A Rowan company - serving Glendale, CA
A backyard with a new horizontal privacy fence
Ameristar · Glendale

Ameristar Fence Installation in Glendale, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Glendale
A new wood side gate with black hardware
A new white vinyl privacy fence with a double gate
A stone counter, tile backsplash and open shelf after a kitchen remodel
A remodeled hall bathroom with subway tile and a floating vanity
A garage converted into a guest room and home office
New architectural shingles with a clean valley
A new casement window over a kitchen sink
New painted shaker cabinets with an organized deep drawer
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Ameristar Fence Installation: The Glendale Owner’s Guide

Ameristar-compatible fence installation in Glendale typically runs $3,500 to $9,000 installed, depending on linear footage, gate count, and the condition of the posts and footings the new panels anchor to. We’re an independent contractor, not affiliated with Ameristar, and we source and install Ameristar-compatible aluminum and steel systems for Glendale homeowners. You usually find out something’s wrong one of two ways: a post shifts after a winter of saturated soil, or a panel starts rubbing and the gate you used to close with one hand now needs a shoulder.

Call (844) 320-5930

Under the Haven Standard, the price is written before anyone starts. That number is yours to screenshot and compare.

Which Ameristar Models This Applies To

A new front yard fence with a matching gate

Ameristar builds ornamental aluminum and steel fencing across several rackable and non-rackable series, and the compatibility details that trip people up are rarely the panel itself. They’re the brackets, post caps, and hinge hardware that have to match the rail profile exactly. A panel from one series will not seat cleanly into brackets cut for another, and a gate hinge sized for a lighter residential rail will wallow out a heavier one within a season.

To identify what you have, three things beat a model number every time:

  • Measure the rail profile. Width and thickness at the end of a rail. Ameristar residential aluminum runs in a narrow band of profiles, and a measurement in inches narrows the field faster than any label.
  • Check the post spacing. On-center distance between posts tells us whether you’re looking at a rackable system or a fixed-panel one, and those don’t interchange.
  • Look for a stamp or sticker on the inside face of a rail or the underside of a post cap. Where it’s still legible, it settles the question outright.

On OEM versus aftermarket: for rails, pickets, and structural posts, Ameristar-compatible OEM parts are the safer call because the finish warranty and the profile match travel together. For post caps, brackets, and standard hinges, a quality aftermarket equivalent is honest value and we’ll tell you when that’s the case. KraftMaid, Cambria, and Silestone are among the brands we also work with on other trades, and the same rule holds across all of them: match the spec, not the logo.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Ameristar Fence Installation Is Failing

  • Posts leaning after heavy rain. Glendale’s clay-heavy soils saturate and swell, then shrink in the dry months, and a post set in undersized or shallow footings walks out of plumb. The fence isn’t the problem; the footing is.
  • Rust at the weld points, not the panel face. Powder coat protects flat surfaces well. What fails first in Southern California sun is the coating at factory welds and cut ends, where the finish is thinnest. If you see orange at the joints after a few years, water has been sitting in there.
  • A gate that drags or won’t latch. Usually a hinge or latch alignment issue, sometimes a post that has moved a quarter inch. Left alone, the gate racks the whole frame it’s attached to.
  • Loose or missing brackets. Self-tapping screws backing out of aluminum posts, or brackets that no longer grip the rail. A panel held by two of four brackets is one wind event from a repair.
  • Panels out of level along a slope. A run installed without proper racking on a hillside lot will show stair-stepped panels or gaps that grow with each post. It’s a layout error, not wear.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A new curved paver walkway to the front porch

Fence installation in Glendale runs $3,500 to $9,000, and the number moves on four things: linear footage, whether existing posts and footings can be reused, gate count and gate hardware, and site access for digging.

  • Panel and post installation: $3,500 to $9,000 installed, depending on run length
  • Footing repair or replacement where posts have moved: quoted as a line item before work starts
  • Gate and hardware: priced separately from panel run
  • Removal and haul-away of the old fence: quoted in writing

Every quote is a flat written price with a written scope, and no change proceeds without a signed change order. That discipline is why Rowan’s projects finish within a few percent of the agreed number, across 4,000-plus jobs. The work carries the 365-Day Done Right Promise: if it isn’t done right, we make it right.

DIY or Call Us?

What you can safely check yourself: post plumb with a level, bracket tightness with a screwdriver, rust at weld points, gate swing and latch alignment, and whether your posts move when you push on them. Those five checks tell you most of what matters.

Where DIY goes wrong: post footings. Digging the correct depth and diameter, setting the post in the right concrete mix, and getting the run level across a slope is the part that separates a fence that lasts from one that leans in two years. Pulling and resetting an existing post is harder than setting a new one because you’re working around a fence that’s already standing. We’ve watched homeowners spend a weekend on a footing repair and end up calling us anyway.

Call (844) 320-5930 to schedule a free estimate. Bring a competitor’s written quote and we’ll review it line by line at no charge.

FAQs

A galley kitchen opened up to the dining room with a new peninsula

How long does an Ameristar-compatible fence last in Glendale? Expect 15 to 25 years for the panels and posts, with the coating at welds and cut ends being what ages first. The fence outlives its footings on clay soil more often than the other way around, which is why footing quality matters more than panel brand over a 20-year horizon.

Can the fence be repaired instead of replaced? Yes, often. A leaning post, a failing gate hinge, or a handful of bad brackets can usually be repaired without replacing the run. Call (844) 320-5930 for an honest read on repair versus replace before you commit to either.

How long does the swap take? A typical residential run in Glendale is one to three days for installation, longer if footings need to be reset and cured. You’ll get a written schedule with your written quote.

How do you source the Ameristar-compatible parts? We measure your existing system and match the profile, rail dimensions, and bracket type before ordering. Every visit includes a documented photo record of what we found and what we did, and you’ll see the measurements in writing before any part is ordered.

Call (844) 320-5930 for a free estimate on your Ameristar-compatible fence installation in Glendale. Written price before any work starts, every time.

Written by the team at Rowan Construction Group Glendale, serving Glendale and nearby areas.

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
An open kitchen and dining area after a remodelA freestanding soaking tub in a remodeled primary bathroomA second-story addition that matches the existing rooflineA newly finished roof with a ridge vent and step flashingA new front entry door with glass sidelightsA walk-in shower with large-format tile and a built-in niche

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Rowan in Glendale

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Glendale team

A local vetted partner works across Glendale and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 320-5930
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Rowan Construction Group Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch