







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Ameristar Kitchen Remodeling: The Glendale Owner’s Guide
We install and replace Ameristar-compatible kitchen components across Glendale, and a full kitchen remodel here typically runs $14,000 – $45,000 installed. The work is planned, not same-day: a cabinet, countertop, or island swap is scheduled after a written scope and a written price are in your hands. Most Glendale owners don’t discover a failing component all at once. It shows up as a cabinet door that won’t sit flush, a countertop seam that’s started to shadow, or a drawer that scrapes every time you close it. By the time you’re searching for a fix, the part has usually been soft-failing for months.
Key Takeaways
- Ameristar-compatible kitchen remodeling in Glendale: $14,000 – $45,000 installed.
- We’re an independent contractor. We’re not affiliated with Ameristar, and we don’t claim to be.
- We quote a flat written price before work starts, and no change happens without your signature.
- Glendale’s interior heat and dry summers are hard on cabinet boxes and countertop seams. Both fail faster here than the product literature assumes.
Which Ameristar Models This Applies To

Ameristar builds kitchen cabinetry and component lines sold through dealer and builder channels, and the model line usually lives on a label inside the cabinet door or on the back of a drawer box. Before we quote anything, we read that label. It tells us the series, the box construction, and the door style, which is what determines whether a replacement door or drawer front will actually match the rest of your kitchen.
The compatibility gotcha most Glendale homeowners run into: Ameristar door styles get revised over the years, and a door with the same name can have a different hinge bore pattern or a slightly different overlay than the one in your kitchen. Measure the existing door, don’t just match the name. We take the bore spacing, the overlay, and the door thickness in millimeters before we order.
On the OEM-versus-aftermarket call, we’re straightforward about it. If the cabinet is under its factory warranty, OEM is the right path. If it’s out of warranty, a quality aftermarket door or drawer front from a vetted line can match the finish and save real money, and we’ll tell you which way the numbers point. We also work with KraftMaid, Cambria, and Silestone on projects where the original Ameristar line is discontinued.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Ameristar Kitchen Remodeling Is Failing
- Doors that won’t stay aligned. Usually a worn or stripped hinge screw in the cabinet box, not the door itself. Once the screw hole in the box wallows out, no amount of adjusting the hinge will hold.
- Drawers that scrape or stick. The slide or the drawer box has warped. In Glendale’s dry summer air, a particleboard drawer box can swell and shrink enough over a few seasons to bind against the frame.
- Countertop seams that darken or lift. The seam adhesive has failed and moisture is getting under the edge. Left alone, that’s a chip waiting to happen.
- Cabinet boxes that feel soft near the sink or dishwasher. Water intrusion has compromised the substrate. This is the one that turns a door swap into a cabinet replacement.
- A backsplash or island that’s pulling away at the caulk line. Movement in the substrate, often from the cabinet box, showing up at the tile edge.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what the numbers look like in Glendale, installed, with labor and materials in one flat written price:
| Work | Installed Range |
|---|---|
| Full kitchen remodel | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What drives the range: cabinet box condition, whether plumbing or electrical has to move, and the material you pick. A door-and-drawer-front swap lands near the bottom. A full box replacement with a new countertop lands near the top. Under Clause 1 of the Haven Standard, you get the written price before anyone picks up a tool, and no change happens without a signed change order. The work carries our 365-Day Done Right Promise.
DIY or Call Us?
You can safely check a few things yourself. Open a cabinet door and look at the label inside for the model line. Run a finger along the countertop seams to feel for a lip. Look under the sink for soft wood or staining. Those checks cost nothing and tell you a lot.
Where DIY goes wrong is at the cabinet box. Replacing a door is forgiving. Replacing a box means disconnecting plumbing, leveling to the floor, and getting the countertop to sit flat again. Get that wrong and you’re back to a bigger job than you started with. The other place owners lose time is ordering a door that looks right and doesn’t fit the bore pattern.
The most useful thing you can do is bring us a photo of the label and a measurement of the door. Call (844) 320-5930 and we’ll review it with you. Estimates are free, and if you have a competitor’s written quote, we’ll do a free second opinion on it, line by line.
FAQs

Expect 15 to 25 years from a well-built cabinet box, with doors and drawer fronts needing attention sooner, often around year 10 to 12. Glendale’s dry summers and warm interior temperatures are hard on particleboard and seam adhesive, so components here tend to age faster than the same product in a milder climate. Call (844) 320-5930 for an exact quote on your kitchen.
Sometimes. A stripped hinge screw can often be fixed with a repair insert. A warped drawer box or a soft cabinet floor usually can’t be saved, and patching it just delays the inevitable. We’ll tell you which one you’re looking at before you spend money either way.
A door or drawer-front replacement is typically a one-day job. A cabinet box replacement runs longer, and a full kitchen remodel is scheduled in phases over a few weeks. You’ll get a written timeline with your written price before work starts. Call (844) 320-5930 to schedule your free estimate.
We read the model label, measure the existing part, and source from the OEM if the cabinet is under warranty or match it from a vetted aftermarket line if it isn’t. We don’t claim to stock parts or carry them on a truck. Every part is ordered for your kitchen, and you get a photo record of what we found and what we installed.
Written by the team at Rowan Construction Group Glendale, serving Glendale and nearby areas.












