A Rowan company - serving Glendale, CA
A living room with a wall of new windows and a sliding glass door
E
ES Windows · Glendale

ES Windows Driveway & Pavers in Glendale, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Glendale
A new multi-panel patio door opening a kitchen to the patio
New double-hung windows in a dining room
A garage converted into a guest room and home office
New architectural shingles with a clean valley
A new white vinyl privacy fence with a double gate
New painted shaker cabinets with an organized deep drawer
A remodeled hall bathroom with patterned floor tile and painted walls
A remodeled kitchen with a waterfall island and wood cabinets
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

ES Windows Driveway & Pavers: The Glendale Owner’s Guide

If you own an ES Windows product and need driveway or paver work matched to it, we install ES Windows-compatible systems in Glendale, with paver driveways typically running $7,000 – $18,000 and concrete driveways $4,500 – $12,000 depending on square footage, base prep, and drainage. We also handle driveway replacement at $5,000 – $14,000 and sealing at $250 – $700. Every quote is a flat written price with a written scope before anyone starts, and we’ll put our findings in writing so you can compare.

Most owners discover the problem the same way: a section of pavers heaves after a wet winter, a hairline crack in the driveway spreads year over year, or water pools against the garage threshold instead of running to the street. In Glendale, that pattern usually points to base failure, not the surface itself.

Call (844) 320-5930

Which ES Windows Models This Applies To

A new bay window with a cushioned seat

ES Windows runs several product lines, and the driveway and paver work we match to them depends on how the original install was detailed at the threshold. Series with deeper sill profiles and wider frame setbacks take a different paver transition than the flush-set lines, and getting that wrong is where water intrusion starts. The fastest way to confirm what you have is to check the label on the frame edge or the paperwork from the original install, then measure the sill depth and the clear opening before ordering anything.

When sourcing, you’ll face the OEM-versus-aftermarket decision. OEM parts arrive with a known spec but a longer lead time and a higher number. Quality aftermarket equivalents cover the same function at a lower price, provided the transition detail and drainage slope match your series. We source across more than fifty vetted brands and we don’t carry parts on a truck; we order to your model. We also service KraftMaid, Cambria, and Silestone products, so a multi-trade Glendale project stays under one written scope.

Rowan Construction Group Glendale is an independent service provider and is not affiliated with ES Windows.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your ES Windows Driveway & Pavers Is Failing

  • Pavers settling unevenly near the threshold. The base under the pavers has lost compaction, usually from water that got past the sill. Each wet season widens the dip.
  • Water pooling against the garage or door. The drainage slope has flattened or reversed. This is a grade problem, not a surface blemish, and it will keep returning until the slope is corrected.
  • Hairline cracks spreading across a concrete driveway. Shrinkage cracks are normal in the first year; cracks that widen and branch are telling you the slab is moving.
  • Loose sand in the joints and weeds pushing through. The joint sand has washed out and the polymeric or stabilization layer has failed, which lets water into the base.
  • Efflorescence, a white chalky film on the pavers. Moisture is migrating through the paver and depositing salts on the surface, which points back to drainage and base moisture.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Installers setting a new window and checking it for level

In Glendale, here is what the work typically runs, installed:

Scope Installed price range
Paver driveway installation $7,000 – $18,000
Concrete driveway installation $4,500 – $12,000
Asphalt driveway paving $3,500 – $9,000
Driveway replacement $5,000 – $14,000
Driveway sealing $250 – $700
Paver patio installation $3,500 – $11,000

The range is driven by square footage, how much base excavation the existing grade needs, drainage correction, and paver selection. Our quote separates materials from labor and states the warranty in writing. Every visit includes a documented photo record as standard, so you see the condition of the base before it’s covered.

DIY or Call Us?

An owner can safely do a few checks: measure the driveway, photograph the pooling after rain, confirm the ES Windows model label, and clean out joints. Where DIY goes wrong is the base. Compaction and drainage slope are the whole job, and re-setting pavers over a failed base just moves the problem a season down the road. Tearing out a slab or excavating to correct grade is heavy work that calls for trained hands. Call us at (844) 320-5930 and we’ll write the price before we touch a tool; the estimate is free, and we’ll review a competitor’s quote line by line at no charge.

FAQs

A second-story addition that matches the existing roofline

How long do ES Windows driveway and paver systems last in Glendale? A properly based paver driveway lasts 25 to 30 years, while concrete runs 20 to 30 before major repair. Glendale’s clay-heavy soil and seasonal rain shorten that if the base wasn’t compacted and drained right. Call (844) 320-5930 for a written quote; estimates are free.

Can the driveway and pavers be repaired instead of replaced? Often, yes. Isolated settling or washout can be re-set and re-sanded without a full replacement, while widespread base failure means replacement is the honest call. We’ll photograph the base and tell you which you’re looking at. Call (844) 320-5930 to schedule the assessment.

How long does the swap take? A paver driveway install typically takes three to six days, and a concrete pour needs cure time before you drive on it. Sealing is a single day. We put the schedule in the written scope before work starts. Call (844) 320-5930 for the timeline on your address.

How do you source parts for my ES Windows model? We confirm your series, measure the sill and transition detail, then order OEM or a matched aftermarket equivalent to your spec. We don’t carry parts on a truck; we order to the model. Under Clause 1 of the Haven Standard, the price is written before anyone starts, and no change proceeds without a signed change order. Call (844) 320-5930 to get that in writing.

Ready to price the work against your ES Windows product? Call Rowan Construction Group Glendale at (844) 320-5930 for a free estimate. Our technicians have up to 19 years of experience, crews are background-checked and uniformed, a live person answers calls 24/7, and the 365-Day Done Right Promise backs the result.

Written by the team at Rowan Construction Group Glendale, serving Glendale and nearby areas.

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A remodeled hall bathroom with subway tile and a floating vanityA wood double vanity with two mirrors after a bathroom remodelA finished backyard cottage with a small covered porchA new roof with clean valleys and new flashingA new stained cedar privacy fenceA new paver patio with a seat wall and fire pit

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Rowan in Glendale

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Glendale team

A local vetted partner works across Glendale and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 320-5930
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Rowan Construction Group Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch