







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Barrette Home Additions & ADU: The Glendale Owner’s Guide
We install Barrette-compatible home additions and ADU packages in Glendale, and the installed price for the structural and finish work typically runs $45,000 to $130,000 for a home addition and $90,000 to $220,000 for a detached or attached ADU, with a written flat price before any work starts. Barrette is best known for fence, railing and outdoor structure systems; when a Glendale homeowner tells us their “Barrette addition” is failing, what they usually own is a Barrette-branded covered patio, pergola or attached structure that has been converted or is being converted into livable or ADU square footage. The discovery is rarely sudden: a post base pulling away from the footing, a beam that has cupped at the ledger, a poly rail or post cap that has chalked and cracked after a few summers of San Fernando Valley sun, or a door that has started to rack because the structure it hangs from is moving.
Which Barrette Models This Applies To

Barrette’s catalog is wide and not every line is a candidate for conversion or enclosure work. The outdoor structure and railing families most often involved are the aluminum and composite railing systems, the vinyl and composite fence lines, and the pre-engineered patio and pergola kits sold through home centers. Identification matters more than the logo: check the sticker or stamped mark on the post or rail, measure the actual post cross-section (many vinyl posts are nominal 4×4 or 5×5 with a wall thickness you can feel at the cut end), and note whether the rail is aluminum-reinforced or hollow composite. That last detail decides whether the assembly can carry a screen wall or roof load or must be reinforced or replaced.
The OEM-versus-aftermarket call is where Glendale owners lose money. Barrette-branded replacement posts, caps and brackets are the safest match when the original hardware is intact and you want a like-for-like swap. Quality aftermarket aluminum rail and structural connectors are usually fine, and often stronger, when a licensed installer is sizing them to the actual loads and to Glendale’s seismic and wind requirements. Rowan Construction Group Glendale is an independent service provider and is not affiliated with Barrette; we source to the structure you have. We also work with KraftMaid, Cambria and Silestone when the addition includes a kitchen or bath.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Barrette Home Additions & ADU Is Failing
- Post bases lifting or rusting at the footing. Water pooling at the base plus expansion from sun-driven temperature swings loosens the anchor. In Glendale’s older foothill lots, the culprit is often drainage that was never graded away from the slab.
- Beam cupping or checking at the ledger. Dimensional lumber exposed under a converted patio roof dries unevenly in low-humidity summers. Cupping signals moisture getting in where the flashing should be.
- Rails or caps chalked, cracked or brittle. Composite and vinyl degrade under UV; inland Glendale gets more of it than coastal buyers expect. Surface cracking that reaches the substrate means the member is done.
- Doors and windows that no longer close square. When a converted structure is racking, openings go out of plumb before the frame visibly moves. This is the earliest structural warning.
- Soft spots in the floor or sill plate. Termites and dry rot love a converted patio slab that was never properly isolated from soil. Probe the sill plate with a screwdriver; if it sinks, you have a repair, not a cosmetic fix.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For Glendale, here is where the numbers land before anyone picks up a tool. These are installed ranges, parts and labor, with the written scope spelled out line by line.
- Home addition (structural and finish): $45,000 to $130,000
- ADU construction: $90,000 to $220,000
- Garage conversion: $30,000 to $80,000
What drives the range: whether the existing Barrette structure can be reinforced and reused or must come out, foundation and footing upgrades to current code, the seismic detailing Glendale requires, and finish level. Every quote is a flat written price with a written scope and a written warranty. Under Clause 1, the price is written before anyone starts, and no change proceeds without a signed change order. The 365-Day Done Right Promise covers the work.
DIY or Call Us?
You can safely check a few things yourself: photograph the post bases, probe the sill plate for soft wood, confirm the rail is aluminum-reinforced or hollow, and note any door or window that has gone out of square. Where owners get hurt or waste money is in the structural moves. Cutting a reinforced rail to fit a screen wall, sistering a cupped beam without load calculations, or re-anchoring a post base into a footing you have not inspected all create failures that show up a season later and cost more to correct. On anything that touches the load path or the seismic connections in Glendale, a trained professional should size and install it. Call (844) 320-5930 and we will look at the structure with you.
FAQs

How long does a Barrette outdoor structure last in Glendale? A properly flashed aluminum or vinyl Barrette structure typically holds up 15 to 25 years in Glendale’s climate, while an unflashed or unmaintained one can fail in 8 to 12. Inland heat and UV drive the difference.
Can the failing part be repaired instead of replaced? Often yes. A single post, cap or rail run can be swapped without rebuilding the whole structure, and that is where we start. Call (844) 320-5930 for an exact quote, and the estimate is free.
How long does a replacement take? A rail, cap or single-post swap is usually a one-day job; a full structural conversion or ADU build runs from weeks to months depending on scope. We give you the schedule in writing with the price.
How do you source the right Barrette part? We identify the line from the stamp or sticker and the post dimensions, then match OEM Barrette replacement parts or a quality aftermarket equivalent sized to the loads. You get the part name and the price on the written quote before we order.
Bring us a photo of the failing structure, or a competitor’s written estimate for a free second-opinion review line by line. Call (844) 320-5930 for your free estimate. We’re licensed and insured, crews are background-checked and uniformed, and a live person answers the phone around the clock.
Written by the team at Rowan Construction Group Glendale, serving Glendale and nearby areas.












