







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ActiveYards Fence Installation: The Glendale Owner’s Guide
We install ActiveYards-compatible fencing throughout Glendale, and an installed ActiveYards vinyl or aluminum fence typically runs $3,500 – $9,000 depending on length, height, and series. When a gate stops latching, a post leans after a wet season, or a panel panel bows toward the neighbor’s side, it usually means a bracket, post anchor, or hardware component has given out before the fence itself has. That’s the moment owners start hunting for the failed part. In Glendale, we see it most often on south-facing runs where the vinyl gets eight hours of direct sun and hard 100-plus-degree afternoons.
Which ActiveYards Models This Applies To

ActiveYards sells through independent dealers and manufactures several distinct lines: vinyl privacy fences, vinyl picket and semi-privacy, aluminum ornamental, and composite hybrid styles. Each line uses its own post profile, rail spacing, and hardware, so the compatibility question is not “is it ActiveYards?” but “which series is it?” The parts don’t swap across lines cleanly. A bracket cast for a 5-inch square post will not seat on a 5-inch round, and a 6-foot privacy kit’s rails are not the same gauge as the 4-foot picket line’s.
How to identify your line before you call anyone: look for a stamp or sticker inside the top rail ending, on the gate frame, or on the back of a post cap. Most ActiveYards components carry a series code there. If the sticker is gone, measure your post’s outside dimension in both directions, measure the rail’s height and thickness, and photograph the failed hardware still attached to the fence. Those three things, measurement, photo, and location of a legible stamp, are what any installer needs to match the right part.
OEM part versus aftermarket: for structural pieces like post anchors and gate frames, we specify OEM or an equivalent that meets the same load spec, because a hardware gauge mismatch is how gates sag six months after a repair. For cosmetic pieces like caps and decorative inserts, a quality aftermarket match is fine and often lands closer to the original price. One gotcha worth knowing: ActiveYards has revised post-cap and gate-hinge designs across production years, so a part from a dealer’s shelf may not fit a fence installed a few years earlier. We confirm the production year or the series stamp before ordering. Rowan Construction Group Glendale is an independent service provider and is not affiliated with ActiveYards; we install and repair fencing that uses ActiveYards components.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ActiveYards Fence Installation Is Failing
Fence failure rarely shows up all at once. Here are the five symptoms we see most in Glendale, each with what’s actually breaking underneath.
- A gate that drags or won’t latch. The hinge hardware or gate frame has deformed, or the gate post has shifted in soil that expands and contracts with the wet-dry cycle. On aluminum gates, a hinge-pin wear develops and the swing drops.
- A post that leans after rain. The post’s footing wasn’t set deep enough for Glendale’s clay-heavy soils, which swell when wet and shrink when dry. A leaning post is a footing problem, not a vinyl problem.
- Panels bowing or flexing. Rail-to-post connections have loosened, or a rail has warped from heat. Vinyl expands and contracts with temperature, and a run that was tight in winter can bow in August without enough expansion allowance.
- A snapped or cracked picket or rail. Impact damage or a brittle section that took too much sun. Dark-colored vinyl runs a little hotter on a south-facing elevation and gets brittle before the rest of the fence does.
- Rust or white chalky streaks at hardware. Coated hardware has broken down, exposing the base metal. On aluminum, this usually shows at the hinge or post anchor first, before the fence itself is affected.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Repairing a failed component on an ActiveYards fence in Glendale typically lands in our $3,500 – $9,000 installed range when the fix is more than a one-piece swap, and smaller repairs come in below that. What drives the price: the number of panels or posts involved, whether the footing has to be re-dug, the series and its part availability, and gate hardware versus gate frame.
We quote a flat written price before any work starts, with the part, the labor, and the warranty stated as separate line items, so you can see exactly what the number covers. No work proceeds on a change until you sign a change order. That’s the discipline behind the Haven Standard, and it’s why projects finish within a few percent of the price you agreed to. Our technicians have up to 19 years of experience, crews are background-checked and uniformed, and a live person answers calls any hour. Every visit includes a documented photo record of what was found and what was replaced, at no extra charge.
DIY or Call Us?
You can safely walk the fence line yourself and do three things: photograph the failed part, measure the post and rail, and check for a series stamp. That information is useful and poses no risk.
Where DIY goes wrong: setting a new post footing in Glendale’s clay, re-tensioning a gate frame without bending it, and matching hardware gauge closely enough that the fix outlasts the season. Those are where an owner with good intentions creates a bigger repair. If a post has shifted or a gate frame has bent, call us at (844) 320-5930 before you buy parts. We’ll tell you what’s actually failed and what it costs to fix properly.
FAQs

A well-installed ActiveYards vinyl or aluminum fence typically lasts 20-plus years in Glendale’s climate, but hardware and post footings often fail well before the fence panels do. The vinyl itself holds up; the anchor and hinge components are the usual first failures. Call (844) 320-5930 for an honest look at what’s failing on your run.
Often yes: a dropped gate is frequently a hinge-pin or post-anchor fix, not a full gate replacement. A leaning post means the footing needs attention. We’ll tell you plainly which parts need replacing and which can be repaired, and quote both. Estimates are free.
Most single-part or single-gate repairs are done in one visit; a multi-post or footing repair can run longer depending on the line and part availability. We confirm the timeline in writing before the crew arrives. Call (844) 320-5930 to schedule your free estimate.
We match the ActiveYards series, post profile, and production year before ordering, using OEM components or an equivalent that meets the same load spec. If a design revision rules out a current-shelf part, we say so up front rather than forcing a fit. Call (844) 320-5930 for a written quote.
Whether you’re repairing a single gate in Glendale or replacing a full fencing run, call (844) 320-5930 to schedule your free estimate. We put the price in writing before anything starts, answer the phone any hour, and stand behind the work with our 365-Day Done Right Promise. We also work with KraftMaid, Cambria, and Silestone on other trades.
Written by the team at Rowan Construction Group Glendale, serving Glendale and nearby areas.












