A Rowan company - serving Glendale, CA
A living room with a wall of new windows and a sliding glass door
E
ES Windows · Glendale

ES Windows Windows & Doors in Glendale, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Glendale
New double-hung windows in a dining room
A new front entry door with glass sidelights
A galley kitchen opened up to the dining room with a new peninsula
A walk-in shower with large-format tile and a built-in niche
A remodeled family room with new windows and a window seat
A standing-seam metal roof over a covered porch
A new wood side gate with black hardware
A new concrete driveway with a paver border
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

ES Windows Windows & Doors: The Glendale Owner’s Guide

We repair and replace ES Windows windows and doors in Glendale, and a failed window or door part is usually an insulated glass unit that has fogged, a balance that no longer holds the sash, or a lock and roller set that has worn out. Most single-window repairs land between $250 and $900 depending on the part, while a full window replacement in Glendale runs $4,500 to $15,000 and impact-rated installation runs $8,000 to $25,000. We don’t promise same-day dispatch on planned window and door work, but we do put the price in writing before anyone touches the frame.

Call (844) 320-5930

Owners usually find out something’s wrong the same way. A bedroom sash drifts down an inch after you lift it. The glass on a north-facing unit goes cloudy between the panes. A patio door starts catching on the track in the afternoon and stops catching by evening. In Glendale, where inland heat pushes summer temps well past 95°F and the sun hits south and west elevations hard from May through October, the seals and hardware on ES Windows units age faster than the manufacturer’s lab numbers suggest. This page covers what fails, which series it applies to, what it costs, and where the DIY line sits.

We’re an independent service provider. We aren’t affiliated with ES Windows, and we don’t speak for the manufacturer. We repair and replace their products because Glendale homes have a lot of them, not because they’ve endorsed us.

Which ES Windows Models This Applies To

A new bay window with a cushioned seat

ES Windows built a large share of the vinyl and aluminum units in Glendale homes from the 1990s through the 2010s, and the parts you need depend on which line you have. If you can’t find the label, measure the visible glass width and height, the frame depth, and the sash thickness to the sixteenth of an inch, and photograph the hinge or lock side up close. That’s the information we need to match a part.

The OEM-versus-aftermarket decision matters here. ES Windows used several balance and hardware suppliers across its product lines, and in some vintages the original part is discontinued or sourced from a supplier that changed specs. A quality aftermarket balance, sash lock, or roller that meets the same dimensions and load rating will do the job, often for less than a legacy OEM part. What you don’t want is a “close enough” part forced into the frame; a balance rated for a lighter sash will fail within a season.

Two checkable specifics. First, the glass. If your ES Windows unit has a failed seal and the fogging is between the panes, the insulated glass unit, not the whole window, is what gets replaced, and we measure the IGU channel width and spacer type to order the correct assembly. Second, the screen and hardware. ES Windows screen frames and lock kits are dimension-specific. A generic sliding-door roller off a hardware store shelf often sits a few millimeters off the ES Windows track profile and will wear the track rail. Bring us the old part, or a photo with a ruler next to it.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your ES Windows Windows & Doors Is Failing

  • Fogging or condensation between the panes. The seal on the insulated glass unit has failed and moisture is inside the cavity. Cleaning the inside of the glass won’t help; the unit itself is the part that’s gone.
  • The sash won’t stay up, or slams down. A worn or broken balance, the spring-loaded mechanism that counterweights the sash. Vinyl balances lose tension with heat cycling, which is why Glendale owners notice it in late summer.
  • The lock won’t catch, or the sash won’t close flush. A misaligned keeper or a warped sash, sometimes both. A sash that doesn’t sit flush lets in the heat you’re paying to keep out.
  • The sliding door drags or jumps the track. Worn rollers or a track with debris and grit embedded in it. Left alone, a bad roller wears a groove in the rail, and that turns a $40 part into a track repair.
  • Drafts, water stains, or a soft frame edge. Failed weatherstripping or a compromised seal at the frame-to-wall junction. In Glendale’s dry heat the foam and felt can degrade quietly for years before a wet winter finds the gap.

None of these are cosmetic. A failed balance on a heavy sash can drop it without warning, and a compromised frame seal is the entry point for water. If you see soft wood or bubbling paint at the frame edge, stop and get it looked at before the next rain.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Installers setting a new window and checking it for level

Here’s what window and door work runs in Glendale, installed, as a flat written price:

Work Installed Price Range
Window replacement (standard) $4,500 – $15,000
Impact-rated window installation $8,000 – $25,000

Single-part repairs (one balance, one lock set, one roller, one IGU swap) fall well below the replacement ranges; the range above is for full units. The number that lands on your quote depends on how many openings, the glass package, the frame material, and whether the rough opening needs any repair once the old unit comes out.

What’s included is the point. You get a written price before any work starts, a written scope, and a written warranty. If we find rot or a failed flashing behind the frame, we don’t improvise and hand you a bigger bill; the change waits for your signed change order under Clause 1 of The Haven Standard. We also offer a free second opinion on any written estimate you’ve already got, reviewed line by line at no charge. And every visit includes a documented photo record of what we found and what we did, as a standard deliverable.

DIY or Call Us?

Some of this you can safely check yourself. Look at the label inside the frame or on the glass edge for the ES Windows model info. Clean the door track with a stiff brush and vacuum, then see if the drag goes away. Check whether the fogging is between the panes or on the surface. Feel for drafts along the frame with the back of your hand.

Where DIY goes wrong: replacing a balance or swapping a sash on a tall or heavy unit, and any repair that involves the frame-to-wall seal, flashing, or glass. A dropped sash is a real injury risk, and a window re-sealed wrong is a water leak that shows up a season later and costs more than the original repair. We’d rather you call and get it done once. Call (844) 320-5930 for a free estimate, and we’ll tell you honestly whether it’s a part or a unit.

FAQs

A new white vinyl privacy fence with a double gate

How long do ES Windows units and parts last in Glendale? A vinyl window in Glendale typically lasts 15 to 25 years, and the balances and hardware often go first at 10 to 15 years because of heat cycling. Glendale’s summer heat and intense west-facing sun wear seals and plastic parts faster than a mild coastal climate would. Call (844) 320-5930 for an exact assessment of your unit.

Can the part be repaired instead of replacing the whole window? Often yes. A balance, lock, roller, or a single fogged insulated glass unit can usually be replaced on its own, which costs far less than a full window. If the frame or sash is warped or the frame seal is compromised, a partial repair may not hold, and we’ll tell you that plainly. Call (844) 320-5930 and we’ll give you a written price either way.

How long does the swap take once we’re scheduled? A single part or one glass unit is usually a short visit, and a whole home’s set of windows is a day or more depending on the count and access. We confirm the timeline in writing with the quote so there’s no guessing on the day. Call (844) 320-5930 to schedule your free estimate.

How do you source an ES Windows part? We identify your series from the frame label or precise measurements and photos, then match OEM or a quality aftermarket equivalent that meets the same dimensions and rating. We tell you which we’re using and why before we order. Call (844) 320-5930 with your photos, or bring the old part, and we’ll price it.

We also service related brands across our other trades, including KraftMaid, Cambria, and Silestone for kitchens and baths, so the same crew that fixes your window works from the same written-price discipline.

Ready to stop guessing about your ES Windows part? Call Rowan Construction Group Glendale at (844) 320-5930 to schedule your free estimate. You’ll get a flat written price, a written scope, the Free Second Opinion option if you already have a quote, and the 365-Day Done Right Promise backing the work. License on request, technicians background-checked and uniformed, and a live person answers the phone.

Written by the team at Rowan Construction Group Glendale, serving Glendale and nearby areas.

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A new stained cedar privacy fenceA new paver patio with a seat wall and fire pitA remodeled primary bathroom with a soaking tub and walk-in showerA single-story rear room addition with tall windows and a new patioA new clay tile roofA new front yard fence with a matching gate

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Rowan in Glendale

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Glendale team

A local vetted partner works across Glendale and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 320-5930
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Rowan Construction Group Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch