







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Home Additions & ADU: The Glendale Owner’s Guide
A CGI-compatible home addition in Glendale typically runs $45,000 – $130000 installed, while an ADU built to match CGI plans and specs lands between $90,000 and $220,000. Every project is quoted with a flat written price and written scope before a permit is pulled, and no work starts until that number is signed. If you’re holding CGI drawings and a lender or city letter that needs action, that quote is your next real step.
Owners rarely start with a parts question in the pure sense. They start with a set of CGI plans, a failed inspection correction, or a contractor who stopped returning calls halfway through framing. In Glendale, a lot of these conversations begin at the city counter: someone pulled an addition permit on CGI-stamped drawings, then discovered the contractor never filed the structural calc package the plan check requires. The failure shows up as a red tag on the front door. That’s usually when we hear from them.
Key Takeaways
- CGI home additions in Glendale sit at $45,000 – $130000; ADUs run $90,000 – $220,000.
- Glendale plan check scrutinizes ADU setbacks and hillside grading more than most neighboring cities.
- Every Rowan project gets a written flat price, a signed change order for any scope move, and a documented photo record.
- Our technicians bring up to 19 years of experience, and calls are answered by a live person 24/7.
- We’re an independent contractor and aren’t affiliated with CGI.
Which CGI Models This Applies To

CGI is a plan-and-parts sourcing catalog, so the “model” here is the specific plan set you bought – typically a CGI-labeled addition series, an ADU studio or one-bedroom plan, or a garage-conversion package. The identifying detail lives on the plan cover sheet and the specification schedule: the plan number, the revision letter, the structural sheet for your foundation type, and the finish schedule that names the fixtures. Before we quote anything, we read those sheets and compare them against what was actually permitted.
This matters because a CGI plan set sold as a standard package often carries substitutions that were never resolved at purchase: a slab-on-grade structural sheet paired with a raised-floor site, or a bathroom schedule naming fixtures that don’t match what’s available in the current catalog. Under Glendale’s plan check, that mismatch stops the permit. Where the schedule names cabinets or stone, we’re quoting KraftMaid or Wellborn for cabinets, and Cambria, Caesarstone, or Silestone for tops, so the written number reflects a real product rather than a placeholder line.
The OEM-versus-aftermarket question is different for additions than for a mechanical part. There’s no “aftermarket” plan – but there are legitimate substitutes for the specs inside it, and the honest way to handle that is to write the substitution into the scope before it’s built rather than swap material silently. If you’re holding a competitor’s quote, our free second opinion reviews it line by line at no charge, and we’ll tell you where a spec substitute is fine and where the city will reject it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CGI Home Additions & ADU Is Failing
- A red-tag or correction notice after plan check. Usually a structural calc package missing, a setback revised after submittal, or a foundation sheet that doesn’t match the site.
- A contractor who disappeared mid-framing. The most common reason we’re called. Framing is up, the permit clock is running, and nobody’s answering.
- Water intrusion at the new roofline tie-in. In Glendale’s older 1920s – 1950s housing stock, additions most often leak where the new roof meets the existing one, usually because flashing and underlayment were rushed.
- A change order that ballooned. A cost that moved 20 – 40% above the original number mid-project is the classic sign the original scope was thin. Rowan’s discipline is a signed change order before any work on that change proceeds.
- An ADU that failed final inspection. Often the fire separation between garage and living space, or an egress window measured wrong at framing.
Replacement Cost & What’s Included

Here’s the Glendale range, in dollars, so you can screenshot it and compare:
| Project | Installed price range |
|---|---|
| Home addition | $45,000 – $130000 |
| ADU construction | $90,000 – $220,000 |
| Garage conversion | $30,000 – $80,000 |
What drives the number: square footage, whether you’re on a hillside lot (common in Glendale, and it typically means a retaining wall and engineering), foundation type, and how far the utility tie-ins run. Cabinets and countertops move it too – a KraftMaid or Wellborn kitchen runs more than a stock line, and Cambria or Silestone command more than a laminate.
The quote is a flat written price with a written scope and a written warranty, and it’s handed to you before any work starts. That’s the whole point of Clause 1 of The Haven Standard: a written price first, every time. Our technicians bring up to 19 years of experience, background-checked and uniformed, and every visit includes a documented photo record as standard – so you have evidence of what was found and what was done. The 365-Day Done Right Promise puts it in writing: if it’s not done right, we make it right.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Owners can safely read the plan set and compare revision letters, photograph the permit card, and gather every correction notice the city issued. What shouldn’t go without a licensed professional is the structural work and the electrical and gas tie-ins – an addition or ADU involving panel capacity, gas line extensions, or hillside framing is genuinely dangerous to shortcut, and most Glendale failures we see trace back to someone treating a permit item as a formality.
Where DIY goes wrong most often: assuming the CGI drawings are build-ready without the structural calc package, and pulling a permit before confirming the setback against the site survey. Both stop the project at plan check. Call (844) 320-5930 – we’ll tell you exactly where the drawings stand and what’s missing, no charge.
FAQs

Built to code with proper flashing, an addition should hold 50-plus years, and an ADU the same. What shortens that in Glendale specifically is sun and the rain season hitting the roofline tie-in first – they matter more than raw durability of the frame. Call (844) 320-5930 for a quote that accounts for how the new roofline meets your existing roof.
Sometimes yes. A failed inspection correction or a missing calc package is a repair to the paperwork and often to a specific detail – not a full rebuild. A contractor who vanished mid-project is a management problem you can fix without tearing down what’s framed. Bring the competitor’s written estimate and we’ll review it line by line at no charge.
A home addition usually takes several months from permit to final inspection, an ADU longer, and a garage conversion shorter. The honest variable is Glendale’s plan check timing, not the framing. We give you a written scope and schedule before we start so the timeline is on paper.
We don’t carry stock and we don’t hold inventory – we read your CGI plan number, revision letter, and specification schedule, then source materials from matching lines like KraftMaid, Wellborn, Cambria, Caesarstone, or Silestone. That way the quote reflects a real product, not a placeholder. Call (844) 320-5930 for a free estimate.
Get Your Written Number in Glendale
If you’ve got a CGI plan set and a decision to make, the best next move is a written price you can hold up against any other quote. We’re an independent contractor, not affiliated with CGI. Call Rowan Construction Group Glendale at (844) 320-5930 to schedule your free estimate – the price is written before anyone picks up a tool, and no change proceeds without your signed change order.
Written by the team at Rowan Construction Group Glendale, serving Glendale and nearby areas.












