A Rowan company - serving Glendale, CA
A living room with a wall of new windows and a sliding glass door
M
Mr-Glass · Glendale

Mr-Glass Driveway & Pavers in Glendale, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Glendale
New double-hung windows in a dining room
A new front entry door with glass sidelights
A galley kitchen opened up to the dining room with a new peninsula
A walk-in shower with large-format tile and a built-in niche
A remodeled family room with new windows and a window seat
A standing-seam metal roof over a covered porch
A new wood side gate with black hardware
A new concrete driveway with a paver border
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Mr-Glass Driveway & Pavers: The Glendale Owner’s Guide

We install Mr-Glass-compatible driveway and paver systems in Glendale, and the honest installed number for most residential driveways here runs $7,000 – $18,000 for pavers, or $4,500 – $12,000 for concrete. Scheduling depends on material lead time and permit review, and full driveway replacements are planned jobs, not same-day work; we tell you the real timeline in writing before anything is ordered. Owners usually discover a failing system the same way: a hairline crack that spiders out over one winter, a low corner that pools water after every rain, pavers that rock underfoot when the mail carrier walks up, or a paver edge that has started to heave because the base underneath was never compacted to the right depth. The failure is almost never the surface. It’s the base. That’s what separates a driveway that lasts in Glendale from one that doesn’t.

Call (844) 320-5930

Which Mr-Glass Models This Applies To

Mr-Glass sells residential driveway and paver systems through distinct lines, and the practical distinction that matters to a Glendale homeowner is paver thickness and base spec, not the label on the box. A 60mm paver is set for foot traffic and light residential driveways; a 70mm or 80mm paver is engineered for vehicles and heavier loads. If your existing Mr-Glass paver is a 60mm profile and you’re replacing it under a driveway that takes two cars daily, matching the original thickness restores the failure. To identify what you have, pull one paver from the field and measure the thickness at the edge with a tape, then read any stamp or laser marking on the underside. Mr-Glass also sells matching edge restraints and polymeric joint sand; the paver itself is rarely the weak link, but a missing edge restraint at the driveway apron is one of the most common Glendale failure points. Original-equipment replacement pieces match the color lot and the thickness spec exactly. Quality aftermarket equivalents from manufacturers like Belgard and Techo-Bloc are dimensionally compatible with most Mr-Glass base systems but will not match a faded color lot, so if you’re patching a section rather than replacing the whole run, color-match becomes a real decision rather than an afterthought.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Mr-Glass Driveway & Pavers Is Failing

These are the symptoms we see most often on Mr-Glass installs around Glendale, each with the underlying cause:

  • Pavers rocking when stepped on. The bedding sand has shifted or washed out, which means water is getting under the surface and the joint sand is not doing its job. Once a paver moves, the ones beside it follow.
  • Ponding in one corner after rain. A low spot in the base or a settled subgrade. Glendale’s clay-heavy soils expand during the wet season and contract in summer, and a base compacted to less than 95% density will settle within two or three winters.
  • Hairline cracks spreading across a driveway or slab. Movement under the slab, root intrusion from a nearby parkway tree, or a pour that was too thin. A hairline can be cosmetic; a crack over a quarter-inch wide usually signals the base.
  • Heaving at the apron where the driveway meets the street. Missing or failed edge restraint lets the outermost course spread and lift. This is the single most common repair we make on Glendale driveways because the apron takes the most load.
  • Weeds pushing up through joints. Not a cosmetic problem. It’s joint sand that has been eroded by runoff, which means the interlock has loosened and the surface is no longer holding water out of the base.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A new bay window with a cushioned seat

Here’s the number you came for, before you call. All ranges are installed in Glendale, materials plus labor:

  • Paver driveway installation: $7,000 – $18,000
  • Concrete driveway installation: $4,500 – $12,000
  • Driveway replacement (existing removed and hauled): $5,000 – $14,000
  • Asphalt driveway paving: $3,500 – $9,000
  • Driveway sealing: $250 – $700
  • Paver patio installation: $3,500 – $11,000

What drives the range: total square footage, whether existing material has to be demolished and hauled, base depth (a Glendale driveway over clay wants a deeper compacted base than the minimum, and this is not optional), edge restraint, drainage correction, and whether the Mr-Glass paver profile you’re matching is still in a current color lot. Under Clause 1 of the Haven Standard, the written flat price arrives before any work starts, with the scope and the workmanship warranty printed on the same document. No change order is signed until you’ve read it. The 365-Day Done Right Promise covers the install for a full year, and we back that with a written terms page, not a brochure claim. Sourcing runs through vendors like Belgard and Techo-Bloc when a Mr-Glass color match isn’t available, so the quote reflects real material pricing rather than a padded swing number.

DIY or Call Us?

Some things you can check safely. Other things you really should not. Pull one loose paver, look at the bedding sand, and see whether there’s standing water underneath after a hose test. Probe the base with a screwdriver: if it pushes in easily, the base is soft. Check that the edge restraint is still fastened. Those four diagnoses cost nothing and tell you a lot.

What goes wrong when homeowners go further: lifting a section of pavers to “just reset them” without compacting the base to spec almost always fails again inside a year, often faster. We’ve seen it repeatedly on Glendale jobs where a homeowner replaced a patch and the surrounding field shifted within one rainy season. The other thing that goes wrong is weight. A full paver field is heavy, and loading 300 square feet into a single wheelbarrow run is how backs get hurt. A concrete driveway is a different category of problem: cutting, removal and haul-away require equipment most homeowners don’t have. If your base is soft, the job is a base rebuild, not a patch, and that’s not a weekend project. Our technicians have up to 19 years of experience and have handled this exact repair across Glendale. Call (844) 320-5930 and we’ll walk through what you’re seeing.

FAQs

Installers setting a new window and checking it for level

How long does a Mr-Glass paver driveway last in Glendale? A properly installed Mr-Glass paver system over a correctly compacted base lasts 25 to 30 years in Glendale’s climate; a poorly based one fails in 3 to 7. The paver itself is not the variable. Base depth, compaction and edge restraint are. Call (844) 320-5930 for a free assessment of your existing install.

Can the existing driveway be repaired instead of replaced? Yes, if the failure is localized to one section, the apron, or a single sunken course. Repairs make sense when the base under the rest of the field is still firm. Full replacement is the right call when the base has failed broadly or the pavers have heaved across more than a quarter of the field. We tell you which one is honest on the written quote.

How long does a driveway replacement take? A typical residential Mr-Glass paver driveway in Glendale takes 3 to 6 working days from demolition to final compaction and joint sand, weather permitting. Concrete pours add cure time before you can park on them. The exact schedule is written on your quote, not estimated verbally.

How do you source the right Mr-Glass part? We measure your existing paver’s thickness and read the underside marking, then source a color-lot match through Mr-Glass where available or a dimensional equivalent from Belgard or Techo-Bloc where it isn’t. We claim no parts inventory; the right piece is ordered to your spec. Rowan Construction Group Glendale is an independent contractor and not affiliated with Mr-Glass. We also service KraftMaid, Cambria, and Silestone products across other trades. Call (844) 320-5930 to schedule your free written estimate.

Written by the team at Rowan Construction Group Glendale, serving Glendale and nearby areas.

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A remodeled hall bathroom with subway tile and a floating vanityA garage converted into a guest room and home officeNew architectural shingles with a clean valleyA new white vinyl privacy fence with a double gateNew painted shaker cabinets with an organized deep drawerA new paver patio with a seat wall and fire pit

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Rowan in Glendale

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Glendale team

A local vetted partner works across Glendale and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 320-5930
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Rowan Construction Group Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch