A Rowan company - serving Glendale, CA
A remodeled kitchen with a wood island, painted cabinets and a plaster range hood
ViewLux · Glendale

ViewLux Kitchen Remodeling in Glendale, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Glendale
An open kitchen and dining area after a remodel
A galley kitchen opened up to the dining room with a new peninsula
A stone counter, tile backsplash and open shelf after a kitchen remodel
A new paver pool deck
A freestanding soaking tub in a remodeled primary bathroom
A second-story addition that matches the existing roofline
A newly finished roof with a ridge vent and step flashing
A new front entry door with glass sidelights
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

ViewLux Kitchen Remodeling: The Glendale Owner’s Guide

ViewLux kitchen remodeling in Glendale runs $14,000 – $45,000 installed for a full kitchen, with cabinet installation at $4,000 – $13,000 and countertop work at $2,000 – $6,500. We supply and install ViewLux-compatible cabinets, doors, drawer boxes, and hardware matched to your specific model line, and we deliver a written price before any work starts. Scheduling is planned, not same-day: most Glendale kitchens are measured within a week of your call and installed on a confirmed calendar date.

Call (844) 320-5930

Owners usually find the problem in one of three places. A cabinet door that will not sit flush after two Glendale summers. A drawer box that sags under a load of cast iron. Or a soft-close hinge that stopped closing softly somewhere around year four. ViewLux builds to a recognizable spec, and once you know which line you own, the fix is a parts match, not a full tear-out.

One note on who we are: Rowan Construction Group Glendale is an independent construction contractor. We are not affiliated with ViewLux, and we do not manufacture or warehouse their parts. What we do is identify the exact component your kitchen needs, source it, and install it under a written price and a written warranty.

Key Takeaways

  • Full ViewLux-compatible kitchen remodeling in Glendale: $14,000 – $45,000 installed.
  • Cabinet-only work: $4,000 – $13,000. Countertops: $2,000 – $6,500. Backsplash: $800 – $2,500.
  • Parts are matched by model line and measurement, never guessed from a photo.
  • We quote a flat written price before work begins, and no change proceeds without a signed change order.
  • Our technicians have up to 19 years of experience with cabinet systems and kitchen fit-out.

Which ViewLux Models This Applies To

Installers leveling a new base cabinet during a kitchen remodel

ViewLux kitchen products land in a few broad families, and the part you need depends entirely on which family your kitchen belongs to. The most reliable identifier is not the showroom name. It is the sticker inside the cabinet door or on the back of the drawer box, which typically lists a model code, a door style, and a finish code. Photograph it before you call anyone.

The compatibility gotcha that catches most Glendale owners: hinge bore patterns changed across ViewLux production runs. A 35mm cup bore is standard on most contemporary lines, but the screw-hole spacing on the mounting plate varies by series. Order a hinge by “soft-close” alone and you can end up with a plate that will not seat in the existing pilot holes without drilling new ones into the cabinet face. Measure the cup diameter, the plate hole centers, and the overlay distance, and write all three down.

Drawer box slides have a similar split. Side-mount and undermount systems are not interchangeable, and the cabinet’s interior dimensions decide which you can use. When we quote a replacement, we measure the opening, check the existing slide’s mounting pattern, and confirm the part number against the model code before we order.

On the OEM-versus-aftermarket question: for structural parts like drawer boxes and load-bearing hinges, OEM or a directly cross-referenced equivalent is the safer call. For handles, pulls, and shelf pins, quality aftermarket hardware is often equal or better at a lower price. We also service KraftMaid, Cambria, and Silestone kitchens, so if your ViewLux kitchen has been updated with other brands over the years, we can identify all of it in one visit.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your ViewLux Kitchen Remodeling Is Failing

These are the failures we see most often in Glendale kitchens, and what is usually happening underneath:

  • Doors that no longer sit flush. The hinge plate has loosened or the cabinet face has shifted with seasonal wood movement. Glendale’s dry summers pull moisture out of cabinet frames, and a door that closed cleanly in spring can catch by August.
  • A drawer that sags or drags. The slide’s mounting screws have pulled out of the cabinet side, or the slide’s bearing race has worn. A single stripped screw hole in particleboard will keep failing until the hole is filled and re-drilled.
  • Soft-close that slams. The hinge’s internal damper has worn out. This is a part failure, not an adjustment problem, and no amount of tightening will bring the soft close back.
  • Drawer box sides separating from the front panel. The joint has failed from repeated load stress. This one is common in kitchens where a drawer holds heavy cookware and has been pulled open by one corner for years.
  • Visible water staining under the sink cabinet floor. Not a cabinet part failure on its own, but a sign the cabinet base needs inspection before anything else is installed. We check the substrate on every visit and photograph what we find.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A remodeled primary bathroom with a soaking tub and walk-in shower

Installed pricing for ViewLux-compatible kitchen work in Glendale:

Scope Installed price range
Full kitchen remodel $14,000 – $45,000
Small kitchen remodel $9,000 – $20,000
Cabinet installation $4,000 – $13,000
Countertop installation $2,000 – $6,500
Backsplash installation $800 – $2,500
Kitchen island installation $3,000 – $10,000

What drives the range: the number of cabinet boxes, whether the layout moves (plumbing and electrical relocation adds cost), door style and finish, and countertop material. Parts-plus-labor is quoted line by line, so you can see the hardware cost separate from the install labor. Every quote we write is a flat price with a written scope and a written warranty, delivered before anyone picks up a tool. Under Clause 1 of the Haven Standard, that price is written before work starts, and no change proceeds unless the change order is signed.

DIY or Call Us?

Some of this an owner can check safely. Swapping a handle or a shelf pin is a five-minute job with a screwdriver. Tightening a hinge adjustment screw is also reasonable if you know which screw controls which axis. Photograph the model sticker, measure the bore and overlay, and you have done the useful half of the work already.

Where it goes wrong: re-drilling hinge plate holes into a cabinet face without confirming the bore pattern, replacing a drawer slide without checking whether the box is side-mount or undermount, and pulling a cabinet box away from the wall to reach a part before confirming what is behind it. If the cabinet is attached to a wall with plumbing or wiring running through the cavity, a wrong move gets expensive fast. And if your kitchen involves gas at all, stop and call a licensed professional. No exception.

If you are unsure which ViewLux line you own, call us at (844) 320-5930 and we will walk you through the sticker and the measurements before you order anything.

FAQs

A single-story rear room addition with tall windows and a new patio

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A new wood side gate with black hardwareA new concrete driveway with a paver borderA remodeled hall bathroom with subway tile and a floating vanityA garage converted into a guest room and home officeNew architectural shingles with a clean valleyA new casement window over a kitchen sink

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Rowan in Glendale

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Glendale team

A local vetted partner works across Glendale and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 320-5930
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Rowan Construction Group Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch