A Rowan company - serving Glendale, CA
A living room with a wall of new windows and a sliding glass door
M
Mr-Glass · Glendale

Mr-Glass Windows & Doors in Glendale, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Glendale
A new bay window with a cushioned seat
A new casement window over a kitchen sink
A newly finished roof with a ridge vent and step flashing
A new black aluminum pool fence with a gate
A new curved paver walkway to the front porch
A galley kitchen opened up to the dining room with a new peninsula
A walk-in shower with large-format tile and a built-in niche
A remodeled family room with new windows and a window seat
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Mr-Glass Windows & Doors: The Glendale Owner’s Guide

We install and replace Mr-Glass windows and doors across Glendale, and the installed price for a single unit swap typically lands between $4,500 and $15,000 depending on frame material, glazing package, and structural surprises behind the wall – with impact-rated units running $8,000 to $25,000 when the whole opening is upgraded. This is planned work, not same-day work: a quality replacement is measured, ordered, and scheduled, not pulled off a shelf. Owners usually discover the failure the same way – a window that won’t latch flush in a 1920s Glendale bungalow, a slider that grinds on its track after a hot August, or fog trapped between panes on a north-facing unit that never clears. We’re an independent service provider, not affiliated with Mr-Glass, and every quote we write is a flat written price before anyone picks up a tool.

Call (844) 320-5930

Which Mr-Glass Models This Applies To

A new front entry door with glass sidelights

Mr-Glass builds window and door assemblies under series and model numbers rather than one universal part, so the first job is identifying what’s actually in the opening. The quickest check is the manufacturer’s label, usually on the window frame’s inner jamb or the top of the door slab behind the weatherstripping – it carries the series designation, the glass code, and the date of manufacture. Measure the visible glass and the rough opening separately; the two numbers don’t match and a quote built on the wrong one is a quote that fails at install. Friction-stay hardware on casement models, roller assemblies on sliders, and multipoint locking gear on patio doors are the three most-replaced components, and each is series-specific – hardware from one Mr-Glass line rarely drops into another without modification.

The OEM-versus-aftermarket decision matters here. Genuine Mr-Glass replacement sashes and hardware preserve the original warranty on the untouched assembly and fit without fuss, but they carry a premium and a lead time. A quality aftermarket equivalent – a matching glazing package from a vetted supplier, a compatible roller or lock set – can save real money and is a sound choice for older units already out of warranty. What we won’t do is drop in a hardware set that “looks close.” In Glendale’s housing stock, a fraction of a millimeter in a sash balance or a striker plate is the difference between a door that seals and one that whistles in a Santa Ana wind.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Mr-Glass Windows & Doors Is Failing

Windows and doors fail slowly, then all at once. These are the symptoms we find most often when we open up a Mr-Glass assembly in Glendale:

  • Fog or condensation trapped between the panes. The insulating glass seal has broken, letting moisture into the argon gap. It’s cosmetic at first and becomes a thermal failure – that room gets noticeably harder to cool.
  • A slider that grinds or jumps its track. Worn rollers or a bent track rail, usually worsened by dust and heat cycling. Left alone, the sash edge chews the frame.
  • A door that no longer latches or seals flush. Settled hinges, a warped slab, or a multipoint lock out of alignment. You’ll feel the draft before you see the daylight.
  • Water staining or soft wood at the sill. Failed flashing or a degraded sill gasket letting water behind the frame. This is the one that turns a window swap into a wall repair if it’s ignored.
  • Condensation on the inside of the glass in winter. Not a failed seal – usually a sign the assembly has poor thermal performance for the room’s humidity. Worth a look before you assume the glass is gone.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Installers setting a new window and checking it for level

Here’s the number in writing, before anyone shows up. In Glendale, a full Mr-Glass window replacement runs $4,500 – $15,000, and impact-rated installation runs $8,000 – $25,000. Single hardware or sash swaps sit well below that, since you’re paying for the part and the labor, not a whole unit.

What drives the range: frame material (vinyl versus wood-clad versus aluminum), glazing package, the number of openings, and what’s behind the wall. Old Glendale homes with lath-and-plaster or stucco walls take more careful trimming than a clean drywall opening, and that labor is real. Every quote we write is a flat price with a written scope – line-item parts and labor, not a lump sum you have to take on faith. No change proceeds without a signed change order, so the number you agree to is the number you pay, within a few percent. The work carries our 365-Day Done Right Promise, backed by The Haven Standard.

DIY or Call Us?

Some checks are safe and worth doing yourself. Feel for drafts around the frame with a lit incense stick on a windy day. Confirm the slider rollers are clean and the track isn’t bent. Read the model label and note the series number and glass code – that saves time on the phone. What goes wrong is the install itself: dropping a sash into a frame, re-seating a multipoint lock, or resetting flashing is where a weekend project turns into a water-damage repair. A window that leaks at the sill because the flashing was rushed is a far bigger cost than the swap. If your opening is above the ground floor, or the assembly has failed at the frame rather than the glass, that’s a job for a trained installer. Call (844) 320-5930 and we’ll talk through what you’re seeing.

One more thing we offer: bring us any written estimate from another contractor and we’ll review it line by line at no charge, as a free second opinion. It costs you nothing and it’s saved more than one Glendale homeowner from a quote that left out the flashing.

FAQs

A single-story rear room addition with tall windows and a new patio

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A freestanding soaking tub in a remodeled primary bathroomA second-story addition that matches the existing rooflineA standing-seam metal roof over a covered porchA new wood side gate with black hardwareA new concrete driveway with a paver borderA stone counter, tile backsplash and open shelf after a kitchen remodel

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Rowan in Glendale

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Glendale team

A local vetted partner works across Glendale and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 320-5930
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Rowan Construction Group Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch