A Rowan company - serving Glendale, CA
A living room with a wall of new windows and a sliding glass door
C
CWS · Glendale

CWS Windows & Doors in Glendale, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Glendale
A new multi-panel patio door opening a kitchen to the patio
New double-hung windows in a dining room
A new curved paver walkway to the front porch
A galley kitchen opened up to the dining room with a new peninsula
A walk-in shower with large-format tile and a built-in niche
A remodeled family room with new windows and a window seat
A standing-seam metal roof over a covered porch
A new wood side gate with black hardware
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

CWS Windows & Doors: The Glendale Owner’s Guide

We install and service CWS windows and doors across Glendale, and a typical part-level repair runs $150 – $650 installed, while a full window or door swap runs $4,500 – $15,000 depending on size and series. The symptom that brings most Glendale owners to this page is mechanical: a window that won’t stay up, a sash that drags or won’t latch, or a door that swings open on its own. CWS hardware fails in identifiable patterns, and knowing which one you have tells you whether you need a $40 part or a new unit.

Call (844) 320-5930

Key takeaways:

  • Most CWS failures in Glendale are hardware, not glass.
  • Model and series numbers are printed on the jamb or on the glass spacer.
  • Coastal air and inland heat both shorten hardware life here.

Which CWS Models This Applies To

A new front entry door with glass sidelights

CWS (Craftline Windows & Systems) builds primarily for the California replacement market, and most units we encounter in Glendale homes are from the Series 400, 600, or 800 lines. The series number matters because each line uses a different balance system and hardware footprint, and a part that fits a 400 won’t seat in an 800. Identification is straightforward once you know where to look: the model sticker sits on the jamb, usually at the hinge side or top corner, and a glass spacer stamp etched on the corner of the unit lists the series and date of manufacture.

If the sticker has been painted over or removed, we measure instead: sash width, frame depth, and the balance channel dimension. For Glendale owners deciding between OEM and aftermarket, the honest answer is that aftermarket balances and weatherstripping from reputable makers meet or exceed the OEM spec for most 400 and 600 series, while hinges and locking hardware on the 800 line are worth sourcing to OEM spec because the tolerance is tighter. We handle that sourcing decision as part of the quote, and we’re an independent service provider, not affiliated with CWS.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your CWS Windows & Doors Is Failing

  • A sash that won’t stay up. The balance spring or block has lost tension, a common failure after several years of Glendale’s inland heat cycling the assembly. It usually fails on the sunny side of the house first.
  • Dragging or binding when you slide or crank. Rollers wear flat or the track accumulates grit; left alone, the sash frame begins to rack and the repair cost climbs.
  • Fogging between the panes. The insulated glass unit’s seal has failed, letting moisture in. This isn’t a cleaning problem, it’s a unit replacement.
  • Drafts or whistling at the frame. Weatherstripping and sweeps compress and harden over time; a dollar’s worth of seal can restore a tight seal before it becomes a bigger draft issue.
  • A door that won’t latch or swings open. The striker and hinge alignment has shifted, often after the slab swells with seasonal moisture. Adjustable hardware can fix this without replacement.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Installers setting a new window and checking it for level

For Glendale, expect these installed ranges, with labor, hardware, and disposal included in each:

Work Installed Range
Hardware and balance repair $150 – $650
Insulated glass unit replacement $250 – $800
Window replacement (per unit) $4,500 – $15,000
Impact window installation $8,000 – $25,000

What drives the number is series complexity, glass spec (tempered, low-E, impact-rated), and whether the existing frame is sound enough to reuse. We give you a written price with a written scope before any work starts, and the 365-Day Done Right Promise backs the labor for a full year.

DIY or Call Us?

Owners can safely check the obvious: clean the track, confirm the weatherstripping isn’t torn, and see whether the sash moves freely once grit is cleared. What we’d steer you away from is removing a sash to replace a balance yourself. The balance is under tension, and if it releases wrong it can snap back hard, or drop a sash that weighs 30 – 50 pounds. On the 800 series and impact-rated units, the sash removal sequence differs from residential lines, and getting it wrong cracks the frame. If the sash is fogged, dragging, or won’t stay up, that’s the point to call us at (844) 320-5930 for a free estimate.

FAQs

A single-story rear room addition with tall windows and a new patio

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A garage converted into a guest room and home officeNew architectural shingles with a clean valleyA new white vinyl privacy fence with a double gateA new stained cedar privacy fenceA new paver patio with a seat wall and fire pitA remodeled primary bathroom with a soaking tub and walk-in shower

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Rowan in Glendale

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Glendale team

A local vetted partner works across Glendale and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 320-5930
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Rowan Construction Group Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch