A Rowan company - serving Glendale, CA
A backyard with a new horizontal privacy fence
Jerith · Glendale

Jerith Driveway & Pavers in Glendale, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Glendale
A new white vinyl privacy fence with a double gate
A new stained cedar privacy fence
A finished backyard cottage with a small covered porch
A new roof with clean valleys and new flashing
A new multi-panel patio door opening a kitchen to the patio
A new paver patio with a seat wall and fire pit
A remodeled primary bathroom with a soaking tub and walk-in shower
A single-story rear room addition with tall windows and a new patio
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Jerith Driveway & Pavers: The Glendale Owner’s Guide

We install and repair Jerith-compatible driveway and paver systems throughout Glendale, and a full paver driveway installation here typically runs $7,000 – $18,000 depending on square footage, base prep, and paver selection. Smaller repairs, resetting, and paver replacement sit well below that. We’re an independent service provider, not affiliated with Jerith.

Call (844) 320-5930

Owners usually find us one of two ways: a section of pavers has heaved or settled after a wet season, leaving a trip ledge at the driveway apron, or a paver has cracked and the joint sand is washing out with every hose-down. In Glendale’s older hillside lots, that heaving is often the base telling you something, not the paver itself.

Key Takeaways

  • Jerith-compatible paver installation in Glendale runs $7,000 – $18,000; repair and reset work is priced per section.
  • Most “failed” paver complaints trace to base compaction and drainage, not the paver unit.
  • You get a flat written price, a documented photo record, and the 365-Day Done Right Promise.
  • Call (844) 320-5930 for a free estimate and a line-by-line written quote.

Which Jerith Models This Applies To

A new front yard fence with a matching gate

Jerith makes vinyl and composite fencing, railing, and landscape border products, and its paver and border lines are commonly used as driveway edging, planting-strip borders, and decorative inlay strips within a larger hardscape. If you’re matching a replacement piece, the identification step matters more than the brand name. Look for a stamped or molded mark on the underside or the cut end of the unit, measure the actual face dimensions to the sixteenth of an inch, and note the profile depth. Jerith’s molded border and edging profiles have changed dimensions across production runs, so a “same” piece ordered by color name alone can arrive a quarter inch off and refuse to seat against the existing run.

On the OEM-versus-aftermarket question for Jerith specifically, the honest answer is that color and profile matching is the whole ballgame. A generic paver border in “the same color” will almost never match a weathered Jerith run after two or three California summers, because vinyl and composite fade at different rates than cast concrete or clay. Where an exact Jerith profile is still available, matching it is the cleaner path. Where it isn’t, we set the new piece and let the crew photograph the joint so you can see the match before we close out. The same sourcing discipline we apply to KraftMaid, Cambria, and Silestone work applies here: name the part, verify the spec, write it down.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Jerith Driveway & Pavers Is Failing

Here are the symptoms we actually see on Glendale driveways, and what each one is telling you.

  • Heaving or a rocking paver at the apron. Usually a base compaction or drainage problem underneath – water is pooling and freezing the joint open. The paver is the messenger, not the cause.
  • Cracked or chipped border units. Vehicle load over an edge that wasn’t set deep enough, or a border run with no restraint. Cracks at the same spot every season point to edge restraint, not bad material.
  • Joint sand washing out after rain. Poor drainage slope or missing polymeric joint sand. Glendale’s dry spells followed by heavy rain push water through faster than sand can hold.
  • Color fading or chalking on the sun-facing run. UV exposure on vinyl and composite borders. Fading is cosmetic; once the surface chalks, though, it won’t take a sealer evenly.
  • Loose or lifted edging along a planting strip. The border wasn’t anchored to the base course. This one is a real trip hazard at the driveway edge and worth fixing before someone catches a foot on it.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A new curved paver walkway to the front porch

Jerith-compatible paver driveway installation in Glendale runs $7,000 – $18,000. A paver patio installation is $3,500 – $11,000. If the existing driveway needs full replacement, that’s $5,000 – $14,000. Sealing an existing surface is $250 – $700, and concrete driveway installation, if you’re comparing materials, is $4,500 – $12,000.

What moves you within those ranges: square footage, excavation and haul-off, base depth, drainage corrections, and paver selection. Parts-plus-labor is shown as separate lines so you can see what the material costs versus what the install costs. Under Clause 1 of the Haven Standard, you get a written price before any work starts, and no change proceeds without a signed change order. Every visit includes a documented photo record of what we found and what we did. The 365-Day Done Right Promise covers the workmanship.

DIY or Call Us?

You can safely check a few things yourself: measure the heaving or settling, photograph the joint pattern, note where water pools after rain, and confirm the paver dimensions. What goes wrong for most owners is the base. Resetting a paver without re-compacting and re-grading the base underneath just buys you another season before the same spot heaves again. And a paver edge that isn’t restrained properly is a genuine trip hazard for anyone using the driveway.

This part isn’t dangerous to handle the way a garage-door spring is, but base failure and drainage corrections are where the real work sits, and that’s the part that determines whether the fix lasts. If you’ve already reset the same section twice, it’s time to look underneath. Call (844) 320-5930 for an exact quote – estimates are free, and we’ll walk the driveway with you and show you what we’re seeing.

FAQs

A galley kitchen opened up to the dining room with a new peninsula

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A garage converted into a guest room and home officeA new clay tile roofNew double-hung windows in a dining roomA new paver pool deckAn open kitchen and dining area after a remodelA freestanding soaking tub in a remodeled primary bathroom

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Rowan in Glendale

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Glendale team

A local vetted partner works across Glendale and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 320-5930
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Rowan Construction Group Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch