







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Belgard Driveway & Pavers: The Glendale Owner’s Guide
We install Belgard-compatible driveway and paver systems in Glendale, and a full paver driveway typically lands between $7,000 and $18,000 depending on square footage, base prep, and pattern complexity. Same-day installation isn’t realistic on planned hardscape work – a proper paver driveway runs three to six working days once permits and materials are set – but we can get out to measure and quote quickly. Rowan Construction Group Glendale is an independent contractor and is not affiliated with Belgard.
Owners usually discover a problem before they see it. A paver shifts underfoot at the driveway apron and water starts pooling after rain. Efflorescence – the white chalky film on the surface – won’t wash off with the hose. A joint opens a quarter inch wider each season, or the border course starts walking toward the street. In Glendale, where summer heat cycling runs hard and the winter rains come in concentrated bursts, these symptoms show up on different timelines than they do in cooler parts of Southern California.
Which Belgard Models This Applies To

Belgard’s residential driveway systems span several compatibility families, and matching the right product matters because face dimensions changed between generations. The old and new lines are not interchangeable at the joint. Here’s what we check:
- Dimensions: Measure the face of an existing paver (length and width in inches, not the nominal name). Belgard product names don’t always correspond to current face dimensions, and a paver called “6×9” from 2012 may not match a current 6×9.
- Base profile and thickness: Belgard’s driveway-rated pavers are typically 2 ⅜ inches or 2 ¾ inches thick; thinner patio-grade product should not be used on a driveway subject to vehicle loads. If a prior install used the thinner product on a driveway, that’s often the reason for the failure.
- Color family: Belgard runs specific color names through their catalog (Victorian, Cambridge, Dublin, and others). Pull a sample paver from the edge of the field, not from the center, and photograph it in daylight – color match between batches can shift, especially after a few summers of UV exposure.
OEM Belgard pavers are the safest match, but quality aftermarket equivalents exist in the same face dimensions and thickness. Our guidance: match the thickness and face spec exactly, accept a close color match if the original colorway has been discontinued, and never mix thicknesses within the same field. We work with Belgard and Techo-Bloc pavers, and our sourcing depth across fifty-plus vetted brands means the written quote reflects honest material numbers rather than inflated ones.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Belgard Driveway & Pavers Is Failing
Here’s what we look at during a Glendale driveway inspection, and what each symptom tells us:
- Paver rocking or settling underfoot. This usually means the sand setting bed has washed out or the base wasn’t compacted to spec when installed. Base failure in Glendale clay soils is common – the soil expands and contracts with the wet-dry cycle and pushes the pavers up.
- Efflorescence that won’t wash off. White mineral bloom on the surface is normal in the first year, but ongoing bloom after multiple seasons points to water migrating under the pavers. That’s a drainage problem, not a cleaning problem.
- Widening joints between pavers. Joint sand that keeps washing out or blowing away means the pavers are moving. Once joints open past about ⅛ inch, weeds establish and the interlock is compromised.
- Pooling water on the driveway surface. Belgard driveways need a minimum 1.5% to 2% slope away from the structure. If water stands in the middle after rain, the slope is wrong or the base has settled unevenly.
- Cracked or chipped paver edges at the apron or garage threshold. This is often impact damage from vehicle tires, but recurring chips at the same location suggest the pavers aren’t fully seated on the base.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed Belgard-compatible driveway work in Glendale runs within these calibrated ranges:
- Paver driveway installation (new): $7,000-$18,000
- Driveway replacement (tear-out and reinstall): $5,000-$14,000
- Driveway sealing: $250-$700
- Concrete driveway installation (comparison): $4,500-$12,000
- Paver patio installation: $3,500-$11,000
The range is driven by total square footage, base preparation depth (Glendale’s expansive soils often need deeper class II base than a coastal install), pattern complexity, and whether demolition of the existing surface is included. Our quote is a flat written price with a written scope before work starts – no “call for a quote” step, no surprise additions. Under Clause 1 of the Haven Standard, the price is written before anyone picks up a tool, and no change proceeds without a signed change order. The 365-Day Done Right Promise covers the workmanship for a full year.
DIY or Call Us?
Laying a few accent pavers on a garden path is genuinely within reach for a handy homeowner. A Belgard driveway is not. The failure points that matter on a vehicle-rated surface – base compaction, slope, edge restraint, polymeric sand installation – are the ones amateur installs get wrong, and they don’t show up for two or three seasons. By then the correction costs as much as the original job.
What you can safely do yourself: check for water pooling after rain, probe joint depth with a screwdriver, photograph the paver face dimensions, and record where cracks or shifts appear so you can describe the pattern when you call. Beyond that – base repair, edge restraint resetting, full replacement – bring in a crew. Our technicians have up to 19 years of experience, they’re background-checked and uniformed, and every visit includes a documented photo record so you have evidence of what we found and what we did. Call (844) 320-5930 to schedule a free estimate.
FAQs

How long do Belgard pavers last on a Glendale driveway? Twenty-five to fifty years is typical when the base is prepared correctly and joints are maintained, though Glendale’s expansive clay soils and summer heat cycling put more stress on the system than a coastal install would see. Base failure shortens that lifespan dramatically – a paver that looks fine but rocks underfoot is failing from underneath. Call (844) 320-5930 for an honest assessment – estimates are free.
Can a failing paver driveway be repaired instead of fully replaced? Yes, in most cases. If the base is intact and only isolated pavers or a border course have failed, a spot repair with matching pavers and fresh polymeric sand usually restores the system. Full replacement makes sense when base failure is widespread or the slope is wrong. We’ll tell you which one you’re looking at before quoting. Call (844) 320-5930 for a free estimate.
How long does a Belgard driveway replacement take? A full paver driveway replacement in Glendale typically takes three to six working days, weather permitting. Spot repairs can be done in a single day. Sequenced work – tear-out, base prep, compaction, paver setting, cutting, sand – can’t be rushed without compromising the lifespan. Call (844) 320-5930 and we’ll give you a written timeline with the written price.
How do you source the right Belgard paver for my existing driveway? We identify the face dimensions and thickness from a sample paver at the edge of the field, cross-reference against current Belgard catalog specs, and order through our vetted supplier network. If the original colorway is discontinued, we present close-match options with the written comparison before you commit. We also work with Techo-Bloc pavers, KraftMaid, Cambria, and Silestone across other scopes. Call (844) 320-5930 to start the match.
Ready to see what your Belgard driveway should actually cost? Call (844) 320-5930 for a free estimate. We’ll come out, measure, photograph what we find, and hand you a written price with a written scope and a written warranty before any work begins. Bring a competitor’s estimate if you have one – our Free Second Opinion reviews it line by line at no charge.
Written by the team at Rowan Construction Group Glendale, serving Glendale and nearby areas.












