







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Home Additions & ADU: The Glendale Owner’s Guide
Homeowners searching “Jerith additions and ADU in Glendale” almost always ask the same question: what does it actually cost to build, and can Jerith’s modular construction methods be used for a real addition or ADU on my Glendale property? The short answer: a Jerith-style modular addition or ADU in Glendale runs $45,000 to $130,000 for a home addition, and $90,000 to $220,000 for a detached ADU, installed. We install Jerith-compatible modular additions and ADUs, and we’re an independent contractor, not affiliated with Jerith.
Owners discover problems slowly. A sunroom addition from the 1990s starts holding water at the wall tie-in. A modular ADU that passed inspection in 2018 shows hairline cracks at panel seams after three summers of valley heat. The discovery usually happens during a remodel or a refinance appraisal, not on a maintenance checklist.
Which Jerith Models This Applies To

Jerith manufactures modular additions (sunrooms, patio rooms, screen rooms) and ADU panel systems in aluminum and vinyl, and the model line matters because panel spacing, header thickness, and wall tie-in dimensions differ by series and vintage. Older Jerith sunroom panels use a 2-inch aluminum frame; newer ADU panel systems often run 4-inch structural frames with different anchor spacing.
To identify your unit, check the data plate on the interior face of the header beam or the underside of the roof panel. Model number, series, and manufacturing date live there. If the plate is gone (common after repainting), measure frame thickness and panel module width; Jerith’s catalog specs are keyed to those dimensions.
OEM Jerith parts are available through the manufacturer, but lead times for discontinued series can run six to twelve weeks. Quality aftermarket equivalents exist for panels, gaskets, and fasteners, and for most non-structural components they meet or exceed original specs at lower cost. For anything load-bearing, we recommend OEM or a certified equivalent. We also install KraftMaid, Cambria, and Silestone finishes when an ADU project calls for cabinetry and counters.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Jerith Home Additions & ADU Is Failing
- Water staining at the panel-to-wall tie-in. The flashing membrane at the junction of a modular addition and the main structure is the first thing to fail. In Glendale’s hot, dry summers and occasional winter rains, UV-degraded sealant pulls away and water finds the gap. Cause: end-of-life sealant and failed membrane, not a structural problem yet.
- Hairline cracks at panel seams. Expansion and contraction over years stresses the seam gaskets. On a Jerith ADU, these cracks usually mean gasket compression failure, not panel damage. Cause: thermal cycling, accelerated by Glendale’s temperature swings between day and night.
- Gaps or open joints at the header and roof line. Header sag or anchor loosening shows up as a visible gap between the roofline and the wall. Cause: foundation settlement or anchor failure, not a panel problem, and worth investigating before anything is replaced.
- Condensation inside panels or wet interior walls. Moisture trapped inside a modular wall indicates a failed vapor barrier or a breach at the attachment point. Cause: localized water intrusion, often repairable without full panel replacement.
- Doors and windows that no longer close flush. This is a frame-shift symptom, not a hardware issue. On a Jerith ADU, it usually points to differential settlement at the slab edge or a loosened anchor at one corner. Cause: foundation movement, which is a different job than a panel swap.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed pricing for Jerith-compatible additions and ADUs in Glendale:
- Home Addition: $45,000 to $130,000
- ADU Construction: $90,000 to $220,000
- Garage Conversion (ADU): $30,000 to $80,000
- Panel or tie-in repair (not full build): quoted line by line after inspection
The range is driven by footprint, whether a foundation is new or existing, glazing type and count, and the cabinet and counter selections if the project includes a kitchen or bath. Every quote we write is a flat price with a written scope and a written warranty before any work starts. No change proceeds without a signed change order. If the scope shifts mid-project, the paperwork governs.
The workmanship warranty on a Jerith-compatible installation is printed on the job quote. The 365-Day Done Right Promise is our standing offer: if it is not done right, we make it right.
DIY or Call Us?
What a Glendale owner can safely check: the model and series plate, the visible condition of sealant and flashing at the tie-in, the alignment of doors and windows, and interior staining that points to water intrusion. Measure the frame thickness and note the panel width before calling.
What should not be done yourself: realigning a header, replacing anchors at the structural tie-in, or resetting a panel on a foundation that has shifted. An addition or ADU shares structural load with the primary residence. A wrong anchor placement or a weakened header compromises the whole assembly and can void insurance coverage. The 19 years of experience on our teams covers this exact kind of diagnosis. Call (844) 320-5930 and we’ll tell you what the symptom means before recommending any work.
FAQs

With routine sealant maintenance, a Jerith modular addition lasts 20 to 30 years; an untended unit in Glendale’s sun can fail at the tie-in within 10 to 15. Replace sealant and check flashing every 5 to 7 years, faster if the unit gets full afternoon sun.
Often yes. A failed gasket, sealant joint, or flashing can be repaired without touching the panel assembly, and that is the right call when the panel itself is intact. A cracked panel, a shifted header, or a settled foundation requires more. We inspect first and quote both paths when they’re viable.
A gasket or flashing replacement typically takes one to two days. A panel swap on a Jerith sunroom takes two to four days, depending on whether the part is OEM or aftermarket sourced. A full tie-in rebuild runs longer and depends on what the inspection finds.
We source OEM Jerith components through the manufacturer when the series is still active, and certified aftermarket equivalents for discontinued series. Lead time is the deciding factor: aftermarket parts typically arrive faster while meeting the same dimensional spec. Either way, the part is confirmed against your model and series before it’s ordered.
Bring us your model plate information, your symptom, and any existing quote. We’ll review a competitor’s written estimate line by line at no charge, an offer we call the Free Second Opinion. Call (844) 320-5930 to schedule your free estimate or to have a technician confirm whether your Jerith addition or ADU needs a repair or a full build in Glendale.
Written by the team at Rowan Construction Group Glendale, serving Glendale and nearby areas.












