A Rowan company - serving Glendale, CA
A remodeled kitchen with a wood island, painted cabinets and a plaster range hood
Barrette · Glendale

Barrette Kitchen Remodeling in Glendale, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Glendale
A remodeled kitchen with a waterfall island and wood cabinets
An open kitchen and dining area after a remodel
A galley kitchen opened up to the dining room with a new peninsula
A single-story rear room addition with tall windows and a new patio
A new clay tile roof
New double-hung windows in a dining room
A new front yard fence with a matching gate
A new paver pool deck
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Barrette Kitchen Remodeling: The Glendale Owner’s Guide

We install Barrette kitchen components for Glendale homeowners, and a typical gut-level remodel runs $14,000 to $45,000 installed, with cabinet-only work at $4,000 to $13,000 and countertops at $2,000 to $6,500. Barrette is a name most people meet through fencing and railing, and that matters here: if a “Barrette kitchen” part in your home is failing, the first job is identifying what you actually have before anyone quotes a replacement. Owners usually find out the hard way – a cabinet door that won’t stay shut, a drawer gliding rough, a countertop edge that has lifted from its substrate, or a hinge screw that spins because the particleboard behind it has given out.

Call (844) 320-5930

Key Takeaways

  • Glendale kitchen remodels run $14,000 to $45,000 installed; cabinet and countertop work sits inside that range.
  • We’re an independent contractor, not affiliated with Barrette – we match parts to what’s actually in your kitchen.
  • Every price is written before work starts, and nothing changes without a signed change order.
  • You get a documented photo record of what we found and what we did, every visit.

Which Barrette Models This Applies To

Installers leveling a new base cabinet during a kitchen remodel

Barrette’s residential catalog is built around exterior products – aluminum and vinyl fencing, railing systems, and the gate hardware that goes with them. Kitchen-adjacent components carrying that name are usually one of three things: a Barrette railing or gate part that ended up in a converted space like a garage-turned-kitchen or a finished basement kitchen, a box-store bundle where Barrette-branded brackets were used to fix a cabinet run or a floating shelf, or a mislabeled part the previous owner picked up at a Southern California building supply yard. Before we quote a replacement, we want to see the part itself, not a guess.

To identify the right match, check three places: the sticker or stamped mark on the bracket, hinge plate, or post cap (Barrette usually prints a series code there); the original packaging if it survived; and a caliper measurement of the part’s key dimension – post size, bolt spacing, or plate thickness. Barrette’s fence and railing lines have changed profiles over the years, so a bracket from a current catalog will not always seat into a post cut for an earlier series. That measurement is the difference between a five-minute fix and a return trip.

On the OEM-versus-aftermarket question, our answer is practical. For structural parts – anything holding weight or resisting racking – we favor OEM or a certified equivalent in the same gauge and alloy. For cosmetic caps, plugs, and trim, a quality aftermarket equivalent is fine and often half the price. Glendale homes in Adams Hill and Sparr Heights often have older converted spaces where the original part is discontinued; we’ll tell you when that’s the case and quote the closest current equivalent with the difference explained in the scope, not buried.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Barrette Kitchen Remodeling Is Failing

These are the symptoms we actually see in Glendale kitchens, and what’s behind each one:

  • A bracket or support pulled out of its anchor. The screw or fastener has lost bite, usually because the wood or drywall behind it was too thin or the hole has wallowed out over years of load. Replacing the part without addressing the anchor just repeats the failure.
  • A cabinet door that sags or won’t close flush. Worn hinge hardware or a hinge plate that has shifted out of alignment. On older installs, the hinge itself is fine and the mounting surface has failed.
  • A drawer that glides rough or sticks halfway. A spent slide, a bent rail, or debris in the track. On box-store installations, the slides were often the cheapest component in the whole cabinet.
  • Visible rust or pitting on metal parts. Glendale’s dry summers and occasional Santa Ana humidity swings are hard on cheap plated hardware. Pitting on a load-bearing part means it has already lost strength.
  • A countertop edge lifting from the substrate. Failed adhesive or a substrate that wasn’t fully flat when the top went down. This one is worth seeing in person before we quote, because the fix depends on how far the separation has spread.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A new wood side gate with black hardware

Here are the ranges we quote in Glendale, in dollars, so you can compare against any other written estimate:

Work Installed Range
Kitchen remodel (full scope) $14,000 – $45,000
Small kitchen remodel $9,000 – $20,000
Cabinet installation $4,000 – $13,000
Countertop installation $2,000 – $6,500
Backsplash installation $800 – $2,500
Kitchen island installation $3,000 – $10,000

What drives the number: how many parts need replacing versus repairing, whether the anchor behind a failed bracket has to be rebuilt, cabinet and material selection, and whether the kitchen has to be partially emptied to get access. Our quote is a flat price with a written scope and a written warranty, delivered before any work starts. Parts and labor are shown together with the parts line broken out so you can see what the hardware costs and what the install costs. The 365-Day Done Right Promise backs the work: if it isn’t right, we make it right. Bring a competitor’s written estimate and we’ll review it line by line at no charge – the Free Second Opinion offer is standing, not a promotion.

DIY or Call Us?

Some of this is genuinely owner-safe. You can tighten a loose screw, replace a plastic bumper or end cap, wipe grit out of a drawer track, and measure a part to check its size. Beyond that, the line gets real. Anything that requires drilling new anchors into a cabinet carcass, re-hanging a door out of square, or lifting a countertop edge is where a repair turns into a bigger job – and a failed anchor under a loaded cabinet is a safety issue, not a cosmetic one. We’d rather you call than take a shortcut that fails in six months. Our technicians have up to 19 years of experience, are background-checked and uniformed, and every visit includes a documented photo record of what we found and what we did.

Call (844) 320-5930 to schedule a free estimate. A live person answers, and you’ll get the price in writing before anyone picks up a tool. We also source across KraftMaid, Cambria, Silestone, and other brands if the Barrette part turns out to be the wrong fit for what you’re actually trying to solve.

FAQs

A new concrete driveway with a paver border

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A freestanding soaking tub in a remodeled primary bathroomA second-story addition that matches the existing rooflineA newly finished roof with a ridge vent and step flashingA new front entry door with glass sidelightsA new black aluminum pool fence with a gateA new curved paver walkway to the front porch

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Rowan in Glendale

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Glendale team

A local vetted partner works across Glendale and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 320-5930
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Rowan Construction Group Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch