a few dollars per bundle.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Ameristar Roofing Is Failing

Five symptoms we see regularly on Glendale roofs, and what each one actually means:

  • Granule loss in the gutters. Those sand-like piles are the UV-protective coating washing off the shingle mat. Once granules are gone, the asphalt underneath breaks down fast under Glendale’s summer sun.
  • Curling or clawing shingle edges. Edges that lift and curl signal heat fatigue and moisture cycling, common on south- and west-facing slopes that take the afternoon sun without shade.
  • Interior ceiling stains after rain. A brown ring or soft drywall patch usually points to failed underlayment or flashing, not the shingle surface itself. The water traveled before it showed up inside.
  • Loose or missing flashing at walls and chimneys. Flashing is the metal that seals roof-to-wall and roof-to-chimney joints. When its sealant cracks, water gets behind the shingles and the leak starts where you can’t see it.
  • Visible mat or bare spots. When the fiberglass mat shows through the shingle, that section is past patching. It’s a replacement decision, not a repair one.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Roofers installing a new roof with safety harnesses

In Glendale, a full roof replacement runs $8,000 – $20,000. Targeted repairs fall between $400 and $1,800. Tile roof repair, if you have a tile section, runs $600 – $2,500.

What drives the range: roof square footage and pitch, how many layers of old roofing have to come off, whether the decking underneath is sound, and how much flashing and detail work the roof has. Steep pitches and complex rooflines take more labor and more safety setup. Those numbers are flat written prices with a written scope, delivered before anyone touches the roof. No work starts on a change until you’ve signed the change order. Labor and materials are itemized separately, so you can see what the shingles cost versus what the install costs.

Every job carries our 365-Day Done Right Promise. If something isn’t right, we make it right. And you get a documented photo record of what we found and what we did – the decking condition, the flashing detail, the finished field – included as standard.

DIY or Call Us?

What you can safely check yourself: look from the ground with binoculars for missing shingles or bare spots, check your attic for daylight or water staining on the rafters, and clear debris from valleys and gutters. That’s it from the ground level.

What we don’t recommend: walking a Glendale roof to patch it yourself. Roof work means height, and a fall from a two-story Glendale hillside home is a serious injury, not a scraped knee. Beyond the fall risk, a repair done without matching the shingle series and re-sealing the flashing correctly will fail again, and the second leak usually costs more than the first repair would have. We’re an independent contractor, not affiliated with Ameristar. Call (844) 320-5930 and we’ll tell you what’s actually wrong before you spend a dollar.

FAQs

A remodeled family room with new windows and a window seat

How long does Ameristar roofing last in Glendale? Most asphalt shingle roofs in Glendale last 18 – 25 years, though the intense summer sun and dry stretches can push the upper end down on unshaded south- and west-facing slopes. Shade, ventilation and attic airflow all affect how fast the shingles age. Call (844) 320-5930 for an honest read on yours – estimates are free.

Can it be repaired instead of replaced? Yes, if the damage is isolated to a few shingles or one flashing detail, and the rest of the field is still sound. Once granules are gone across large sections or the mat is showing, patching just delays a replacement. We’ll measure and tell you which side of that line you’re on.

How long does the swap take? A targeted repair is usually a single visit. A full replacement typically takes one to three days depending on roof size, pitch and how many old layers come off. We schedule it and confirm in writing before we start.

How do you source the part? We match the shingle series, underlayment type and flashing profile to what’s already installed, so the new work interlocks with the existing field. If an exact series match isn’t available, we’ll tell you the closest equivalent and why we recommend it. We also work with KraftMaid, Cambria and Silestone on other projects. Call (844) 320-5930 for a free written estimate.

If your Ameristar roof is showing any of these signs, the fastest way to a real answer is a free written estimate. Call (844) 320-5930. We’ll measure the roof, document what we find, and put the price in writing before any work begins.

Written by the team at Rowan Construction Group Glendale, serving Glendale and nearby areas.

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A remodeled primary bathroom with a soaking tub and walk-in showerA new bay window with a cushioned seatA new wood side gate with black hardwareA new concrete driveway with a paver borderA stone counter, tile backsplash and open shelf after a kitchen remodelA remodeled hall bathroom with subway tile and a floating vanity

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Rowan in Glendale

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Glendale team

A local vetted partner works across Glendale and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 320-5930
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Rowan Construction Group Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch