A Rowan company - serving Glendale, CA
A home with a brand-new roof and gutters at golden hour
T
Therma-Tru · Glendale

Therma-Tru Roofing in Glendale, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Glendale
A new roof with clean valleys and new flashing
A new clay tile roof
A remodeled primary bathroom with a soaking tub and walk-in shower
A single-story rear room addition with tall windows and a new patio
New double-hung windows in a dining room
A new front yard fence with a matching gate
A new paver pool deck
An open kitchen and dining area after a remodel
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Therma-Tru Roofing: The Glendale Owner’s Guide

We install and repair roofing assemblies on Glendale homes that include Therma-Tru door and entry components, with typical roofing work running $400 – $1,800 for repairs and $8,000 – $20,000 for a full replacement depending on pitch, square footage, and material. Rowan Construction Group Glendale is an independent service provider and is not affiliated with Therma-Tru. Most Glendale owners don’t go looking for this page until a leak shows up at the threshold of a Therma-Tru entry door, or until they notice the flashing collar around a door surround has pulled away and stained the stucco below it.

Call (844) 320-5930

Roofing and entry systems meet at one of the hardest junctions in a house: the door head and its flashing. When that junction fails, the water shows up indoors, at the door sill, or on the ceiling of the room closest to the entry, and it usually shows up months after the actual breach began.

Key Takeaways

  • Therma-Tru entry doors are rated for weather exposure but rely on the roof flashing above them to keep water out.
  • Glendale’s dry summers followed by winter rain events expose failed flashings faster than steady-climate markets.
  • Repairs typically fall in the $400 – $1,800 range; full roof replacement, $8,000 – $20,000 depending on scope.
  • We write the price before any work starts, under Clause 1 of the Haven Standard.

Which Therma-Tru Models This Applies To

A standing-seam metal roof over a covered porch

Therma-Tru entry door systems and their surrounding roof assemblies are what this page covers. That means the Fiber-Classic and Smooth-Star lines, the American Style collection, and the door and sidelight configurations that show up on Glendale’s 1920s bungalows, mid-century ranches, and newer infill builds. The door manufacturer doesn’t require a specific roof part to go with it. What matters is the flashing, the head casing, and the projection of the roof or awning above the door, and those are determined by the house, not the door label.

To identify what you have, look for the Therma-Tru label on the door edge or jamb, which lists the series and the door slab size (typically 36″ x 80″ for a standard entry). Then measure the roof overhang or awning above the door and note the pitch. That’s the number that determines which flashing and drip edge profile will work.

The OEM-versus-aftermarket decision on the roofing side is straightforward: flashing and drip edge are commodity parts, and a quality aftermarket flashing from a recognized manufacturer performs the same job as a proprietary one. We don’t sell parts or stock them on a truck. We source the right spec for the job and install it. Cross-reference with our other brand work, including KraftMaid, Cambria, and Silestone, is available on request.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Therma-Tru Roofing Is Failing

Most Glendale owners describe the same handful of symptoms. Each points to a specific failure inside the assembly.

  • Water staining at the door head or on the interior jamb. The flashing above the door has separated, cracked, or been installed without proper overlap. Water tracks down the door head and shows up where the casing meets the wall.
  • Peeling paint or bubbling stucco on the wall above the door. Moisture is trapped behind the finish because the drip edge isn’t shedding water clear of the wall. This is the most common early sign in Glendale’s older stucco homes.
  • Visible gaps or lifted flashing where the roof meets the door surround. Sealant has aged out, typically after seven to ten years of sun exposure, and the flashing is no longer watertight at the transition.
  • Daylight visible from inside around the door frame or above it. Either the door frame has shifted or the roof structure above has settled, and the opening has lost its seal.
  • Granule loss or curling on the shingles directly above the door. That section takes more concentrated sun and runoff than the rest of the roof, and it fails first. A localized repair is often enough; if the shingles are curling across the whole slope, the slope is at the end of its life.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Roofers installing a new roof with safety harnesses

Here are the Glendale installed ranges we quote, with labor, materials, and disposal included.

Scope Installed Range
Roof repair (flashing, localized shingle, drip edge) $400 – $1,800
Tile roof repair $600 – $2,500
Roof replacement (asphalt, architectural shingle) $8,000 – $20,000
Metal roof installation $15,000 – $40,000

What moves the number: roof pitch and access, the square footage of the affected area, whether the decking underneath is sound or needs replacement, the layer count if old roofing comes off, and the material you choose. We deliver a written line-item quote before work starts, and no change proceeds without a signed change order. The work is covered by the 365-Day Done Right Promise, backed by The Haven Standard.

DIY or Call Us?

Some checks are safe and worth doing. From the ground with binoculars, you can spot lifted flashing, missing shingle tabs above the door, or a drip edge that’s pulling away. Indoors, check for fresh water stains on the door head after a rain. Those are observations, not repairs.

What we don’t recommend: getting on a roof above a door on a ladder to reseal flashing or replace a shingle. Glendale roofs are often steep, and the area above an entry door is directly over a hard landing. Fall risk on a steep single-story roof is the same as on a two-story. Flashing repair also requires understanding how the layers overlap, and resealing without correcting the underlying layering traps water and makes the next leak worse. Call us at (844) 320-5930. The estimate is free, and we’ll show you a photo record of what we find before anyone touches a shingle.

FAQs

A finished backyard cottage with a small covered porch

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A galley kitchen opened up to the dining room with a new peninsulaA walk-in shower with large-format tile and a built-in nicheA remodeled family room with new windows and a window seatA new bay window with a cushioned seatA new wood side gate with black hardwareA new concrete driveway with a paver border

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Rowan in Glendale

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Glendale team

A local vetted partner works across Glendale and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 320-5930
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Rowan Construction Group Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch